RSAM5800AUPGX56

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS RSAM-5800 Analog QAM RF and MPEG Video Probe Key Features • Monitor and troubleshoot analog and digital video as well as DOCSIS® services • Web-based access to live and historical MPEG and RF measurements • Simple network management protocol (SNMP) trap forwarding to up to five destinations • Monitor MPEG stream errors (TR 101 290 Priority 1, 2, and 3) and drill down to analyze individual program performance • Easily access performance history (RF, QAM, and MPEG) stored in MySQL relational database Applications • Segments problems to a master headend, local headend/hub, or outside plant by comparing RF and MPEG trends from a common edge device or across multiple headends/hubs • Monitors TR 101 290 MPEG parameters for both DVB and ATSC providing worldwide support • Remotely troubleshoots problems using Web-based access to live and historical RF and MPEG measurements Benefits The JDSU RSAM-5800 Remote Service Analyzer Module provides remote analysis of forward path digital and analog signals. It is specifically designed for deployment in remote, unmanned hub sites or headend locations. The RSAM-5800 combines the extensive knowledge of JDSU in both radio frequency (RF) and Moving Picture Experts Group (MPEG) analysis to quickly identify real customer-affecting issues down to the individual program without having to deploy specialists to remote hub sites. The RSAM RF and MPEG probes provide remote monitoring and analysis with detailed views of channel performance to the field, headend, and network operations center (NOC) technicians using Windows® Internet Explorer®. Simply viewing the QAM (quadrature amplitude modulation) stack with a spectrum analyzer or measuring and monitoring MER and BER (modulation and bit error rates) on QAM carriers provides absolutely no insight into MPEG video payloads. It is critical for cable network operators to have system-wide visibility into the underlying content or MPEG protocol layer to ensure the quality of programming content and other MPEG parameters such as PCR jitter (timing) and continuity count for both digital video broadcasting (DVB) and Advanced Television Systems Committee (ATSC). The award winning RSAM-5800 helps segment video problems in minutes—not hours—by proactively monitoring video, voice over Internet Protocol (VoIP), and high-speed data (HSD) carriers for RF and MPEG impairments. • Eliminate truck rolls to segment RF and video problems • Ensure that required truck rolls are deployed to the right place with the right personnel and equipment • Increase network availability using notification of forward path degradation before service is disrupted • Intelligently filter alarms based on severity to appropriately alert local operations and NOC personnel WEBSITE : www.jdsu.com/test RSAM-5800 Specifications Frequency Range Accuracy Tuning resolution Channel bandwidth 50 to 1,000 MHz ±10 ppm at 25°C (77°F) Analog 10 kHz, Digital 50 kHz RSAM-5800A 8 MHz RSAM-5800B 6 MHz EVM3 Accuracy Range Accuracy Symbol rate Level Measurement, Analog Signal types CW,Video, and Single and Dual Audio (NTSC, PAL and SECAM) Range –40 to +60 dBmV1 Resolution 0.1 dB Resolution bandwidth 280 kHz Accuracy2 ±1.5 dB typical @ 25°C Range 64 QAM: 1.2 to 5.8% ±0.5% (1.2 to 2.0%) ±1.0% (2.1 to 4.0%) ±1.4% (4.1 to 5.8%) 256 QAM: 1.1 to 2.4% ±0.6% Annex A: 5.057 to 6.952 Msps for 64 and 256 QAM Annex B: 5.057 Msps for 64 QAM; 5.361 Msps for 256 QAM Annex C: 5.274 Msps for 64 QAM; 5.361 Msps for 256 QAM Operating temperature range 5 to +45°C (41 to 113°F) Storage temperature range –20 to +50°C (0 to 120°F) Power supply input 47–63 Hz, ~110 VA,100–265 VAC MPEG TR101-290 Measurements Priority 1 – Synch loss error – Synch byte error – PAT error – Continuity count error – PMT error – Referenced PID error Priority 2 – Transport error – CRC error – PCR repetition error – PCR discontinuity error – PCR accuracy error – PTS error – CAT error Priority 3 – Unreferenced PID error – Program and system integration protocol (PSIP) error (ATSC) – SI error (DVB) Typical detectable range Accuracy for levels between –20 to 55 dBmV; additional uncertainty ±0.5 dB across 3 Accuracy and behavior from 50 to 1,000 MHz for levels between 0 to 50 dBmV (typical) 1 2 Standards Compliance Shock and vibration Drop Handle stress Safety—emissions Safety—immunity IEC 60068 IEC 61010 IEC 61010 EN 55022 EN 61000 Level Measurement, Digital Modulation types Range Resolution Resolution bandwidth Accuracy2 QPSK, QAM (16, 64, 256) DVB/ACTS –20 to +50 dBmV1 0.1 dB 280 kHz ±2.0 dB typical @ 25°C Interfaces RF RS232 Ethernet AUX 75Ω, F81 or BNC option Max. sustained voltage 100 VAC, 140 VDC Standard via DB-9 Supports RJ45, 10BaseT,TCP/IP, and UDP TTL-compatible output for controlling accessories Downstream QAM Demodulation Modulation types Input range (lock range) MER3 Accuracy 64 and 256 QAM, ITU-T J.83 –15 to +50 dBmV total for 256 QAM Range 256 QAM: 28 to 35 dB Range 64 QAM: 21 to 35 dB ±2.0 dB typical General Dimensions Weight 48.3 x 34.3 x 8.9 cm (19 x 13.5 x 3.5 in) 3.4 kg (7 lb 7oz) Ordering Information Model RSAM-5800A RSAM-5800B RSAM-MPEG RSAMMPEG-UG-FLD ISS-5116 PVM Server Software PVM Client Software Hardware Upgrades RSAM-5600B to RSAM-5700B RSAM-5800A-UPGX RSAM-5800B-UPGX RSAM-5800A-UPGX RSAM-5800B-UPGX Part Number RSAM5800A RSAM5800B RSAM-MPEG RSAMMPEG-UG-FLD 1010-00-0906 PVM-SERVER PVM-CLIENT RSM5700B-UG-FAC RSAM58ARFUPGX56 RSAM5800BUPGX57 RSAM5800AUPGX56 RSAM5800BUPGX56 Description Remote Service Analyzer Module—RF Video Probe—Rack-mounted RF/QAM analyzer (8 MHz tuner), including RF monitoring. This unit is field upgradeable to add MPEG. Remote Service Analyzer Module—RF Video Probe—Rack-mounted RF/QAM analyzer (6 MHz tuner), including RF monitoring. This unit is field upgradeable to add MPEG. Factory installed—Add MPEG capability for RSAM-5800 at time of purchase. Field upgrade—Add MPEG capability in the field for RSAM-5800, does not include calibration. 16x1 RF Input Selector Switch for RSAM—20 MHz to 1 GHz PathTrak™ Video Monitoring (PVM) Server and Client software includes 5 client licenses. Provides Web access for live troubleshooting and displaying performance history. PathTrak Video Monitoring (PVM) Client software—Supports configuration and access to RSAM-5700 and RSAM-5800 probes. Upgrade RSAM-5600B to RSAM-5700B for RF monitoring applications. Includes calibration and deep interleave upgrade (factory upgrade). Exchange RSAM-5600A for an RSAM-5800A with RF ONLY (without the MPEG option). Exchange RSAM-5700B for an RSAM-5800B with the MPEG option. Exchange RSAM-5600A for an RSAM-5800A with the MPEG option. Exchange RSAM-5600B for an RSAM-5800B with the MPEG option Test & Measurement Regional Sales N ORTH AMERICA TOLL FREE : 1 866 228 3762 FAX : +1 301 353 9216 LATIN AMERICA TEL : +1 954 688 5660 FAX : +1 954 345 4668 ASIA PACIFIC TEL : +852 2892 0990 FAX : +852 2892 0770 EMEA TEL : +49 7121 86 2222 FAX : +49 7121 86 1222 30162564 000 1208 www.jdsu.com/test Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation RSAM5800.DS.CAB.TM.AE December 2008