50PA-389

SPECIFICATION SHEET JFW MODEL 50PA-389 HANDOVER TEST SYSTEM JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com Frequency Range Configuration Impedance VSWR Insertion Loss Attenuation Range Attenuation Accuracy (guaranteed monotonic) Power Divider Isolation RF Input Power Switching Speed 800-3000 MHz 12 x 4 Handover Test System See block diagram 092-5634 50 Ohms nominal 1.5:1 typical 1.7:1 maximum 29.2 dB typical @ 800 MHz 33.7 dB typical @ 3000 MHz 0-127 dB in 1 dB steps ± 0.5 dB or 2% (typical) ± 0.75 dB or 2% (maximum) 20 dB minimum +25 dBm operating +30 dBm (no damage) 10 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) 100-240 VAC @ 47-63 Hz Keypad and LCD display Ethernet (10/100) and RS-232 Set Attenuator Read Attenuator Fade Attenuator Handover Variable Handover Change Baud Rate (SAx y ) (RAx ) (FAx y z t ) (HNDx y t) (VHND Av Aw Vx Vy Tz) (CBx ) AC Supply Manual Control Remote Control Remote Commands Baud Rates (RS-232 mode) RF Connector Temperature Range Physical Size 9600, 19200, or 38400 Baud SMA female 0ºC to +50ºC See outline drawing 092-5635 --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F SPECIFICATION SHEET JFW MODEL 50PA-389 HANDOVER TEST SYSTEM JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com ECR/ECN # 15109 15431 Page 2 of 2 DATE 11/19/2007 01/03/2008 02/25/2008 REV A B APPR / DATE TRS 11/19/2007 TRS 01/03/2008 TRS 02/25/2008 ECR/ECN # 15916 16179 DATE 05/28/2008 08/07/2008 REV C D APPR / DATE TRS 05/28/2008 TRS 08/07/2008 JFW FORM E-7-F REV F