50PA-504

SPECIFICATION SHEET JFW MODEL 50PA-504 BENCHTOP PROGRAMMABLE ATTENUATOR ASSEMBLY Frequency Range Configuration Impedance Attenuation Range VSWR Attenuation Accuracy (guaranteed monotonic) 200-6000 MHz JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com Two individually controlled solid-state programmable attenuators 50 Ohms nominal 0-63 dB in 1 dB steps 1.8:1 maximum 1.6:1 maximum 200-800 MHz 800-6000 MHz ± 0.50 dB 1-3 dB ± 0.75 dB 4-7 dB ± 1.00 dB 8-11 dB ± 1.25 dB or 4% 12-63 dB (whichever is greater) 6.0 dB maximum 5.0 dB typical +20 dBm average +25 dBm (no damage) 1 microsecond typical (after command is received and processed) (3 milliseconds typical processing time) 100-240 VAC @ 47-63 Hz 20-Button Keypad and LCD display RS-232 (9600, 19200, or 38400 Baud) Ethernet (TCP, 10/100, up to 4 users) Insertion Loss RF Input Power Switching Speed AC Supply Manual Control Remote Control --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F SPECIFICATION SHEET JFW MODEL 50PA-504 BENCHTOP PROGRAMMABLE ATTENUATOR ASSEMBLY Remote Commands JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com Attenuator Control Commands: Set Attenuator, Set Attenuator with Response, Read Attenuator, Set All Attenuators, Read All Attenuators, Set Multiple Attenuator, Fade Attenuator, Variable Handover, Store, Recall System Commands: Identification, Pause -RS-232 Only: Change Baud -Ethernet Only: Disconnect, Close, Message, Clear RF Connector Operating Temperature Range Physical Size SMA or N female 0ºC to +50ºC See outline drawing 092-5984 (N) 092-5985 (SMA) ECR/ECN # 17674 17974 Page 2 of 2 DATE 08/06/2009 09/11/2009 12/16/2009 REV A B APPR / DATE CLK 08/06/2009 CLK 09/11/2009 CLK 12/16/2009 ECR/ECN # DATE 18146 01/22/2010 REV C APPR / DATE CLK 01/22/2010 JFW FORM E-7-F REV F