50S-1268

SPECIFICATION SHEET JFW MODEL 50S-1268 1P2T SOLID STATE RF SWITCH JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com Frequency Range Configuration Impedance VSWR Insertion Loss Isolation Switching Speed RF Input Power 100-500 MHz 1P2T 50 Ohms nominal 1.25:1 maximum 0.5 dB maximum 55 dB minimum 40 microseconds (50% TTL to 10% or 90% RF) 100 Watts average (cold switch) 500 Watts peak (cold switch) 100 Watts average (hot switch*) Control (1 line) TTL Low for J1-COM TTL High for J2-COM (off port is reflective) +12Vdc to +15 Vdc @ 250 mA nominal +5 Vdc @ 40 mA nominal BNC, SMA, TNC or N female -20ºC to +70ºC -55ºC to +85ºC See outline drawing 092-3022 DC Supply RF Connector Operating Temperature Range Storage Temperature Range Physical Size * If switch rate exceeds 1000 cycles per second, external heatsinking will be required to maintain a maximum case temperature of +70ºC. ECR/ECN # 9999 15778 Page 1 of 1 DATE 04/03/2002 02/10/2003 04/30/2008 REV A B APPR / DATE TRS 04/28/2004 BAC 04/30/2008 ECR/ECN # DATE REV APPR / DATE JFW FORM E-7-F REV F