CD29HQH

CD 29H QH Series 5 000 h at 105°C · Long Useful Life · Highest Ripple Current · Miniaturized · Industrial Power Supplies and Inverters CD 29H QH highest current CD 299 PG longest life higher current CD 294 BW 105°C longer life CD 296 KC longer life CD 297 BB CD 293 BZ Item Operating Temperature Range (°C) Voltage Range (V) Capacitance Range (µF) Capacitance Tolerance (20°C, 120Hz) Leakage Current (µA) Characteristics -40 ~ +105 160 ~ 450 47 ~ 2 200 ± 20% After 5 minutes at 20°C application of rated voltage, leakage current is not more than 0,01CV or 1,5mA, whichever is smaller C: Nominal Capacitance (µF) V: Rated Voltage (V) Rated Voltage (V) 160 200 20 0 00 0 Dissipation Factor (20°C, 120Hz) Tan δ (max) Rated Voltage (V) 0,15 160 ~ 0 0,12 Stability at Low Temperature (Impedance Ratio at 120Hz) Z -40°C / Z +20°C 4 Snap-In Useful Life Lifetime Leakage Current Capacity Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level  000h >100 000h Load Life 3 000h Endurance Test 3 000h 1 000h Shelf Life Not more than specified value Within ± 30% of initial value Not more than 300% of specified value Not more than specified Not more than specified value value Within ± 20% of initial value Not more than 200% of specified value Within ± 20% of initial value Not more than 130% of specified value Not more than specified value Within ± 20% of initial value Not more than 200% of specified value UR IR 105°C ≤ 1% Failure Rate UR 1,4 x IR 50°C UR IR 105°C UR IR = 0 105°C UR = 0 IR = 0 105°C ≤ 1% Failure Rate guaranteed After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Frequency Coefficient 3.0 Lifetime Diagram 50Hz 0,87 120Hz 1,00 1kHz 1,15 10kHz 1,35 100kHz 1,40 Frequency Coefficient IA ––– 2.5 IR 2.0 1.5 1.0 CD 29H QH Series X32 0.5 0.0 40 X16 X8 X4 X2 X1 Lifetime Multiplier 50 60 70 80 90 100 110 TA (˚C) IA = actual ripple current at 120Hz, IR = rated ripple current at 120Hz, 105°C Multiplier of Useful Life as a function of ambient temperature and ripple current load 62 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 CD 29H QH Series Ratings for CD 29H QH Series VDC (Surge Voltage) Code (V) Rated Capacitance (µF) 330 390 470 560 680 Max ESR 20°C, 120Hz (mΩ) 603 511 424 356 356 356 293 293 243 243 243 243 199 199 199 166 166 166 133 133 111 91 905 737 603 603 511 424 424 424 356 356 293 293 293 293 243 243 243 199 199 166 166 133 111 91 1 106 905 905 737 603 603 603 511 511 424 424 424 356 356 356 293 293 243 243 199 199 166 133 Typ ESR 20°C, 120Hz (mΩ) 355 306 245 210 210 210 175 175 145 145 145 145 119 119 119 99 99 99 79 79 73 58 550 460 370 370 310 260 260 260 220 220 180 180 180 180 150 150 150 120 120 100 100 80 68 56 620 570 570 470 380 380 380 325 325 268 268 268 225 225 225 185 185 153 153 125 125 105 85 Max Ripple Current 105°C, 120Hz (Arms) 1,50 1,60 1,80 2,10 2,20 2,10 2,60 2,50 2,80 2,70 2,90 2,80 3,30 3,40 3,30 3,70 3,80 3,60 4,40 4,30 4,40 5,90 1,10 1,17 1,40 1,40 1,45 1,55 1,55 1,60 1,65 1,65 1,68 1,92 1,92 2,20 2,20 2,20 2,40 2,40 2,40 2,75 2,75 3,45 4,00 4,50 1,00 1,20 1,20 1,25 1,30 1,35 1,35 1,40 1,45 1,65 1,65 1,65 1,85 1,85 1,85 2,20 2,20 2,50 2,50 2,90 2,90 3,30 3,80 Size Ø DxL (mm) 22 x 25 25 x 25 22 x 35 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 30 22 x 35 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 30 x 45 30 x 50 30 x 50 35 x 40 35 x 45 35 x 50 VDC (Surge Voltage) Code (V) Rated Capacitance (µF) 68 100 120 150 Max ESR 20°C, 120Hz (mΩ) 2 926 1 990 1 990 1 658 1 327 1 327 1 327 1 106 1 106 1 106 905 905 905 737 737 737 603 603 511 511 424 356 3 387 2 341 1 941 1 941 1 592 1 592 1 327 1 327 1 327 1 062 1 062 1 062 885 885 885 885 724 724 724 590 590 590 483 483 409 409 339 285 2 843 2 341 1 941 1 592 1 592 1 592 1 327 1 327 1 062 1 062 1 062 1 062 885 885 724 724 724 590 590 483 483 409 339 Typ ESR 20°C, 120Hz (mΩ) 1 280 1 060 1 060 880 700 700 700 580 580 580 480 480 480 390 390 390 320 320 270 270 225 190 1 835 1 260 1 050 1 050 860 860 718 718 718 575 575 575 479 479 479 479 292 292 292 319 319 319 260 260 220 220 183 154 1 360 1 170 970 790 790 790 660 660 530 530 530 530 440 440 360 360 360 295 295 240 240 205 170 Max Ripple Current 105°C, 120Hz (Arms) 0,70 0,87 0,87 0,90 0,98 1,02 1,02 1,11 1,11 1,12 1,16 1,20 1,20 1,26 1,31 1,26 1,45 1,45 1,58 1,58 1,69 1,89 0,40 0,48 0,57 0,56 0,65 0,65 0,71 0,71 0,71 0,85 0,85 0,85 1,00 1,00 1,00 1,00 1,20 1,20 1,20 1,35 1,35 1,35 1,60 1,60 1,80 1,80 2,10 2,30 0,50 0,60 0,65 0,72 0,72 0,72 0,80 0,80 0,95 0,95 0,95 0,95 1,05 1,05 1,30 1,30 1,30 1,50 1,50 1,90 1,90 1,90 2,20 Size Ø DxL (mm) 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 30 x 30 22 x 50 25 x 40 35 x 25 25 x 50 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 22 x 35 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 180 350 (400) 2V 160 (200) 2C 820 220 1 000 270 330 390 470 560 47 68 82 100 120 1 200 1 500 1 800 2 200 220 270 330 390 470 560 200 (250) 2D 150 400 (450) 2G 680 180 820 1 000 1 200 1 500 1 800 2 200 180 220 270 330 390 250 (300) 2E 470 220 270 330 390 470 560 56 68 82 100 120 560 680 820 1 000 1 200 1 500 450 (500) 2W 150 180 220 270 330 390 470 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 6 Snap-In Part Number System Order Code SMD, Radial, Snap-In EC Technology EC = Electrolytic Capacitor PC = Polymer Capacitor R Terminal Type SMD Radial =V =R 1C Rated Voltage Code For coding please refer to the pages of ratings PT Series Code CD VS CD VH CD VZ CD 261 CD 262 CD 26 CD 269 CD 281 CD 28 CD 287 CD 28L CD 29 CD 29 CD 29 CD 296 CD 297 CD 299 101 Capacitance Code (in µF) 1,0 = 010 100 = 101 1 000 = 102 M Capacitance Tolerance = M SMD: =K Taped FF Lead Form 2 Terminal/ Pitch Size = FF 0611 Dimension 4x7 = 0407 = 0511 = 3580 JE xxxxx for Specials only = BS = VH = VZ = LK 0,47 = R47 ±20% ±10% Terminal = T2 2,0mm 2,5mm 3,5mm 5,0mm 7,5mm = 20 = 25 = 35 = 50 = 75 5x11,5 35x80 Snap-In = S 2,2 = 2R2 +30 / -10% = Q +50 / -10% = T Radial: Long Lead = LL 6,3x11,5 = 0611 = CB = CC CD 261X = QX Cut 5,0mm Cut ,mm 45x100 = 45100 = QM 10 000 = 103 = BK = PH = LL = XY = GC = QL = BZ = BW = BC = KC = BB = PG Cut 4,0mm Cut 3,5mm Cut 3,0mm = CD = CE = CF 10,0mm = 10 12,5mm = 12 on request: alternative lead forms (axial, 90° - angle, others) Snap-In: 4,0mm Pin Length Soldering Pin preferred = T4 = S4 2 Pin 3 Pin 4 Pin 5 Pin = P2 = P3 = P4 = P5 6,mm Pin Length = T6 CD 29D = HR CD 29H = QH CD 29L HCP HPM HVC = QL = CP = PM = VC Technical Specification SMD Type Dimensions Ø DxL  x ,  x , 6, x , 6, x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 A B C E L W 1,8 4,3 4,3 1,0 5,4 2,1 5,3 5,3 1,3 5,4 2,4 6,6 6,6 2,2 5,4 2,5 6,6 6,6 2,2 7,7 2,9 8,3 8,3 3,1 10,5 2,9 8,4 8,4 3,1 11,8 3,2 10,3 10,3 4,5 10,5 3,2 10,4 10,4 4,5 12,7 in mm 0,5 - 0,8 0,7 - 1,1 Taping Dimensions Size (DxL) w ± 0, A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 11,8 10 x 10,5 10 x 12,7 12,0 12,0 16,0 16,0 24,0 24,0 24,0 24,0 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 8,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 5,8 5,8 5,8 8,4 11,0 12,3 11,0 14,0 5,5 5,5 7,5 7,5 11,5 11,5 11,5 11,5 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 6,3 8; 10 Polymer 14 ± 1 18 ± 1 25 ± 1 25 ± 1 50 ± 1 50 ± 1 50 ± 1 80 ± 1 in mm Allowable Range of Peak Temperature Size T (°C) t (second) t 1 (second) Ø 4 ~ 6,3 Ø 8 x 10,5 Ø 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. v2006.2 8 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com Part Number System Technical Specification Snap-In Type Pin Type: Snap-In Order Code: T6, T4 T6, T4 Pin Type: Soldering Order Code: S4 S4 Terminal Pin Length T T6 6,3 T 4,0 Snap-In Terminal Order Code: P2, P3, P4 P2 P3 Negative Terminal Soldering Terminal Order Code: P5 P4 Positive P5 Negative Negative Mounting Holes P3 only T4 Terminal Mounting Holes Mounting Holes Order Code Screw Type EC Technology G Terminal Type 1C BP 101 Capacitance Code M Capacitance Tolerance ±20% = M Bolt B Mounting =B =N E Diameter 160 Length 53 = 053 65 = 065 96 = 096 A61 For Terminal Code see tables below JExxxxx for Specials only Rated Voltage Series Code Code CD 1 = BP 100 = 101 EC = Electrolytic Screw = G For coding Capacitor please refer CD 16 = PK 1 000 = 102 to the pages CD 17 = PX 10 000 = 103 of ratings CD 18 = PC CD 19 = BL 36 = A 40 = B 51 = C ±10% = K No double sleeve +30 / -10% = Q 2 stoppers bracket+double sleeve* = I +20 / -0% = R 3 stoppers bracket+double sleeve* = Y +50 / -10% = T No bracket, but double sleeve* preferred =D * Double sleeve for diameter ≥ 51 only 64 = D 100 = 100 77 = E 115 = 115 90 = F 236 = 236 101 = G Technical Specification Screw Type Dimensions Standard Housing Order Code: I, Y, D, N Bolt Housing Order Code: B ØD Ø 36 ≥ Ø 51 Ød M8 M12 l 12 16 in mm 10 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2