AD-BCX56-16

www.jscj-elec.com AD-BCX54/55/56 series JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. AD-BCX54/55/56 series Plastic-Encapsulated Transistor AD-BCX54/55/56 series Transistor (NPN) FEATURES ⚫ High collector current ⚫ Low collector-emitter saturation voltage ⚫ Complementary types: AD-BCX51/52/53 series (PNP) ⚫ AEC-Q101 qualified Version 1.0 1 / 6 2021-07-01 www.jscj-elec.com AD-BCX54/55/56 series MAXIMUM RATINGS (Tj = 25°C unless otherwise specified) Parameter Symbol AD-BCX54* AD-BCX55* AD-BCX56* Unit Collector-base voltage VCBO 45 60 100 V Collector-emitter voltage VCEO 45 60 80 V Emitter-base voltage VEBO 5 V Collector continuous current IC 1) 1 A Peak pulsed collector current ICM 2 A Base continuous current IB 100 mA Peak pulsed base current (tp < 1ms) IBM 200 mA 500 mW 250 °C/W -55 ~ 150 °C Collector power dissipation PC 1) Thermal resistance from junction to ambient RθJA Operating junction and storage temperature range Tj, Tstg 2) ELECTRICAL CHARACTERISTICS (Tj = 25°C unless otherwise specified) Parameter Symbol Test condition Min Typ Max 45 - - 60 - - AD-BCX56* 100 - - AD-BCX54* 45 - - 60 - - 80 - - AD-BCX54* Collector-base breakdown voltage Collector-emitter breakdown voltage AD-BCX55* AD-BCX55* V(BR)CBO V(BR)CEO 3) IC = 0.1mA, IE = 0A IC = 10mA, IB = 0A AD-BCX56* Base-emitter breakdown voltage Unit V V V(BR)EBO IE = 10µA, IC = 0A 5 - - V Collector-base cut-off current ICBO VCB = 30V, IE = 0A - - 100 nA Emitter-base cut-off current IEBO VEB = 5V, IC = 0A - - 100 nA DC current gain Collector-emitter saturation voltage hFE(1) 3) VCE = 2V, IC = 5mA 40 - - hFE(2) 3) VCE = 2V, IC = 150mA 63 - 250 hFE(3) 3) VCE = 2V, IC = 500mA 25 - - - VCE(sat) 3) IC = 500mA, IB = 50mA - - 0.5 V Base-emitter voltage VBE 3) IC = 500mA, VCE = 2V - - 1 V Transition frequency fT VCE = 5V, IC = 10mA, f = 100MHz - 130 - MHz CLASSIFICATION OF hFE(2) RANK RANGE MARKING AD-BCX54-10, AD-BCX55-10, ADBCX56-10 63 ~ 160 BC, BG, BK AD-BCX54-16, AD-BCX55-16, ADBCX56-16 100 ~ 250 BD, BM, BL 1) Maximum allowed temperature Tj = 25°C. 2) Measured with the device mounted on 1 inch2 FR-4 board with 1oz. copper, in a still air environment with Ta = 25℃. 3) Pulse test. Version 1.0 2 / 6 2021-07-01 www.jscj-elec.com AD-BCX54/55/56 series TYPICAL CHARACTERISTICS Version 1.0 3 / 6 2021-07-01 www.jscj-elec.com AD-BCX54/55/56 series SOT-89-3L PACKAGE OUTLINE DIMENSIONS SOT-89-3L SUGGESTED PAD LAYOUT Note: 1. Controlling dimension in millimeters. 2. General tolerance: ±0.05mm. 3. The pad layout is for reference purpose only. Version 1.0 4 / 6 2021-07-01 www.jscj-elec.com AD-BCX54/55/56 series SOT-89-3L TAPE AND REEL Version 1.0 5 / 6 2021-07-01 www.jscj-elec.com AD-BCX54/55/56 series PUBLISHED BY JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 13th Floor, C Block, Tengfei Building, Yan Chuang Yuan, Nanjing Jiangbei New Area, China LEGAL DISCLAIMER The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples, hints or typical values stated herein and/or any information regarding the application of the device, JSCJ hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of JSCJ in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. INFORMATION For further information on technology, delivery terms and conditions as well as prices, please contact your nearest JSCJ office (www.jscj-elec.com). WARNINGS Due to technical requirements, products may contain dangerous substances. For information on the types in question, please contact your nearest JSCJ office. Except as otherwise explicitly approved by JSCJ in a written document signed by authorized representatives of JSCJ, JSCJ’s products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. Version 1.0 6 / 6 2021-07-01