AD-CZT5551

www.jscj-elec.com AD-CZT5551 JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. AD-CZT5551 Plastic-Encapsulated Transistor AD-CZT5551 Transistor (NPN) FEATURES ⚫ High voltage amplifier application ⚫ AEC-Q101 qualified MARKING Version 1.0 1 / 6 2021-07-01 www.jscj-elec.com AD-CZT5551 MAXIMUM RATINGS (Tj = 25°C unless otherwise specified) Parameter Symbol Value Unit Collector-base voltage VCBO 180 V Collector-emitter voltage VCEO 160 V Emitter-base voltage VEBO Collector continuous current 6 V IC 1) 600 mA Collector power dissipation PC 1) 1 W Thermal resistance from junction to ambient RθJA 125 °C/W Tj, Tstg -55 ~ 150 °C Operating junction and storage temperature range ELECTRICAL CHARACTERISTICS (Tj = 25°C unless otherwise specified) Parameter Symbol Test condition Min Typ Max Unit Collector-base breakdown voltage V(BR)CBO IC = 0.1mA, IE = 0A 180 - - V Collector-emitter breakdown voltage V(BR)CEO IC = 1mA, IB = 0A 160 - - V Base-emitter breakdown voltage V(BR)EBO IE = 10µA, IC = 0A 6 - - V Collector-base cut-off current ICBO VCB = 120V, IE = 0A - - 50 nA Emitter-base cut-off current IEBO VCB = 4V, IE = 0A - - 50 nA hFE(1) VCE = 5V, IC = 1mA 80 - - hFE(2) VCE = 5V, IC = 10mA 100 - 300 hFE(3) VCE = 5V, IC = 50mA 30 - - VCE(sat)(1) IC = 10mA, IB = 1mA - - 0.15 V VCE(sat)(2) IC = 50mA, IB = 5mA - - 0.2 V VBE(sat)(1) IC = 10mA, IB = 1mA - - 1 V VBE(sat)(2) IC = 50mA, IB = 5mA - - 1 V 100 - 300 MHz DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency fT VCE = 10V, IC = 10mA, f = 100MHz - Collector output capacitance Cob VCE = 10V, IE = 0A, f = 1MHz - - 6 pF Emitter input capacitance Cib VBE = 0.5V, IC = 0A, f = 1MHz - - 20 pF 1) Maximum allowed temperature Tj = 25°C. 2) Measured with the device mounted on 1 inch2 FR-4 board with 1oz. copper, in a still air environment with Ta = 25℃. Version 1.0 2 / 6 2021-07-01 www.jscj-elec.com AD-CZT5551 TYPICAL CHARACTERISTICS Version 1.0 3 / 6 2021-07-01 www.jscj-elec.com AD-CZT5551 SOT-223 PACKAGE OUTLINE DIMENSIONS SOT-223 SUGGESTED PAD LAYOUT Note: 1. Controlling dimension in millimeters. 2. General tolerance: ±0.05mm. 3. The pad layout is for reference purpose only. Version 1.0 4 / 6 2021-07-01 www.jscj-elec.com AD-CZT5551 SOT-223 TAPE AND REEL Version 1.0 5 / 6 2021-07-01 www.jscj-elec.com AD-CZT5551 PUBLISHED BY JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 13th Floor, C Block, Tengfei Building, Yan Chuang Yuan, Nanjing Jiangbei New Area, China LEGAL DISCLAIMER The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples, hints or typical values stated herein and/or any information regarding the application of the device, JSCJ hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of JSCJ in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. INFORMATION For further information on technology, delivery terms and conditions as well as prices, please contact your nearest JSCJ office (www.jscj-elec.com). WARNINGS Due to technical requirements, products may contain dangerous substances. For information on the types in question, please contact your nearest JSCJ office. Except as otherwise explicitly approved by JSCJ in a written document signed by authorized representatives of JSCJ, JSCJ’s products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. Version 1.0 6 / 6 2021-07-01