BAP64-05

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SOT-23 Plastic-Encapsulate Diodes BAP64-04,05,06 Pin Diode SOT-23 FEATURES  High voltage ,current controlled  RF resistor for RF attenuators and switches  Low diode capacitance  Low diode forward resistance  Low series inductance  For applications up to 3 GHz BAP64-04 BAP64-05 BAP64-04 BAP64-06 BAP64-05 BAP64-06 Solid dot = Green molding compound device,if none, the normal device. Maximum Ratings (Ta=25℃ unless otherwise specified) Symbol Value Unit Continuous reverse voltage VR 175 V Continuous forward current IF 100 mA Power dissipation PD 250 mW RθJA 500 ℃/W TJ,Tstg -55 ~ +150 ℃ Parameter Thermal resistance from junction to ambient Operation Junction and Storage Temperature Range www.jscj-elec.com 1 Rev. - 2.0 MOSFET ELECTRICAL CHARACTERISTICS Ta =25 ℃ unless otherwise specified Parameter Forward Voltage Symbol Min Typ Max Unit VF 1.1 V IR1 10 IR2 1 Reverse Current Cd1 Diode Capacitance Diode Forward Resistance (note 1) μA Conditions IF= 50mA VR1= 175V VR2=20V VR=0V, f=1MHz 0.52 Cd2 0.5 Cd3 0.35 Rd1 40 Rd2 20 Rd3 3.8 Rd4 1.35 pF VR=1V,f=1MHz VR=20V,f=1MHz IF=0.5mA, f=100MHz Ω IF=1mA, f=100MHz IF=10mA, f=100MHz IF=100mA, f=100MHz Charge Carrier Life Time τL 1.55 μs When switched from IF =10mA to IR=6mA;RL=100Ω;measured at IR =3mA Series Inductance LS 1.4 nH IF=10mA, f=100MHz Note: 1.Guaranteed on AQL basis: inspection level S4,AQL 1.0. www.jscj-elec.com 2 Rev. - 2.0 Typical Characteristics Forward Characteristics 100 1 0.1 0.2 0.4 0.6 0.8 FORWARD VOLTAGE 1.0 VF Ta=25℃ 1 0 35 (V) 70 105 REVERSE VOLTAGE 140 VR 175 (V) Power Derating Curve Capacitance Characteristics Per Diode 0.5 10 0.1 1.2 Characteristics Ta=100℃ (nA) T= a 2 5℃ REVERSE CURRENT IR 10 T= a 1 00 ℃ IF FORWARD CURRENT Reverse 1000 (mA) 100 300 Ta=25℃ f=1MHz 250 PD 0.3 POWER DISSIPATION JUNCTION CAPACITANCE CJ (pF) (W) 0.4 0.2 0.1 0.0 200 150 100 50 0 2 4 6 8 10 12 REVERSE VOLTAGE www.jscj-elec.com 14 VR 16 18 0 20 (V) 0 25 50 75 AMBIENT TEMPERATURE 3 100 Ta 125 150 (℃ ) Rev. - 2.0 SOT-23 Package Outline Dimensions Symbol A A1 A2 b c D E E1 e e1 L L1 θ Dimensions In Millimeters Min Max 0.900 1.150 0.000 0.100 0.900 1.050 0.300 0.500 0.080 0.150 2.800 3.000 1.200 1.400 2.250 2.550 0.950 TYP 1.800 2.000 0.550 REF 0.300 0.500 0° 8° Dimensions In Inches Min Max 0.035 0.045 0.000 0.004 0.035 0.041 0.012 0.020 0.003 0.006 0.110 0.118 0.047 0.055 0.089 0.100 0.037 TYP 0.071 0.079 0.022 REF 0.012 0.020 0° 8° SOT-23 Suggested Pad Layout NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein. JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 4 Rev. - 2.0 SOT-23 Tape and Reel www.jscj-elec.com 5 Rev. - 2.0