CJSMBJ54A

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SMBG Plastic-Encapsulate Diodes CJSMBJ SERIES Transient Voltage Suppressor Diodes Features ● PPP ● VRWM SMBG 600W 10V- 100V ● Glass passivated chip Applications ● Clamping Voltage Bi-directional Uni-directional Symbol Unit Conditions Max Peak pulse power dissipation PPPM W with a 10/1000us waveform 600 Peak pulse current(note 1) IPPM A with a 10/1000us waveform See Next Table PD W On infinite heat sink at TL=50℃ 5.0 Peak forward surge current IFSM A 8.3 ms single half sine-wave uni-directional only (note 2) 100 Operating junction and storage temperature range TJ,TSTG ℃ Item Power dissipation -55 to +150 Electrical Characteristics（Ta=25℃ Unless otherwise specified） Item Symbol Unit Maximum instantaneous forward Voltage VF V at 50A for uni-directional only 3.5 RθJL ℃/W junction to lead TL=50℃ 20 RθJA ℃/W junction to ambient TA=25℃ 100 Conditions Max Thermal resistance Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA= 25℃per Fig.2 (2) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minutes maximum www.jscj-elec.com 1 Rev. - 1.0 Electrical Characteristics (TA=25℃ unless otherwise noted) Part Number UNI BI CJSMBJ10A CJSMBJ10CA CJSMBJ11A CJSMBJ11CA CJSMBJ12A CJSMBJ12CA CJSMBJ13A CJSMBJ13CA CJSMBJ14A CJSMBJ14CA CJSMBJ15A CJSMBJ15CA CJSMBJ16A CJSMBJ16CA CJSMBJ17A CJSMBJ17CA CJSMBJ18A CJSMBJ18CA CJSMBJ20A CJSMBJ20CA CJSMBJ22A CJSMBJ22CA CJSMBJ24A CJSMBJ24CA CJSMBJ26A CJSMBJ26CA CJSMBJ28A CJSMBJ28CA CJSMBJ30A CJSMBJ30CA CJSMBJ33A CJSMBJ33CA CJSMBJ36A CJSMBJ36CA CJSMBJ40A CJSMBJ40CA CJSMBJ43A CJSMBJ43CA CJSMBJ45A CJSMBJ45CA CJSMBJ48A CJSMBJ48CA CJSMBJ51A CJSMBJ51CA CJSMBJ54A CJSMBJ54CA CJSMBJ58A CJSMBJ58CA CJSMBJ60A CJSMBJ60CA CJSMBJ64A CJSMBJ64CA CJSMBJ70A CJSMBJ70CA CJSMBJ75A CJSMBJ75CA CJSMBJ78A CJSMBJ78CA CJSMBJ85A CJSMBJ85CA CJSMBJ90A CJSMBJ90CA CJSMBJ100A CJSMBJ100CA Breakdown Voltage VBR@IT Device Marking Code UNI BI B10A XX(2) B11A XX B12A XX B10CA XX B11CA XX B12CA XX B13A XX B14A XX B15A XX B13CA XX B14CA XX B15CA XX B16A XX B17A XX B18A XX B16CA XX B17CA XX B18CA XX B20A XX B22A XX B20CA XX B22CA XX B24A XX B26A XX B24CA XX B26CA XX B28A XX B28CA XX B30A XX B33A XX B30CA XX B33CA XX B36A XX B36CA XX B40A XX B43A XX B40CA XX B43CA XX B45A XX B45CA XX B48A XX B51A XX B48CA XX B51CA XX B54A XX B54CA XX B58A XX B60A XX B64A XX B70A XX B75A XX B78A XX B85A XX B90A XX B100A XX B58CA XX B60CA XX B64CA XX B70CA XX B75CA XX B78CA XX B85CA XX B90CA XX B100CA XX Test Current Max Reverse Leakage @VRWM IR(uA) Reverse Standoff Voltage Max Peak Pulse Current(1) Max Clamping Voltage @Ipp Min.(V) Max.(V) IT(mA) UNI BI VRWM(V) ( IPP(A) Vc(V) 11.14 12.29 1 5 5 10 35.3 16.8 12.25 13.49 1 5 5 11 33 18 13.35 14.69 1 5 5 12 30.2 19.7 14.46 15.89 1 5 5 13 28 21.3 15.66 17.19 1 5 5 14 25.9 23 16.77 18.49 1 5 5 15 24.6 24.2 17.87 19.69 1 5 5 16 23.1 25.7 18.98 20.89 1 5 5 17 21.8 27.3 20.08 22.08 1 5 5 18 20.6 28.9 22.29 24.48 1 5 5 20 18.6 32.1 24.5 26.88 1 5 5 22 16.9 35.1 26.81 29.48 1 5 5 24 15.5 38.5 29.02 31.88 1 5 5 26 14.3 41.7 31.22 34.38 1 5 5 28 13.3 44.9 33.43 36.77 1 5 5 30 12.4 47.9 36.85 40.57 1 5 5 33 11.3 52.8 40.16 44.17 1 5 5 36 10.4 57.5 44.58 49.07 1 5 5 40 9.3 63.9 47.99 52.76 1 5 5 43 8.7 68.7 50.2 55.26 1 5 5 45 8.3 72 53.51 58.86 1 5 5 48 7.8 76.6 56.93 62.66 1 5 5 51 7.3 81.6 60.24 66.25 1 5 5 54 6.9 86.2 64.66 71.15 1 5 5 58 6.5 92.7 66.97 73.65 1 5 5 60 6.2 95.8 71.39 78.54 1 5 5 64 5.9 102 78.11 85.94 1 5 5 70 5.3 111.9 83.63 92.04 1 5 5 75 5 119.8 87.05 95.73 1 5 5 78 4.8 124.7 94.78 103.93 1 5 5 85 4.4 135.6 100.4 110.92 1 5 5 90 4.1 144.5 111.45 122.91 1 5 5 100 3.7 160.4 Notes: (1) Waveform of CJSMBJ10A -CJSMBJ100CA are defined as per fig.3 (2) XX=Code www.jscj-elec.com 2 Rev. - 1.0 Typical Characteristics Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Derating Curve 120 100 Derating in Percentage % Peak Pulse Power (PPP) or Current (IPP) PPP - Peak Pulse Power(kW) 100 10 1 80 TJMAX=150 ℃ 60 40 20 0.1 1 10 100 0 1000 0 25 50 tP-Pulse Duration (μs) Figure 3. Pulse Waveform TJ=25℃ Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Pulse Current, %IRSM tr=10μS 125 150 1000 Half Value IPPM(IPPM/2) 50 Bi-directional V=0V 100 10/1000μs Waveform as defined by R.E.A 0 0 1 2 3 Time (ms) TJ=25℃ 10 4 f=1MHz 0V Bias 10 20 40 60 80 100 VBR-Reverse Breakdown Voltage (V) Figure 5. Steady State Power Dissipation Derating Curve 120 175 Uni-directional V=0V Peak Value IPPM 100 100 Figure 4. Typical Junction Capacitance 10000 JUNCTIO UNCTION N CAPACITANCE CJ (p (pF) F) 150 75 TA-Ambient Temperature (℃) Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 120 initial TJmax = 25℃ 80 60 TJMAX=150 ℃ 40 20 0 8.3 ms Single Half Sine-Wave 100 Peak Forward Surve Current (A) in Percentage % PM(AV), Steady State Power Dissipation 100 80 60 40 20 0 25 50 75 100 125 150 0 175 TL-Lead Temperature (℃) www.jscj-elec.com 1 5 10 50 100 Number of Cycles at 60Hz 3 Rev. - 1.0 SMBG Cathode Band (for uni-directional products only) 0.155(3.94) 0.130(3.30) 0.087 (2.20) 0.071 (1.80) 0.180(4.57) 0.160(4.06) 0.012(0.305) 0.006(0.152) 0.096(2.44) 0.084(2.13) 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.220(5.59) 0.205(5.21) Dimensions in inches and (millimeters) SMBG 4.26 1.8 NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein.JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 4 Rev. - 1.0 Reel Taping Specifications For Surface Mount Devices- SMBG FIG:CONFIGURATION OF SURFACE MOUNTED DEVICES TAPING SMBG 75 1.0 2.95 0.039 www.jscj-elec.com 5 Rev. - 1.0