CJSMCJ18CA

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SMCG Plastic-Encapsulate Diodes CJSMCJ SERIES Transient Voltage Suppressor Diodes Features ● PPP SMCG 1500W ● VRWM 10V- 100V ● Glass passivated chip Applications ● Clamping Voltage Bi-directional Uni-directional Symbol Unit Conditions Max Peak pulse power dissipation PPPM W with a 10/1000us waveform 1500 Peak pulse current(note1) IPPM A with a 10/1000us waveform Power dissipation PD W Peak forward surge current IFSM A Operating junction and storage temperature range TJ,TSTG ℃ Item On infinite heat sink at TL=50℃ 8.3 ms single half sine-wave uni-directional only (note 2) See Next Table 6.5 200 -55 to +150 Electrical Characteristics（Ta=25℃ Unless otherwise specified） Item Symbol Unit Maximum instantaneous forward Voltage VF V Conditions Max at 100A for uni-directional only 3.5 RθJL ℃/W junction to lead TL=50℃ 15 RθJA ℃/W junction to ambient TA=25℃ 75 Thermal resistance Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA= 25℃per Fig.2 (2) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minutes maximum www.jscj-elec.com 1 Rev. - 1.0 Electrical Characteristics (TA=25℃ unless otherwise noted) Part Number UNI BI CJSMCJ10A CJSMCJ10CA CJSMCJ11A CJSMCJ11CA CJSMCJ12A CJSMCJ12CA CJSMCJ13A CJSMCJ13CA CJSMCJ14A CJSMCJ14CA CJSMCJ15A CJSMCJ15CA CJSMCJ16A CJSMCJ16CA CJSMCJ17A CJSMCJ17CA CJSMCJ18A CJSMCJ18CA CJSMCJ20A CJSMCJ20CA CJSMCJ22A CJSMCJ22CA CJSMCJ24A CJSMCJ24CA CJSMCJ26A CJSMCJ26CA CJSMCJ28A CJSMCJ28CA CJSMCJ30A CJSMCJ30CA CJSMCJ33A CJSMCJ33CA CJSMCJ36A CJSMCJ36CA CJSMCJ40A CJSMCJ40CA CJSMCJ43A CJSMCJ43CA CJSMCJ45A CJSMCJ45CA CJSMCJ48A CJSMCJ48CA CJSMCJ51A CJSMCJ51CA CJSMCJ54A CJSMCJ54CA CJSMCJ58A CJSMCJ58CA CJSMCJ60A CJSMCJ60CA CJSMCJ64A CJSMCJ64CA CJSMCJ70A CJSMCJ70CA CJSMCJ75A CJSMCJ75CA CJSMCJ78A CJSMCJ78CA CJSMCJ85A CJSMCJ85CA CJSMCJ90A CJSMCJ90CA CJSMCJ100A CJSMCJ100CA Notes: Device Marking Code UNI BI C10A XX(2) C11A XX C12A XX C13A XX C14A XX C15A XX C16A XX C17A XX C18A XX C20A XX C22A XX C24A XX C26A XX C28A XX C30A XX C33A XX C36A XX C40A XX C43A XX C45A XX C48A XX C51A XX C54A XX C58A XX C60A XX C64A XX C70A XX C75A XX C78A XX C85A XX C90A XX C100A XX C10CA XX C11CA XX C12CA XX C13CA XX C14CA XX C15CA XX C16CA XX C17CA XX C18CA XX C20CA XX C22CA XX C24CA XX C26CA XX C28CA XX C30CA XX C33CA XX C36CA XX C40CA XX C43CA XX C45CA XX C48CA XX C51CA XX C54CA XX C58CA XX C60CA XX C64CA XX C70CA XX C75CA XX C78CA XX C85CA XX C90CA XX C100CA XX Breakdown Voltage VBR@IT Test Current Min.(V) Max.(V) IT(mA) Max Reverse Leakage @VRWM Reverse Standoff Voltage Max Peak Pulse Current Max Clamping Voltage @Ipp IR(uA) VRWM(V) ( IPP(A) Vc(V) 11.14 12.29 1 5 10 88.3 16.8 12.25 13.49 1 5 11 82.5 18 13.35 14.69 1 5 12 75.4 19.7 14.46 15.89 1 5 13 69.8 21.3 15.66 17.19 1 5 14 64.7 23 16.77 18.49 1 5 15 61.5 24.2 17.87 19.69 1 5 16 57.7 25.7 18.98 20.89 1 5 17 54.4 27.3 20.08 22.08 1 5 18 51.4 28.9 22.29 24.48 1 5 20 46.3 32.1 24.5 26.88 1 5 22 42.3 35.1 26.81 29.48 1 5 24 38.6 38.5 29.02 31.88 1 5 26 35.7 41.7 31.22 34.38 1 5 28 33.1 44.9 33.43 36.77 1 5 30 31 47.9 36.85 40.57 1 5 33 28.2 52.8 40.16 44.17 1 5 36 25.9 57.5 44.58 49.07 1 5 40 23.3 63.9 47.99 52.76 1 5 43 21.7 68.7 50.2 55.26 1 5 45 20.6 72 53.51 58.86 1 5 48 19.4 76.6 56.93 62.66 1 5 51 18.2 81.6 60.24 66.25 1 5 54 17.3 86.2 64.66 71.15 1 5 58 16.1 92.7 66.97 73.65 1 5 60 15.5 95.8 71.39 78.54 1 5 64 14.6 102 78.11 85.94 1 5 70 13.3 111.9 83.63 92.04 1 5 75 12.4 119.8 87.05 95.73 1 5 78 11.9 124.7 94.78 103.93 1 5 85 11 135.6 100.4 110.92 1 5 90 10.3 144.5 111.45 122.91 1 5 100 9.3 160.4 (1) Waveform of CJSMCJ10A -CJSMCJ100CA are defined as per fig.3 (2) XX=Code www.jscj-elec.com 2 Rev. - 1.0 Typical Characteristics Figure 1. Peak Pulse Power Rating Curve 100 Derating in Percentage % 10 1 0.1 1 10 100 Figure 2. Pulse Derating Curve 125 Peak Pulse Power (PPP) or Current (IPP) PPP - Peak Pulse Power(kW) 100 75 TJMAX=150 ℃ 50 25 0 1000 0 25 50 tP-Pulse Duration (μs) Figure 3. Pulse Waveform 150 75 100 150 175 Figure 4. Typical Junction Capacitance 100000 TJ=25℃ Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM tr=10μS JUNCTIO UNCTION N CAPACITANCE CJ (p (pF) F) 10000 Peak Pulse Current, %IRSM 125 TA-Ambient Temperature (℃) Peak Value IPPM 100 Uni-directional V=0V 1000 Half Value IPPM(IPPM/2) 50 10/1000μs Waveform as defined by R.E.A Bi-directional V=0V 100 TJ=25℃ f=1MHz Vsig=50mVp-p 0 0 1 2 3 Time (ms) 10 4 20 40 60 80 100 VBR-Reverse Breakdown Voltage (V) Figure 5. Steady State Power Dissipation Derating Curve 125 10 Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 200 initial TJmax = 25℃ 100 160 Peak Forward Surve Current (A) in Percentage % PM(AV), Steady State Power Dissipation 8.3 ms Single Half Sine-Wave 75 TJMAX=150 ℃ 50 25 0 120 80 40 0 25 50 75 100 125 150 0 175 TL-Lead Temperature (℃) www.jscj-elec.com 1 5 10 50 100 Number of Cycles at 60Hz 3 Rev. - 1.0 SMCG Package Outline Dimensions Cathode Band (for uni-directional products only) 0.108 (2.75) 0.217(5.50) 0.123 (3.25) 0.240(6.10) 0.256(6.50) 0.280(7.10) 0.007(0.17) 0.012(0.30) 0.087(2.2) 0.106(2.7) 0.035(0.90) 0.008(0.203)MAX. 0.055(1.40) 0.291(7.40) 0.331(8.40) SMCG Suggested Pad Layout 3.5 6.5 1.8 NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein.JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 4 Rev. - 1.0 Reel Taping Specifications For Surface Mount Devices- SMCG FIG:CONFIGURATION OF SURFACE MOUNTED DEVICES TAPING SMCG 75 1.0 2.95 0.039 www.jscj-elec.com 5 Rev. - 1.0