ESDU5V0C2

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SOT-23 Plastic-Encapsulate Diodes ESDU5V0C2 Uni-direction ESD Protection Diode DESCRIPTION SOT-23 Designed to protect voltage sensitive electronic components from ESD and other transients. Excellent clamping capability, low leakage, low capacitance, and fast response time provide best in class protection on designs that are exposed to ESD. The combination of small size, low capacitance, and high level of ESD protection makes them a flexible solution for applications such as HDMI, Display Port TM, and MDDI interfaces. It is designed to replace multiplayer varistors (MLV) in consumer equipments applications such as mobile phone, notebook, PAD, STB, LCD TV etc. FEATURES z Uni-directional ESD protection of two lines z Excellent package:2.9mm×1.3mm×1.0mm z Low capacitance: 0.8pF(max.) z Fast response time z Low reverse stand−off voltage: 5V z JESD22-A114-B ESD Rating of class 3B per human z Low reverse clamping voltage z Low leakage current body model z IEC 61000-4-2 Level 4 ESD protection APPLICATIONS z Computers and peripherals z STB z High speed data lines z LCD TV z Mobile phone z Digital Camera z High Definition Multi-Media Interface (HDMI) z Other electronics equipments Communi- z Digital Visual Interface (DVI) z PAD cation systems MARKING U5C2 = Device code Solid dot = Green molding compound device, if none, the normal device Front side www.jscj-elec.com 1 Rev. - 2.0 ESDU5V0C2 CHANGJING ELEC.TECH. MAXIMUM RATINGS ( Ta=25℃ unless otherwise noted ) Parameter Symbol Air Model IEC 61000-4-2 ESD Voltage Contact Model JESD22-A114-B ESD Voltage Per Human Body Model ESD Voltage VESD(1) Operation Junction and Storage Temperature Range kV ±16 ±0.4 87.5 W (2) 3.5 A TL 260 ℃ TJ,Tstg -55 ~ +150 ℃ IPP Lead Solder Temperature − Maximum (10 Second Duration) ±15 (2) PPP Peak Pulse Current Unit ±15 Machine Model Peak Pulse Power Limit (1).Device stressed with ten non-repetitive ESD pulses, Per channel (I/O to GND). (2).Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC61000-4-5. ESD standards compliance IEC61000-4-2 Standard JESD22-A114-B Standard Contact Discharge Air Discharge ESD Class Human Body Discharge V Level Test Voltage kV Level Test Voltage kV 0 0～249 1 2 1 2 2 4 2 4 1A 1B 1C 250～499 500～999 1000～1999 3 6 3 8 4 8 4 15 2 3A 3B 2000～3999 4000～7999 8000～15999 ESD pulse waveform according to IEC61000-4-2 www.jscj-elec.com 8/20μs pulse waveform according to IEC 61000-4-5 2 Rev. - 2.0 CHANGJING ELEC.TECH. ESDU5V0C2 ELECTRICAL PARAMETER Symbol Parameter VC Clamping Voltage @ IPP IPP Peak Pulse Current VBR Breakdown Voltage @ IT IT Test Current IR Reverse Leakage Current @ VRWM VRWM Reverse Standoff Voltage VF Forward Voltage@ IF IF Forward Current V-I characteristics for a uni-directional TVS ELECTRICAL CHARACTERISTICS(Ta=25℃ unless otherwise specified) Parameter Symbol Test conditions Min Typ Max Unit 5 V 1 μA Per channel(I/O to GND unless otherwise specified) Reverse stand off voltage VRWM（1） Reverse leakage current = VRWM 5V IR V(BR) Breakdown voltage = IT 1mA 6 = IPP 1A （2） VC Clamping voltage = IPP 3.5A Forward voltage = IF 10mA VF Junction capacitance = = VR 0V,f 1MHz CJ VR= 0V,f= 1MHz, 0.4 I/O to I/O V 15 V 25 V 1.4 V 0.8 pF 0.4 pF (1).Other voltages available upon request. (2).Non-repetitive current pulse 8/20μs exponential decay waveform according to IEC61000-4-5 www.jscj-elec.com 3 Rev. - 2.0 CHANGJING ELEC.TECH. ESDU5V0C2 TYPICAL CHARACTERISTICS Forward Characteristics Reverse 100 100 Pulsed I/O Pin to Ground Pulsed I/O Pin to Ground 80 (mA) (mA) 10 REVERSE CURRENT IR IF FORWARD CURRENT Characteristics Ta=100℃ Ta=25℃ 1 Ta=100℃ 60 Ta=25℃ 40 20 0.1 0.2 0.4 0.6 0.8 FORWARD VOLTAGE VC —— 30 1.0 VF 0 1.2 0 2 4 6 REVERSE VOLTAGE (V) IPP 8 VR 10 Capacitance Characteristics 1.0 Ta=25℃ Ta=25℃ tp=8/20us f=1MHz 0.8 JUNCTION CAPACITANCE CJ (pF) CLAMPING VOLTAGE VC (V) 24 I/O Pin to Ground 18 12 6 0 1.0 12 (V) I/O Pin to Ground 0.6 0.4 I/O Pin to I/O Pin 0.2 1.5 2.0 2.5 3.0 0.0 3.5 REVERSE PEAK PULSE CURRENT IPP (A) www.jscj-elec.com 0 1 2 REVERSE VOLTAGE 4 3 4 VR 5 (V) Rev. - 2.0 ESDU5V0C2 CHANGJING ELEC.TECH. PACKAGE OUTLINE AND PAD LAYOUT INFORMATION SOT-23 Package Outline Dimensions Dimensions In Millimeters Min Max 0.900 1.150 0.000 0.100 0.900 1.050 0.300 0.500 0.080 0.150 2.800 3.000 1.200 1.400 2.250 2.550 0.950 TYP 1.800 2.000 0.550 REF 0.300 0.500 0° 8° Symbol A A1 A2 b c D E E1 e e1 L L1 θ Dimensions In Inches Min Max 0.035 0.045 0.000 0.004 0.035 0.041 0.012 0.020 0.003 0.006 0.110 0.118 0.047 0.055 0.089 0.100 0.037 TYP 0.071 0.079 0.022 REF 0.012 0.020 0° 8° SOT-23 Suggested Pad Layout NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein. JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 5 Rev. - 2.0 ESDU5V0C2 CHANGJING ELEC.TECH. TAPE AND REEL INFORMATION www.jscj-elec.com 6 Rev. - 2.0