US1JL

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SOD-1 23FL Plastic-Encapsulate Diodes US1AL THRU US1ML High Efficient Rectifier Diodes SOD-1 23FL Features ●IF(AV) 1A ● VRRM 50V-1000V ●High surge current capability ● Polarity: Color band denotes cathode Applications ● Rectifier Marking ● US1AL-US1DL : USL ● US1GL : USM ● US1JL-US1ML : USH Limiting Values(Absolute Maximum Rating) US1 Item Symbol Unit Test Conditions AL BL DL GL JL KL ML Repetitive Peak Reverse Voltage VRRM V 50 100 200 400 600 800 1000 Maximum RMS Voltage V RMS V 35 70 140 280 420 560 700 Average Forward Current IF(AV) A 60Hz Half-sine wave， Resistance load，Ta=90℃ 1.0 Surge(Non-repetitive)Forward Current IFSM A 60Hz Half-sine wave， 1 cycle，Ta=25℃ 30 Operation Junction and Storage Temperature Range TJ,TSTG ℃ KL ML -55 ~ +150 Electrical Characteristics (T=25℃ Unless otherwise specified） US1 Symbol Unit Peak Forward Voltage VF V Maximum reverse recovery time trr ns Item Peak Reverse Current Thermal Resistance(Typical) IRRM1 IRRM2 RθJ-A RθJ-L μA ℃/ W Test Condition IF =1.0A BL DL 1.0 IF=0.5A,IR=1.0A,Irr=0.25A VRM=VRRM AL GL 1.3 50 JL 1.7 75 Ta =25℃ 5 Ta =125℃ 50 Between junction and ambient 70 Between junction and terminal 25 Notes: Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas www.jscj-elec.com 1 Rev. - 1.1 FIG.2: MAXIMUM NON-REPETITIVE FORWARD URGE CURRENT IFSM(A) IO(A) FIG.1: FORWARD CURRENT DERATING CURVE 1.0 35 30 0.8 8.3ms Single Half Sine Wave JEDEC Method 25 0.6 20 0.4 15 10 0.2 Resistive or Inductive Load P.C.B. Mounted on 0.2"×0.2" (5.0mm×5.0mm)Copper Pad Areas 5 0 0 25 75 50 100 125 150 Ta(℃ ) 0 1 2 10 100 20 Number of Cycles FIG.4 TYPICAL REVERSE CHARACTERISTICS 100 100 IR(uA) IF(A) FIG.3: TYPICAL FORWARD CHARACTERISTICS TJ=25℃ Pulse width=300us 1% Duty Cycle Tj=150℃ US1AL-DL 10 10 Tj=100℃ US1GL 1.0 1.0 US1JL-ML 0.1 0.1 0.2 Tj=25℃ 0.01 0.01 0.4 0.6 0.8 1.0 1.2 1.4 0 1.6 VF(V) 20 40 60 80 100 Voltage(%) FIG.5: Diagram of circuit and Testing wave form of reverse recovery time I D trr IF VR IF RL t 0 I RR IR www.jscj-elec.com 2 Rev. - 1.1 SOD-1 23FL 1.8± 0.1 １．０ ±0.15 Cathode Band Top View 1.3± 0.1 0.12-0.20 2.8 ±0.15 0.8±0.1 3.7 ±0.15 Dimensions in millimeters SOD-1 23FL 1.4 2.85 1.2 NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein.JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 3 Rev. - 1.1 Reel Taping Specifications For Surface Mount Devices-SOD-123FL FIG:CONFIGURATION OF SURFACE MOUNTED DEVICES TAPING SOD-123FL 54 1.0 2.13 0.039 www.jscj-elec.com 4 Rev. - 1.1