JEB05D3U

JIEJIE MICROELECTRONICS CO. , Ltd JEB05D3U Bi-directional TVS Diode for ESD Protection FEATURES:        Rev.2.0   2000 Watts peak pulse power per line (tP=8/20µs) Protects one bi-directional I/O line Low clamping voltage Working voltages: 5V Low leakage current RoHS compliant   SOD-323   MAIN APPLICATIONS       Cell phone handsets and accessories Microprocessor based equipment Personal digital assistants (PDA’s) Notebooks, desktops, and servers Portable instrumentation Pin Configuration PROTECTION SOLUTION TO MEET   IEC61000-4-2 (ESD) ±30kV (air),±30kV (contact)  IEC61000-4-4 (EFT) 40A (5/50ns)  IEC61000-4-5 (Lightning) 135A (8/20µs) MECHANICAL CHARACTERISTICS       SOD-323 package Molding compound flammability rating : UL 94V-0 Weight 5 milligrams (approximate) Quantity per reel : 3,000pcs Lead finish : lead free Marking code：D5 TEL：+86-513-83639777 - 1 / 6- http://www.jjwdz.com JEB05D3U for ESD Protection                               JieJie Microelectronics CO. , Ltd ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)  Parameter Symbol Value Unit PPP 2000 W VESD +/- 30 +/- 30 kV Lead soldering temperature TL 260 (10 sec.) ℃ Operating junction temperature range TJ -55 to +125 ℃ TSTG -55 to +150 ℃ Peak pulse power dissipation on 8/20μs waveform ESD per IEC 61000-4-2 (Air) ESD per IEC 61000-4-2 (Contact) Storage temperature range   ELECTRICAL CHARACTERISTICS (TA=25℃) Parameter Symbol Reverse working voltage Conditions Min Typ Max Unit 5.0 V 8.0 V VRWM Reverse breakdown voltage VBR IT=1mA 5.3 6.3 Reverse leakage current IR VRWM =5V 0.1 μA Peak pulse current IPP tP=8/20μs 135 A Clamping voltage VC IPP=135A, tP =8/20μs 12.5 16 V Junction capacitance CJ VRWM=0V, f=1MHz 400 450 pF   RATINGS AND V‐I CHARACTERISTICS CURVES (TA=25ºC, unless otherwise noted)  FIG.1:V- I curve characteristics (Bi-directional) I IPP IT VC VBR VRWM IR TEL：+86-513-83639777 FIG.2: Pulse waveform (8/20μs) Percent of I PPM Peak value 100 90 front time: T1 = 1.25×T = 8×(1±20%)μs time to half value: T2 = 20×(1±20%)μs Half value V IR VRWMVBR VC IT 50 IPP 10 0 0 - 2 / 6- T2 t(μs) T T1 10 20 30 40 http://www.jjwdz.com JEB05D3U for ESD Protection                               FIG.3: Pulse derating curve JieJie Microelectronics CO. , Ltd FIG.4: ESD clamping (30KV contact) PPP derating in percentage(%) 100 Percent of IPPM 100 90 80 30ns 60 40 60ns 20 0 0 25 50 TA(℃) 75 100 125 150 10 0 0 175 t(ns) tr 0.7 to 1ns 30 60   SOLDERING PARAMETERS  Reflow Condition -Temperature Min (Ts(min)) +150℃ -Temperature Max(Ts(max)) +200℃ Reflow condition tp TP -Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL)to peak) Ts(max) to TL - Ramp-up Rate Reflow   60-180 secs. 3℃/sec. Max 3℃/sec. Max -Temperature(TL)(Liquidus) +217℃ -Temperature(tL) 60-150 secs. TL +260(+0/-5)℃ Time within 5℃of actual Peak Temp (tp) 20-40secs. Ramp-down Rate 6℃/sec. Max Time 25℃ to Peak Temp (TP) 8 min. Max Do not exceed +260℃ tL TS(max) Ramp-down Preheat TS(min) 25 Peak Temp (Tp) Critical Zone TL to TP Ramp-up Temperature Pre Heat Pb-Free assembly (see figure at right) ts time to peak temperatue (t 25℃ to peak) Time                         TEL：+86-513-83639777 - 3 / 6- http://www.jjwdz.com JEB05D3U for ESD Protection                               JieJie Microelectronics CO. , Ltd PACKAGE MECHANICAL DATA  Millimeters Inches Symbol Min Typ Max Min Typ Max A 1.60 1.70 1.80 0.063 0.067 0.071 B 0.25 0.32 0.40 0.010 0.013 0.016 C 2.30 2.60 2.80 0.091 0.102 0.110 D 0.80 0.95 1.10 0.031 0.037 0.043 E 1.20 1.30 1.40 0.047 0.051 0.055 F 0.08 0.13 0.18 0.003 0.005 0.007 L 0.475REF 0.019REF L1 0.25 0.33 0.40 0.010 0.013 0.016 H 0.00 0.06 0.14 0.000 0.002 0.006 P 3.00 0.118 P1 0.80 0.031 Land Pattern TEL：+86-513-83639777 - 4 / 6- http://www.jjwdz.com JEB05D3U for ESD Protection                               JieJie Microelectronics CO. , Ltd TAPE AND REEL INFORMATION‐SOD‐323  Millimeters Inches Typ Typ A 1.46 0.057 B 2.90 0.114 C 1.25 0.049 d ⌀1.50 ⌀0.059 E 1.75 0.069 F 3.50 0.138 P0 4.00 0.157 P 4.00 0.157 P1 2.00 0.079 W 8.00 0.315 D ⌀178.0 ⌀7.008 D1 54.40 2.142 D2 13.00 0.512 G R78.0 R3.071 R25.60 R1.008 R6.50 R0.256 9.50 0.374 12.30 0.484 Symbol   Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 User direction of feed   Pin 1 quadrant:Q1&Q2 Packaging description: SOD-323 parts are shipped in tape. The carrier tape is made from a dissipative(carbon filled) polycarbonate resin. The cover tape is a multilayer film(heat activated adhesive in nature)primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. The reels are blue in color and made of recyclable plastic.     H   I     W1   W2   ORDERING INFORMATION  PART No. PACKAGE TYPE QUANTITY(PCS) REEL DESCIPTION JEB05D3U SOD-323 3,000 7 inch reel pack   TEL：+86-513-83639777 - 5 / 6- http://www.jjwdz.com JEB05D3U for ESD Protection                               JieJie Microelectronics CO. , Ltd MARKING CODE  Part Number Marking Code JEB05D3U D5   Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the second version which is made in 16-Nov.-2020. This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright ©2020 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL：+86-513-83639777 - 6 / 6- http://www.jjwdz.com