JSPG5100A

JIEJIE MICROELECTRONICS CO. , Ltd JSPG5100A 5A Schottky Barrier Rectifier Rev.1.2 DESCRIPTION  Plastic package has underwriters laboratories flammability classification 94V-0  For surface mounted applications in order to optimize board space  Lead free in compliance with EU RoHS 2011/65/EU directive  Ultra low forward voltage drop  Low power losses, high efficiency operation  High current capability and surge capability  Low thermal resistance package DO-214AA (SMB) MECHANICAL DATA Symbol  Case: SMB molded plastic  Terminals: Solder plated, solderable per J-STD-002  Polarity: Color band denotes cathode end ABSOLUTE MAXIMUM RATING(Rating at 25℃ ambient temperature unless otherwise specified.) Parameter Symbol JSPG5100A Unit Maximum repetitive peak reverse voltage VRRM 100 V Maximum RMS voltage VRMS 70 V Maximum DC blocking voltage VDC 100 V Maximum average forward current IF(AV) 5.0 A Peak forward surge current: 8.3ms single half sine-wave superimposed on rated load IFSM 120 A Tj -55 to +150 ℃ Tstg -55 to +150 ℃ Operating junction temperature range Storage temperature range   ELECTRICAL CHARACTERISTICS (Rating at 25℃ ambient temperature unless otherwise specified.) Parameter Symbol Forward voltage IF=5A Reverse current at rated DC blocking voltage TA=25℃ TA=100℃ Junction capacitance VR=4.0V, f=1MHz Min Typ VF Max Unit 0.85 V 0.1 mA IR 15 CJ 150 pF       TEL：+86-513-83639777 -1 / 4- http://www.jjwdz.com JSPG5100A THERMAL RESISTANCES Symbol Parameter Rth(j-a) JSPG5100A Unit 55 ℃/W Thermal resistance from junction to ambient (note1) Note1：Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length, P.C.B mounted   MARKING The first ‘*’  Date code The second ‘*’ The third ‘*’ The fourth ‘*’ ***** G 510 Batch code The fifth ‘*’   G  Package: SMB  5  IF(AV):5A  10 VRRM:100V   PACKAGE MECHANICAL DATA B Dimensions H F A C Ref. D K J L J G E Millimeters Min. Max. Min. Max. A 3.30 3.94 0.130 0.155 B 4.30 4.80 0.169 0.189 C 1.90 2.20 0.075 0.087 D 0.95 1.52 0.037 0.060 E 5.20 5.60 0.205 0.220 F 0.051 0.203 0.002 0.008 G 0.15 0.31 0.006 0.012 H 2.10 2.40 0.083 0.094 J 2.20 L 0.087 2.60 K DO-214AA (SMB) Inches 2.30 0.102 0.091         TEL：+86-513-83639777 -2 / 4- http://www.jjwdz.com JSPG5100A TAPE AND REEL SPECIFICATION-SMB Dimensions D0 P0 P2 Ref. B0 W F E Cathode A0 P1     Millimeters Inches A0 3.76 ± 0.3 0.148 ± 0.012 B0 5.69± 0.3 0.224 ± 0.012 C 330.0 13.0 D0 1.55 ± 0.1 0.061 ± 0.004 E 1.75 ± 0.2 0.069 ± 0.008 E1 13.3 ± 0.3 0.524± 0.012 F 5.5 ± 0.2 0.217 ± 0.008 P0 4.00 ± 0.2 0.157 ± 0.008 P1 8.00 ± 0.2 0.3145 ± 0.008 P2 2.00 ± 0.2 0.079 ± 0.008 W 12.0± 0.2 0.472 ± 0.008 W1 15.7 ± 2.0 0.618 ± 0.079 OUTLINE UNIT WEIGHT (g/PCS) typ. REEL (PCS) PER CARTON (PCS) REEL DIAMETERS (mm) TAPING 0.1 3,000 48,000 330   CHARACTERITICS CURVE  FIG.1: Typical forward characteristics (25℃) 10 FIG.2: Typical reverse characteristics Instantaneous forward current (A) Instantaneous reverse current ( mA) 10 TA=100℃ 1.0 1.0 0.1 0.1 TA=25℃ Forward voltage (V) 0.01 0 0.2 0.4 0.6 0.8 0.01 0 1.0 Percentage of peak reverse voltage (%) 20 40 60 80 100                       TEL：+86-513-83639777 -3 / 4- http://www.jjwdz.com JSPG5100A CHARACTERITICS CURVE  FIG.3: Maximum non-repetitive peak forward surge current 120 FIG.4: Forward current derating curve Peak forward surge current (A) Average forward current (A) 8.3ms Single Half Sine-Wave JEDEC METHOD 8.0 100 6.0 80 4.0 60 40 2.0 20 0 Number of cycles at 60Hz 1 10 100 Lead temperature (℃) 0 0 50 FIG.5: Maximum transient thermal impedance 100 Rth(j-a)(℃/W) 100 150 FIG.6: Typical junction capacitance 4000 Junction capacitance(pF) 1000 10 100 1.0 0.1 0.01 10 0.1 tp(s) 1 10 100 1 0.1 Reverse voltage(V) 1 10 100         Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the 1.2nd version which is made in 17-Dec.-2020. This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright ©2020 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL：+86-513-83639777 -4 / 4- http://www.jjwdz.com