JSPI140A

JIEJIE MICROELECTRONICS CO. , Ltd JSPI140A 1A Schottky Barrier Rectifier Rev.1.3 DESCRIPTION  Plastic package has underwriters laboratories flammability classification 94V-0  For surface mounted applications in order to optimize board space  Lead free in compliance with EU RoHS 2011/65/EU directive  Ultra low forward voltage drop  Low power losses, high efficiency operation  High current capability and surge capability  Low thermal resistance package   SOD-123FL MECHANICAL DATA Symbol  Case: SOD-123FL molded plastic  Terminals: Solder plated, solderable per J-STD-002  Polarity: Color band denotes cathode end ABSOLUTE MAXIMUM RATING (Rating at 25℃ ambient temperature unless otherwise specified.) Parameter Symbol JSPI140A Unit Maximum repetitive peak reverse voltage VRRM 40 V Maximum RMS voltage VRMS 28 V Maximum DC blocking voltage VDC 40 V Maximum average forward current IF(AV) 1.0 A Peak forward surge current: 8.3ms single half sine-wave superimposed on rated load IFSM 30 A Tj -55 to +125 ℃ Tstg -55 to +150 ℃ Operating junction temperature range Storage temperature range   ELECTRICAL CHARACTERISTICS (Rating at 25℃ ambient temperature unless otherwise specified.) Parameter Symbol Forward voltage IF=1A Reverse current at rated DC blocking voltage TA=25℃ Junction capacitance VR=4.0V, f=1MHz Min Typ VF Max Unit 0.55 V 0.5 mA IR TA=100℃ 6 CJ 110 pF       TEL：+86-513-83639777 -1 / 4- http://www.jjwdz.com JSPI140A THERMAL RESISTANCES Symbol Parameter Rth(j-a) JSPI140A Unit 88 ℃/W Thermal resistances from junction to ambient MARKING   14 * 1  IF(AV):1A  4 VRRM:40V *  Chip code PACKAGE MECHANICAL DATA  A Dimensions B Ref D G C F E K J Max. A 2.60 3.00 0.102 0.118 B 1.60 2.00 0.063 0.079 C 3.45 3.95 0.136 0.156 D 0.10 0.25 0.004 E 0.3 0.9 0.012 0.035 F 0.80 1.20 0.031 0.047 G 0.70 1.00 0.028 0.039 J 1.30 L SOD-123FL Inches Min. Min. 1.30 Max. 0.01 0.051 1.70 K L J Millimeters 0.067 0.051                         TEL：+86-513-83639777 -2 / 4- http://www.jjwdz.com JSPI140A TAPE AND REEL SPECIFICATION-SOD-123FL D0 P0 P2 Dimensions Ref. B0 W F E Cathode A0 P1       Millimeters Inches A0 1.95 ± 0.3 0.077± 0.012 B0 3.95 ± 0.3 0.156 ± 0.012 C 178 7.0 D0 1.55 ± 0.1 0.061 ± 0.004 E 1.75 ± 0.2 0.069 ± 0.008 E1 13.3 ± 0.3 0.524± 0.012 F 3.50 ± 0.2 0.138 ± 0.008 P0 4.00 ± 0.2 0.157 ± 0.008 P1 4.00 ± 0.2 0.157 ± 0.008 P2 2.00 ± 0.2 0.079 ± 0.008 W 8.0± 0.2 0.315 ± 0.008 W1 11.5 ± 1.0 0.453 ± 0.039   PART No. UNIT WEIGHT (g/PCS) typ. REEL (PCS) PER CARTON (PCS) DESCRIPTION JSPI140A 0.0144 3,000 150,000 7 inch reel pack   CHARACTERITICS CURVE  FIG.1: Typical forward characteristics (25℃) 10 FIG.2: Typical reverse characteristics Instantaneous reverse current ( mA) Instantaneous forward current (A) 10 1.0 1.0 0.1 0.1 TA=100℃ TA=25℃ 0.01 0 Forward voltage (V) 0.2 TEL：+86-513-83639777 0.4 0.6 0.8 1.0 0.01 0 -3 / 4- Percentage of peak reverse voltage (%) 20 40 60 80 100 http://www.jjwdz.com JSPI140A CHARACTERITICS CURVE  FIG.3: Maximum non-repetitive peak forward surge current FIG.4: Forward current derating curve Peak forward surge current (A) Average forward current (A) 30 1.5 8.3ms Single Half Sine-Wave JEDEC METHOD 25 20 1.0 15 0.5 10 5 0 Number of cycles at 60Hz 1 10 Lead temperature (℃ ) 0 0 100 50 FIG.5: Maximum transient thermal impedance 100 1000 10 100 1.0 10 0.1 tp(s) 1 10 150 FIG.6: Typical junction capacitance Rth(j-a)(℃/W) 0.1 0.01 100 Junction capacitance(pF) 1.0 0.1 100 Reverse voltage(V) 1 10 100       Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the 1.3rd version which is made in 26-Aug.-2021. This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright ©2021 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL：+86-513-83639777 -4 / 4- http://www.jjwdz.com