P6KE33A

JIEJIE MICROELECTRONICS CO. , Ltd P6KE Series 600W Transient Voltage Suppressor Rev.3.3 DESCRIPTION  The P6KE series of high current transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 6.8 volts to 600 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. DO-15 FEATURES                Low incremental surge resistance. Excellent clamping capability. Color band denoted cathode except bidirectional. Typical IR less than 1μA above 11V. High temperature wave soldering: 265℃/10s at terminals. Plastic package has underwriters laboratory flammability 94V-0. 600W peak pulse power capability at 10/1000μs waveform. Meets MSL level 1, per J-STD-020, LF maximum peak of 260℃. Terminal: solder plated, solderable per J-STD-002. Fast response time: typically less than 1.0ps from 0V to VBR min. UL 497B item recognized. (File No.:E480698). IEC61000-4-2 (ESD) ±30kV (air), ±30kV (contact). Symbol ABSOLUTE MAXIMUM RATINGS (TA=25℃, RH=45%-75%, unless otherwise noted)  Parameter Symbol Value Unit Operating junction and storage temperature range TJ,TSTG -55 to +175 ℃ PM(AV) 5.0 W PPP 600 W VF 5.0 V IFSM 100 A Steady state power dissipation at TL=75℃ Peak pulse power dissipation at 10/1000μs waveform Maximum instantaneous forward voltage at 50A for unidirectional Peak forward surge current, 8.3ms single half sine-wave for unidirectional only (NOTE 1) TEL：+86-513-83639777 -1 / 6- http://www.jjwdz.com 600W P6KE Series JieJie Microelectronics CO. , Ltd ABSOLUTE MAXIMUM RATINGS (TA=25℃, RH=45%-75%, unless otherwise noted, continued)  Parameter Symbol Value Unit Typical thermal resistance junction to lead RθJL 20 ℃/W Typical thermal resistance junction to ambient RθJA 75 ℃/W Notes： 1 Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum   ELECTRICAL CHARACTERISTICS (TA=25℃) Part Number VR IR@VR VBR@IT IT VC@IPP IPP① Uni-Polar Bi-Polar V max(μA) min(V) max(V) mA max(V) A P6KE6.8A P6KE6.8CA 5.8 150 6.45 7.14 10 10.5 58.1 P6KE7.5A P6KE7.5CA 6.4 120 7.13 7.88 10 11.3 54.0 P6KE8.2A P6KE8.2CA 7.02 50 7.79 8.61 10 12.1 50.4 P6KE9.1A P6KE9.1CA 7.78 20 8.65 9.55 1 13.4 45.5 P6KE10A P6KE10CA 8.55 10 9.50 10.50 1 14.5 42.1 P6KE11A P6KE11CA 9.4 5 10.50 11.60 1 15.6 39.1 P6KE12A P6KE12CA 10.2 2 11.40 12.60 1 16.7 36.5 P6KE13A P6KE13CA 11.1 1 12.40 13.70 1 18.2 33.5 P6KE15A P6KE15CA 12.8 1 14.30 15.80 1 21.2 28.8 P6KE16A P6KE16CA 13.6 1 15.20 16.80 1 22.5 27.1 P6KE18A P6KE18CA 15.3 1 17.10 18.90 1 25.2 24.2 P6KE20A P6KE20CA 17.1 1 19.00 21.00 1 27.7 22.0 P6KE22A P6KE22CA 18.8 1 20.90 23.10 1 30.6 19.9 P6KE24A P6KE24CA 20.5 1 22.80 25.20 1 33.2 18.4 P6KE27A P6KE27CA 23.1 1 25.70 28.40 1 37.5 16.3 P6KE30A P6KE30CA 25.6 1 28.50 31.50 1 41.4 14.7 P6KE33A P6KE33CA 28.2 1 31.40 34.70 1 45.7 13.3 P6KE36A P6KE36CA 30.8 1 34.20 37.80 1 49.9 12.2 P6KE39A P6KE39CA 33.3 1 37.10 41.00 1 53.9 11.3 P6KE43A P6KE43CA 36.8 1 40.90 45.20 1 59.3 10.3  P6KE47A P6KE47CA 40.2 1 44.70 49.40 1 64.8 9.4 P6KE51A P6KE51CA 43.6 1 48.50 53.60 1 70.1 8.7 TEL：+86-513-83639777 -2 / 6- http://www.jjwdz.com 600W P6KE Series JieJie Microelectronics CO. , Ltd ELECTRICAL CHARACTERISTICS (TA=25℃, continued) Part Number VR IR@VR VBR@IT IT VC@IPP IPP① Uni-Polar Bi-Polar V max(μA) min(V) max(V) mA max(V) A P6KE56A P6KE56CA 47.8 1 53.20 58.80 1 77.0 7.9 P6KE62A P6KE62CA 53.0 1 58.90 65.10 1 85.0 7.9 P6KE68A P6KE68CA 58.1 1 64.60 71.40 1 92.0 6.6 P6KE75A P6KE75CA 64.1 1 71.30 78.80 1 103.0 5.9 P6KE82A P6KE82CA 70.1 1 77.90 86.10 1 113.0 5.4 P6KE91A P6KE91CA 77.8 1 86.50 95.50 1 125.0 4.9 P6KE100A P6KE100CA 85.5 1 95.00 105.0 1 137.0 4.5 P6KE110A P6KE110CA 94.0 1 105.0 116.0 1 152.0 4.0  P6KE120A P6KE120CA 102.0 1 114.0 126.0 1 165.0 3.7 P6KE130A P6KE130CA 111.0 1 124.0 137.0 1 179.0 3.4 P6KE150A P6KE150CA 128.0 1 143.0 158.0 1 207.0 2.9 P6KE160A P6KE160CA 136.0 1 152.0 168.0 1 219.0 2.8 P6KE170A P6KE170CA 145.0 1 162.0 179.0 1 234.0 2.6 P6KE180A P6KE180CA 154.0 1 171.0 189.0 1 246.0 2.5 P6KE200A P6KE200CA 171.0 1 190.0 210.0 1 274.0 2.2 P6KE220A P6KE220CA 185.0 1 209.0 231.0 1 328.0 1.9 P6KE250A P6KE250CA 214.0 1 237.0 263.0 1 344.0 1.8 P6KE300A P6KE300CA 256.0 1 285.0 315.0 1 414.0 1.5 P6KE350A P6KE350CA 300.0 1 332.0 368.0 1 482.0 1.3 P6KE400A P6KE400CA 342.0 1 380.0 420.0 1 548.0 1.1 P6KE440A P6KE440CA 376.0 1 418.0 462.0 1 602.0 1.0 P6KE480A P6KE480CA 408.0 1 456.0 504.0 1 658.0 0.9 P6KE510A P6KE510CA 434.0 1 485.0 535.0 1 698.0 0.9 P6KE540A P6KE540CA 460.0 1 513.0 567.0 1 740.0 0.8 P6KE550A P6KE550CA 468.0 1 522.5 577.5 1 760.0 0.8 P6KE600A P6KE600CA 512.0 1 570.0 630.0 1 828.0 0.75  ① Surge waveform: 10/1000μs VR: Stand-off voltage -- Maximum voltage that can be applied VBR: Breakdown voltage VC: Clamping voltage -- Peak voltage measured across the suppressor at a specified IPP IR: Reverse leakage current TEL：+86-513-83639777 -3 / 6- http://www.jjwdz.com 600W P6KE Series JieJie Microelectronics CO. , Ltd RATINGS AND V‐I CHARACTERISTICS CURVES (TA=25℃, unless otherwise noted)  FIG.1:V- I curve characteristics (Uni-directional) IF VC VBR VR FIG.2:V- I curve characteristics (Bi-directional) I IPP I V VC VBR VR IR V F IT IT IR V IR IT IPP IPP FIG.3: Pulse waveform FIG.4: Pulse derating curve PPP derating in percentage(%) 100 IPPM(%IRSM) 150 tr = rise time to peak value td = decay time to half value tr=10μs 100 VR VBR VC 80 Peak value 60 Half value 40 50 20 0 0 td 1.0 t(ms) 2.0 3.0 0 0 4.0 25 TJ(℃) 75 100 50 125 150 175   SOLDERING PARAMETERS  Reflow Condition Reflow condition +150℃ tp -Temperature Max(Ts(max)) +200℃ TP -Time (Min to Max) (ts) 60-180 secs. TL tL TS(max) 3℃/sec. Max Ts(max) to TL - Ramp-up Rate 3℃/sec. Max -Temperature(TL)(Liquidus) +217℃ -Temperature(tL) 60-150 secs. Ramp-down Preheat TS(min) 25 Peak Temp (Tp) +260(+0/-5)℃ Time within 5℃of actual Peak Temp (tp) 20-40secs. Ramp-down Rate 6℃/sec. Max Time 25℃ to Peak Temp (TP) 8 min. Max Do not exceed +260℃ TEL：+86-513-83639777 Critical Zone TL to TP Ramp-up Average ramp up rate (Liquidus Temp (TL)to peak) Reflow   Temperature Pre Heat -Temperature Min (Ts(min)) Pb-Free assembly (see figure at right) -4 / 6- ts time to peak temperatue (t 25℃ to peak) Time   Flow/Wave Soldering(Solder Dipping) Peak temperature 265℃ Dipping time 10 sec. Soldering 1 time http://www.jjwdz.com 600W P6KE Series JieJie Microelectronics CO. , Ltd MARKING＆ORDERING INFORMATION  P6KE xx A (1) (2) (3) (1)Series: 600 watts series Product Type (2)VBR voltage code (3)5% VBR voltage tolerance Cathode Band P6KExxA P6KExxCA P6KE xx C A (1) (2) (3) (4) (1)Series: 600 watts series Product Type (2)VBR voltage code (3)Bi-directional (4)5% VBR voltage tolerance   PACKAGE MECHANICAL DATA  Dimensions C D Ref. A B A DO-15   Millimeters Inches Min. Max. Min. Max. A 25.40 - 1.000 - B 5.80 7.62 0.228 0.300 C 0.71 0.86 0.028 0.034 D 2.60 3.60 0.102 0.142 L1 E TAPE AND BOX SPECIFICATION‐DO‐15  A 5.0±0.5 0.197±0.020 B 53.0±1.5 2.087±0.059 C 6.0±0.5 0.236±0.020 D 1.2(MAX) 0.047(MAX) E 0.8(MAX) 0.031(MAX) F 1.5(MAX) 0.059(MAX) │L1-L2│ 1.0(MAX) 0.039(MAX) W 80±5.0 3.150±0.197 L 250±5.0 9.843±0.197 Z 115±5.0 4.528±0.197 B Inches Z F C A L Dimensions Millimeters L2 D Ref. W   PART No. UNIT WEIGHT (g/PCS) typ. PER BOX (PCS) PER CARTON (PCS) DESCRIPTION P6KExxA/CA 0.42 2,000 20,000 Box TEL：+86-513-83639777 -5 / 6- http://www.jjwdz.com 600W P6KE Series JieJie Microelectronics CO. , Ltd   Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the 3.3rd version which is made in 2-Aug.-2021. This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright©2021 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL：+86-513-83639777 -6 / 6- http://www.jjwdz.com