SMBJ3.3A

JIEJIE MICROELECTRONICS CO. , Ltd SMBJ3.3A 600W Transient Voltage Suppressor Rev.2   FEATURES:          Planar technology. Halogen-free and ROHS compliant. Stand-off voltage:3.3V. 600W peak pulse power capability at 10×1000μs waveform. Excellent clamping capability. Fast response time.   SMB    Symbol ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)  Parameter Symbol Value Unit TSTG/TJ -55 to +150 ℃ PM(AV) 5.0 W PPP 600 W Storage operating junction temperature range Steady state power dissipation at TL=75℃ Peak pulse power dissipation on 10/1000μs waveform   MARKING  1409 U03A : Device Marking Code 1409: In ninth week, 2014 U03A   ELECTRICAL CHARACTERISTICS (TA=25℃) ① Part Number VR IR@VR VBR@IT IT VC@IPP IPP① CO② V μA V (min) mA V (max) A (max) pF(typ.) SMBJ3.3A 3.3 100 4.1 1 7.3 82.5 4100 Marking U03A Surge waveform: 10/1000μs ② CO is measured at: Vbias=0V,VRMS=1V,f=1MHz VR: Stand-off voltage -- Maximum voltage that can be applied VBR: Breakdown voltage VC: Clamping voltage -- Peak voltage measured across the suppressor at a specified IPP IR: Reverse leakage current     TEL：+86-513-83639777 - 1 / 4 - http://www.jjwdz.com 600W /SMBJ3.3A                                                 JieJie Microelectronics CO. , Ltd ORDERING INFORMATION      RATINGS AND V‐I CHARACTERISTICS CURVES (TA=25ºC, unless otherwise noted) FIG.1:V- I curve characteristics (Uni-directional) IF FIG.2: Pulse waveform IPPM(%IRSM) 150 I tr=10μs 100 V C V BR V R tr = rise time to peak value td = decay time to half value Peak value V Half value I RV F IT 50 IPP 0 0 td 1.0 t(ms) 2.0 3.0 4.0 FIG.3: Pulse derating curve P PP derating in percentage(%) 100 80 60 40 20 0 0 25 50 T A (℃ ) 75 100 125 150 175                 TEL：+86-513-83639777 - 2 / 4 - http://www.jjwdz.com 600W /SMBJ3.3A                                                 JieJie Microelectronics CO. , Ltd SOLDERING PARAMETERS  Pb-Free assembly (see figure at right) Pre Heat -Temperature Min (Ts(min)) +150℃ -Temperature Max(Ts(max)) +200℃ -Time (Min to Max) (ts) 60-180 secs.   Average ramp up rate (Liquidus Temp (TL)to peak) 3℃/sec. Max Ts(max) to TL - Ramp-up Rate 3℃/sec. Max Reflow Reflow condition tp TP Critical Zone TL to TP Ramp-up TL -Temperature(TL)(Liquidus) +217℃ -Temperature(tL) 60-150 secs. tL TS(max) Temperature Reflow Condition Peak Temp (Tp) +260(+0/-5)℃ Time within 5℃of actual Peak Temp (tp) 20-40secs. Ramp-down Rate 6℃/sec. Max Time 25℃ to Peak Temp (TP) 8 min. Max Do not exceed +260℃ Ramp-down Preheat TS(min) 25 ts time to peak temperatue (t 25℃ to peak) Time     PACKAGE MECHANICAL DATA  B Dimensions H F A C Ref. D K J L J G E Millimeters Min. Max. Min. Max. A 3.30 3.94 0.130 0.155 B 4.30 4.80 0.169 0.189 C 1.90 2.20 0.075 0.087 D 0.95 1.52 0.037 0.060 E 5.20 5.60 0.205 0.220 F 0.051 0.203 0.002 0.008 G 0.15 0.31 0.006 0.012 H 2.10 2.40 0.083 0.094 J 2.20 TEL：+86-513-83639777 L 0.087 0.102 2.60 K DO-214AA (SMB) Inches 2.30 0.091   - 3 / 4 - http://www.jjwdz.com 600W /SMBJ3.3A                                                 JieJie Microelectronics CO. , Ltd TAPE AND REEL SPECIFICATION‐SMB  P0 P2 Cathode Ref. B0 W F E D0 A0 P1   Dimensions Millimeters Inches A0 3.76 ± 0.3 0.148 ± 0.012 B0 5.69± 0.3 0.224 ± 0.012 C 330.0 13.0 D0 1.55 ± 0.1 0.061 ± 0.004 E 1.75 ± 0.2 0.069 ± 0.008 E1 13.3 ± 0.3 0.524± 0.012 0.217 ± 0.008 F 5.5 ± 0.2 P0 4.00 ± 0.2 0.157 ± 0.008 P1 8.00 ± 0.2 0.3145 ± 0.008 P2 2.00 ± 0.2 0.079 ± 0.008 W 12.0± 0.2 0.472 ± 0.008 W1 15.7 ± 2.0 0.618 ± 0.079 OUTLINE UNIT WEIGHT (g/PCS) typ. REEL (PCS) PER CARTON (PCS) REEL DIAMETERS (mm) SMBJ3.3A 0.098 3,000 48,000 330       Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the second version which is made in 10-Aug.-2017. This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright ©2017 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL：+86-513-83639777 - 4 / 4 - http://www.jjwdz.com