GP30D

Ｒ SEMICONDUCTOR RC GP G P30A THRU GP30M GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -3.0Amperes FEATURES GPRC( Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 3 Ampere operation at Ta=75℃ and 55℃ with no thermal runaway Typical IR less than 0.1uA High temperature soldering guaranteed:260℃ /10 seconds Plastic Package has Under writers Laboratory Flammability Classtification 94V-0 ０．２１０（５．３） ０．１９０（４．８） ＤＩＡ JF DO-201AD １．０（２５．４） ＭＩＮ ０．３７５（９．５０） ０．２８５（７．２０） MECHANICAL DATA Case: JEDEC DO-201AD molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.042ounce, 1.19 grams Dimensions in inches and (millimeters) ０．０５２（１．３２） ０．０４８（１．２２） ＤＩＡ １．０（２５．４） ＭＩＮ MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage to TA=105 C Maximum average Forward Rectified Current 0.5"(12.5mm)lead length at TL=105 C Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 3.0 A Maximum Reverse current at rated DC Blocking Voltage TA =25 C TA =150 C GP 30A 50 35 50 GP 30B 100 70 100 GP 30D 300 210 300 GP 30G 400 280 400 3.0 125.0 GP 30J 600 420 600 GP 30K 200 140 200 GP 30M 1000 700 1000 Volts Volts Volts Volts Amps Amps Volts A C/W PF C C VRRM VRMS VDC I(AV) IFSM VF IR R JA 1.0 5.0 100.0 20.0 40.0 +150.0 -50 to+175 Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Maximum DC Blocking Voltage temperature Operating and Storage temperature Range CJ TA TJ TSTG Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length , P.C.B. mounted 7-38 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM S ILICON RECTIFIER R ATINGS AND CHARACTERISTIC CURVES GP30A THRUGHP30M FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES ４ 　１００ FIG.2-TYPICAL INSTANTANEOUS FORWARD VOLTAGE.(V) ３ ２ SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length 　３０ INSTANTANEOUS FORWARD CURRENT( AMPERES) １ 　１０ ０ ０ ２５ ５０ ７５ １００ １２５ １５０ １７５ ３ LEAD TEMPERATURE ( C) １ ０．１ TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT ２００ １００ ０．３ ０．０１ NON-REPETITIVE PEAK FORWARD SURGE CURRENT(AMPERES) ０．４ ０．６ ０．８ １．０ １．２ １．４ １．６ １．８ ５０ INSTANTANEOUS FORWARD V OLTAGE (VOL TS) 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) FIG.4-TYPICAL REVERSE CHARACTERISTICS １０ １００ １０ ０ １ NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT ( A) １．０ FIG.5-TYPICAL JUNCTION CAPACITANCE 　２００ 　１００ ０．１ JUNCTION CAPACITANCE(pF) TJ=25 C TJ=25 C ０．０１ ０ ２０ ４０ ６０ ８０ １００ １２０ １４０ 　１０ PERCENT OF RATED PEAK REVERSE VOLT AGE % 　１ ０．１ １ １０ １００ REVERSE VOLTAGE.( VOL TS) 7-39 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM S ILICON RECTIFIER