KBP310

KBP3005 THRU KBP310 R BRIDGE RECTIFIER Reverse Voltage: 50 to 1000 Volts Forward Current: 3.0 Amps S E M I C O N D U C T O R KBP Features · · · · · Glass passivated die construction Low forward voltage drop High current capability High surge current capability Plastic material-UL flammability 94V-0 0.581(14.75) 0.561(14.25) 0.144(3.65) 0.132(3.35) 0.417(10.6) 0.402(10.2) Mechanical Data · Case: KBP, molded plastic · Terminals: plated leads solderable per · · · · 0.043(1.1) 0.031(0.8) 0.087(2.2) 0.071(1.8) 0.056(1.42) 0.048(1.22) 0.583(14.8) 0.563(14.3) MIL-STD-202, Method 208 Polarity: as marked on case Mounting position: Any Marking: type number Lead Free: For RoHS / Lead Free Version 0.022(0.55) 0.012(0.3) 0.16(4.06) 0.14(3.56) 0.034(0.86) 0.03(0.76) Dimensions in inches and(millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL KBP 301 KBP 302 KBP 304 KBP 306 KBP 308 KBP 310 UNITS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRWM RMS Reverse Voltage VRMS Average Rectified Output Current (Note 1) @TA=50 ℃ KBP 3005 VDC IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 60 A Forward Voltage per element @IF=3.0A VFM 1.1 V Peak Reverse Current At Rated DC Blocking Voltage @TA=25℃ @TA=125℃ IR 5.0 500 uA RθJA 30 RθJL 11 TJ,TSTG -55to+150 Typical Thermal Resistance per leg (Note 2) Operating and Storage Temperature Range Note:1. Mounted on glass epoxy PC board with 1.3mm 2 solder pad. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.. JINAN JINGHENG ELECTRONICS CO., LTD. 2-1 HTTP://WWW.JINGHENG.CN ℃/W ℃ RATINGS AND CHARACTERISTIC CURVES KBP3005 THRU KBP310 Fig. 2 Typical Fwd Characteristics IF, INSTANTANEOUS FWD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) Fig. 1 Forward Current Derating Curve 3.0 2.0 1.0 10 TA= 25°C 1.0 0.1 Pulse Width = 300 µs 0 0 50 0 00 1 0 150 0.4 0.6 0.8 1.0 100 100 Cj, JUNCTION CAPACITANCE (pF) Single HalfSine-Wave Pulse Width =8.3ms (JEDEC Method) 50 40 30 10 100 TJ = 25°C f = 1MHz 10 0 0 0 1.4 Fig. 4 Typical Junction Capacitance Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 60 1.2 VF, INSTANTANEOUS FWD VOLTAGE (V) T,TE MPERATURE (°C) IFSM , PEAK FWD SURGE CURRENT (A) 0.2 0 10 100 VR, REVERSE VOLT AGE (V) NUMBER OF CYCLES AT 60 Hz IR, INSTANTANEOUSREVERSE CURRENT (μA) Fig. 5 T ypical Reverse Characteristics (per element) 100 TJ = 125°C 10 1.0 TJ = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) JINAN JINGHENG ELECTRONICS CO., LTD. 2-2 HTTP://WWW.JINGHENG.CN