RGP10A

Ｒ SEMICONDUCTOR G C PR R GP10A THRU RGP10M FAST RECOVERY RECTIFIER Reverse Voltage: 50 to 1000 Volts Forward Current:1.0Ampere FAST RECOVERY RECTIFIER FEATURES GPRC( Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Fast switching speed Construction utilizes void-free molded plastic technique 1.0A operation at TA=75 C with to terminal runaway High temperature soldering guaranteed:250 C/10 seconds, 0.375"(9.5mm) lead length,5 lbs.(2.3kg)tension. JF DO-41 １．０（２５．４） ＭＩＮ ０．１０７（２．７） ０．０８０（２．０） ＤＩＡ ０．２０５（５．２０） ０．１８０（４．１０） MECHANICAL DATA Case: JEDEC DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750,method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012ounce, 0.33 gram Dimensions in inches and (millimeters) １．０（２５．４） ＭＩＮ ０．０３４（０．８５） ０．０２８（０．７１） ＤＩＡ MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified.Single phase ,half wave ,60HZ,resistive or inductive load. For capacitive load,derate current by 20%.) Symbols Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375"(9.5mm)lead length at TA=75 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) at TA=25 C Maximum Instantaneous Forward Voltage at 1.0 A Maximum DC Reverse Current at rated DC blocking voltage Maximum full load reverse current full cycle average. 0.375"(9.5mm)lead length at TL=55 C Maximum reverse recovery time(Note1) Typical junction capacitance(Note2) Operating junction and storage temperature range RGP 10A 50 35 50 RGP 10B 100 70 100 RGP 10D 200 140 200 RGP 10G 400 280 400 1.0 30.0 1.3 5.0 RGP 10J 600 420 600 RGP 10K 800 560 800 RGP 10M 1000 700 1000 Units VRRM VRMS VDC I(AV) IFSM VF IR Volts Volts Volts Amp Amps Volts A 100 Trr CJ TJ TSTG 150 15.0 -65 to+150 250 500 ns PF C Note: 1.Test conditions: IF=0.5A,IR=1.0A,IRR=0.25A. 2.Measured at 1MHZ and applied reverse voltage of 4.0 Volts. 9-16 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM R ATINGS AND CHARACTERISTIC CURVES RGP10A THRU RGP10M FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT (A) １．０ ０．８ ０．６ ０．４ ０．２ ０ ０ ２５ ５０ ７５ １００ １２５ １５０ １７５ FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT ５０ 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) PEAK FORWARD SURGE CURRENT(AMPERES) ４０ ３０ ２０ SINGIE PHASE HAIF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD １０ ０ １ ２ ４ ６ ８ １０ ２０ ４０ ６０ １００ AMBIENT TEMPERATURE ( C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS ２０ １０ INSTANTANEOUS REVERSE CURRENT ,( A) INSTANTANEOUS FORWARD CURRENT( AMPERES) １０ ６．０ ４．０ ２．０ １．０ ０．６ ０．４ ０．２ ０．１ ０．０６ ０．０４ ０．０２ ０．０１ ０ ２０ ４０ ６０ ８０ １００ １２０ １４０ TJ=25 C ３ １ ０．３ ０．１ TJ=25 C Pulse Width=300 s 1% Duty Cycle ０．０３ ０．０１ ０．４ ０．６ ０．８ １．０ １．２ １．４ １．６ １．８ PERCENT OF RATED PEAK REVERSE VOLTA GE(%) INSTANTANEOUS FORWARD VOL TAGE (VOLTS) FIG.5-TYPICAL JUNCTION CAPACITANCE ２００ １００ FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC JUNCTION CAPACITANCE(pF) ６０ ４０ ２０ １０ ６ ４ ２ １ ０．１ ０．２ ０．４ １ ２ ４ １０ ２０ ４０ １００ TJ=25 C 50W NONINDUCTIVE 10W NONINDUCTIVE ＋０．５Ａ (＋) 25Vdc (APPROX) (－) Ｔｒｒ D.U.T. PULSE GENERATOR (NOTE2) ０ －０．２５Ａ 1 NONINDUCTIVE OSCILLOSCOPE (NOTE1) NOTES:1.Rise Time=7ns max. input lmpedance=1 megohm 22pF 2.Rise Time=10ns max. source lmpedance =50 ohms －１．０Ａ １ｃｍ SET TIME BASE FOR 50/100 ns/cm REVERSE VOLTAGE. (V) 9-17 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM FAST RECOVERY RECTIFIER