S3K

Ｒ S 3A THRU S3M GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -3.0Amperes SEMICONDUCTOR FEATURES The plastic package has Underwrites Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique High surge current capability 3.0A operation at TL=75 C with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 250 C/10 seconds,0.375"(9.5mm) SMB(DO-214AA) ０．１５５（３．９４） ０．１３０（３．３０） ０．０８６（２．２０） ０．０７７（１．９５） ０．１８０（４．５７） ０．１６０（４．０６） MECHANICAL DATA Case: JEDEC SMB(DO-214AA) molded plastic body Terminals: solder plated ,solderable per MIL-STD-750,method 2026 Polarity: color band denotes cathode end Weight: 0.003ounce,0.093 gram ０．０９６（２．４４） ０．０８４（２．１３） ０．０６０（１．５２） ０．０３０（０．７６） ０．２２０（５．５９） ０．２０５（５．２１） ０．０１２（０．３０５） ０．００６（０．１５２） ０．００８（０．２０３） 　　　　ＭＡＸ MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Dimensions in inches and (millimeters) (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage to TA=105 C Maximum average Forward Rectified Current 0.5"(12.5mm)lead length at TL=105 C Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 3.0 A Maximum Reverse current at rated DC Blocking Voltage TA =25 C TA =150 C S3A 50 35 50 S3B 100 70 100 S3D 300 210 300 S3G 400 280 400 3.0 125.0 S3J 600 420 600 S3K 200 140 200 S3M 1000 700 1000 Volts Volts Volts Volts Amps Amps Volts A C/W PF C C VRRM VRMS VDC I(AV) IFSM VF IR R JA 1.0 5.0 100.0 20.0 40.0 +150.0 -50 to+175 Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Maximum DC Blocking Voltage temperature Operating and Storage temperature Range CJ TA TJ TSTG Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length , P.C.B. mounted 7-40 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM S ILICON RECTIFIER R ATINGS AND CHARACTERISTIC CURVES S3A THRU S3M FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES ４ 　１００ FIG.2-TYPICAL INSTANTANEOUS FORWARD VOLTAGE.(V) ３ ２ SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length 　３０ INSTANTANEOUS FORWARD CURRENT( AMPERES) １ 　１０ ０ ０ ２５ ５０ ７５ １００ １２５ １５０ １７５ ３ LEAD TEMPERATURE ( C) １ ０．１ TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT ２００ １００ ０．３ ０．０１ ０．４ ０．６ ０．８ １．０ １．２ １．４ １．６ １．８ PEAK FORWARD SURGE CURRENT(AMPERES) NON-REPETITIVE INSTANTANEOUS FORWARD V OLTAGE (VOL TS) ５０ FIG.4-TYPICAL REVERSE CHARACTERISTICS １０ 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) ０ １ １０ １００ INSTANTANEOUS REVERSE CURRENT ( A) NUMBER OF CYCLES AT 60Hz １．０ FIG.5-TYPICAL JUNCTION CAPACITANCE 　２００ 　１００ ０．１ TJ=25 C JUNCTION CAPACITANCE(pF) ０．０１ ０ ２０ ４０ ６０ ８０ １００ １２０ １４０ TJ=25 C PERCENT OF RATED PEAK REVERSE VOLT AGE % 　１０ 　１ ０．１ １ １０ １００ REVERSE VOLTAGE.( VOL TS) 7-41 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM S ILICON RECTIFIER