2N5886

Product Specification www.jmnic.com Silicon NPN Power Transistors DESCRIPTION ・With TO-3 package ・Complement to type 2N5883 2N5884 APPLICATIONS ・They are intended for use in power linear and switching applications PINNING PIN 1 2 3 Base Emitter Collector DESCRIPTION 2N5885 2N5886 Fig.1 simplified outline (TO-3) and symbol Absolute maximum ratings(Ta=℃) SYMBOL VCBO PARAMETER 2N5885 Collector-base voltage 2N5886 VCEO VEBO IC ICM IB PD Tj Tstg Collector-emitter voltage Emitter-base voltage Collector current Collector current-peak Base current Total Power Dissipation Junction temperature Storage temperature TC=25℃ 2N5885 Open base 2N5886 Open collector 80 5 25 50 7.5 200 200 -65~200 V A A A W ℃ ℃ Open emitter 80 60 V CONDITIONS VALUE 60 V UNIT THERMAL CHARACTERISTICS SYMBOL Rth j-c PARAMETER Thermal resistance junction to case VALUE 0.875 UNIT ℃/W JMnic Product Specification www.jmnic.com Silicon NPN Power Transistors 2N5885 2N5886 CHARACTERISTICS Tj=25℃ unless otherwise specified SYMBOL VCEO(sus) PARAMETER Collector-emitter sustaining voltage 2N5885 IC=0.2A ;IB=0 2N5886 IC=15A; IB=1.5A IC=25A; IB=6.25A IC=25A; IB=6.25A IC=10A ; VCE=4V VCB=ratedVCBO; IB=0 2N5885 ICEO Collector cut-off current 2N5886 Collector cut-off current (VBE(off)=1.5V) Emitter cut-off current DC current gain DC current gain DC current gain Trainsistion frequency VCE=40V; IB=0 VCE=ratedVCEO; VCE=ratedVCEO; TC=150℃ VEB=5V; IC=0 IC=3A ; VCE=4V IC=10A ; VCE=4V IC=25A ; VCE=4V IC=1A ; VCE=10V;f=1MHz 35 20 4 4 MHz 100 1 10 1 mA mA mA VCE=30V; IB=0 2 mA 80 1 4 2.5 1.5 1 V V V V mA CONDITIONS MIN 60 V TYP. MAX UNIT VCEsat-1 VCEsat-2 VBEsat VBE ICBO Collector-emitter saturation voltage Collector-emitter saturation voltage Collector-emitter saturation voltage Base-emitter on voltage Collector cut-off current ICEV IEBO hFE-1 hFE-2 hFE-3 fT Switching times tr ts tf Rise time Storage time Fall time IC=10A ;IB1=- IB2=1A VCC=30V 0.7 1.0 0.8 μs μs μs JMnic Product Specification www.jmnic.com Silicon NPN Power Transistors PACKAGE OUTLINE 2N5885 2N5886 Fig.2 outline dimensions (unindicated tolerance:±0.10mm) JMnic