0433BM41A0019E

"High Frequency Ceramic Solutions" 433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive Component for SiLabs Si4455, Si4460, Si4461, Si4463, and Si4464 Chipsets Detail Specification: P/N 0433BM41A0019 5/30/2017 General Specifications Part Number Frequency Range(MHz) Page 1 of 5 0433BM41A0019 424-444 Si4455, Si4460, Si4461, Si4463, Si4464 50Ω (single ended) Balanced Impedance Unbalanced impedance Average Insertion Loss when connected to Si44XX chipset (Active OP Tx/Rx) 0.9dB Typ@25C 1.5dB max. (-45 to +85C) 180° ± 10 2.0 max. 2.0 max. 4,000 -40 to +85°C Phase Diff. (deg.) VSWR @ BW 1.6dB Typ in Rx, 1.4dB Typ in Tx Amplitude Difference (dB) @25C 2.2dB max. in Rx, 1.9dB Reel Quanity max. in Tx (-45 to +85C) Operating Temperature Insertion Loss when component measured by itself(passive insertion loss) 35 min. @ 2xfo MHz 35 min. @ 3xfo MHz 35 min. @ 4xfo MHz 35 min. @ 5xfo MHz Attenuation dB (min.) Recommended Storage Conditions for Unused product on T&R Input Power +5 ~ +35 °C, Humidity 45~75%RH, 18 months. 500mW max. (CW) Download the gerber files at: https://www.johansontechnology.com/silabs Part Number Explanation P/N Suffix Packing Style Termination style Mechanical Dimensions In 0.126 ± 0.008 L 0.098 ± 0.008 W 0.059 ± 0.006 T 0.022 ± 0.006 a1 0.028 ± 0.008 a2 0.004 min. b 0.012 + 0.008 c 0.018 + 0.006 g 0.039 + 0.008 p Bulk T&R Ni/Sn Suffix = S Suffix = E Suffix = None Terminal Configuration No. No. Function 1 GND 5 2 Ant 6 3 GND 7 4 GND 8 mm 3.20 ± 0.20 2.50 ± 0.20 1.50 ± 0.15 0.55 ± 0.15 0.70 ± 0.20 0.1 min. 0.30 + 0.20 0.45 + 0.15 1.00 + 0.20 a2  p a1 T c L     Function GND TX RXN RXP     W g eg. 0433BM41A0019S eg. 0433BM41A0019E eg. 0433BM41A0019(E or S) b DC Connection for Pins (1) Pin1 – Pin3 – Pin4 – Pin5 (2) Pin2 – Pin7– Pin8 Unit :mm Do you need to download the reference design/layout files? Go to: https://www.johansontechnology.com/silabs www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2017 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive Component for SiLabs Si4455, Si4460, Si4461, Si4463, and Si4464 Chipsets P/N 0433BM41A0019 5/30/2017 Detail Specification: Page 2 of 5 Mounting Considerations * Line/Via width should be designed to match 50Ohm characteristic impedance, depending on PCB material and thickness. Download gerber files at: https://www.johansontechnology.com/silabs * * Solder Resist Land Through-hole (φ 0.3) Do you need the layout/gerber files of the above? Go to: https://www.johansontechnology.com/silabs or send us a message at: https://www.johansontechnology.com/ask-a-question Measuring Diagram Rx Mode Tx Mode Port3 Network Analyzer* Port2 Port3 Network Analyzer* Port2 Port 4 Port 1 Port 4 Port 1 (42.2-j81.6 Ω) (50 Ω) (3.5k // 1.65pF ) (50 Ω) GND GND GND GND GND GND GND GND Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2017 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive Component for SiLabs Si4455, Si4460, Si4461, Si4463, and Si4464 Chipsets Detail Specification: P/N 0433BM41A0019 5/30/2017 Page 3 of 5 Measuring Diagram (cont. ) Tx Mode: Port1: Antenna Port Port1 Terminate impedance: 50ohm Ports 2 and 3: Rx Balanced Port Port 2 and 3 Terminate impedance: 1/2 x (the loading impedance ZIC,RX off of Si4455) Port4: Tx Port Port4 Terminate impedance: Complex conjugate to ZIC,TX on of Si4455 RXMode: Port 1: Antenna Port Port1 Terminate impedance: 50ohm Ports 2 and 3: Rx Balanced Port Port 2 and 3 Terminate impedance: Complex conjugate to 1/2 x (Balance impedance of ZIC,RX on of Si4455) Port4: Tx Port Port4 Terminate impedance: The loading impedance ZIC,TX off of Si4455 IL=Sds21 RL=Sss11 / Sdd22 Amp_balance = dB(S(3,1)/S(2,1)) IL = S41 RL = S11 / S44 Typical Electrical Characteristics (T=25oC) TX mode: Insertion and Return Loss 0 -10 RL_S44 RL_S11 IL_S41 -20 -30 -40 -50 -60 0.3 1.3 2.3 3.3 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2017 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive Component for SiLabs Si4455, Si4460, Si4461, Si4463, and Si4464 Chipsets P/N 0433BM41A0019 5/30/2017 Detail Specification: Page 4 of 5 Typical Electrical Characteristics (T=25oC) RX mode: Insertion and Return Loss 0 RL_Sdd22 RL_Sss11 IL_Sds21 -10 -20 -30 -40 -50 1.3 Amplitude and Phase Balance 2.3 3.3 freq, GHz 2 200 1 100 0 0 -1 -100 -2 350 380 410 440 470 Phase_diff Amp_diff RX mode: -60 0.3 -200 500 freq, MHz Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2017 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive Component for SiLabs Si4455, Si4460, Si4461, Si4463, and Si4464 Chipsets P/N 0433BM41A0019 5/30/2017 Detail Specification: Page 5 of 5 Application Notes, Layout Files, and more www.johansontechnology.com/silabs RoHS Compliance www.johansontechnology.com/technical-notes/rohs-compliance.html Soldering Information www.johansontechnology.com/ipcsoldering-profile Antenna layout and tuning techniques www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipcantennaservices MSL Info www.johansontechnology.com/technical-notes/msl-rating Recommneded Storage Condition and Max Shelf Life www.johansontechnology.com/recommended-storage-conditions Packaging information www.johansontechnology.com/tape-reel-packaging Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2017 Johanson Technology, Inc. All Rights Reserved