1720BL15A0100E

High Frequency Ceramic Solutions P/N 1720BL15A0100 625 - 2815MHz Wideband Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: 9/23/2021 Page 1 of 4 General Specifications 1720BL15A0100 625 - 2815 50 100 1.5 max. 9.5 min. 180 ± 10 1.0 max. 20 min. 3 max. (CW) 4,000 -40 to +105°C +5 to +35°C Humidity 45 - 75% RH 18 months max. Part Number Frequency (MHz) Unbalanced Impedance (Ω) Balanced Impedance (Ω) Insertion Loss (dB) Return Loss (dB) Phase Difference (deg.) Amplitude Difference (dB) CMRR (dB) Power Capacity (W) Reel Quanity (pcs./reel) Operating Temperature Recommended Storage Conditions and Period for unused Product on T&R Top Bottom You can download measured s-parameters of this component at: https://www.johansontechnology.com/baluns Part Number Explanation Packing Style P/N Suffix Termination Style Evaluation Board Bulk (loose pcs.) Suffix = S Eg. 1720BL15A0100S T&R Suffix = E Eg. 1720BL15A0100E Ni/Sn Suffix = None Eg. 1720BL15A0100(E or S) 1720BL15A0100-EB1SMA (3 female SMA connectors) Terminal Configuration Mechanical Dimensions mm In L 0.079 ± 0.004 2.00 ± 0.10 W 0.049 ± 0.004 1.25 ± 0.10 T 0.037 ± 0.004 0.95 ± 0.10 W c a 0.012 ± 0.004 0.30 ± 0.10 L b 0.008 ± 0.004 0.20 ± 0.10 c 0.012 +0.004/0.008 0.30 +0.1/-0.2 a g 0.014 ± 0.004 0.35 ± 0.10 p 0.026 ± 0.002 0.65 ± 0.05 p T g b 1 Unbalanced Port 2 GND or DC feed + RF GND 3 Balanced Port 4 Balanced Port 5 GND 6 NC        Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions P/N 1720BL15A0100 625 - 2815MHz Wideband Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: 9/23/2021 Page 2 of 4 Mounting Considerations Mount these devices with colored mark facing up. 0.35 Units in mm Solder Resist * Land Through-hole (Ф0.3) 1.0 0.8 * Transmission line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness.. 0.30 Need help with the layout, s-parameters, simulation, or design validation? Send us a message at: https://www.johansontechnology.com/ask-a-question Measuring Diagram Port1(50Ω) Network Analyzer** Port 3* Port 2* Port 1:Unbalanced Port Ports 2 and 3: Balanced Port IL=Sds21 RL=Sss11 Amp_balance = dB(S(2,1)/S(3,1)) Phase_balance = Phase(S(2,1)/S(3,1)) *Impedance for ports 2 and 3 = Balanced Impedance/2 **E5071B from Agilent Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions P/N 1720BL15A0100 625 - 2815MHz Wideband Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: 9/23/2021 Page 3 of 4 Typical Electrical Characteristics (T=25°C) Insertion and Return Loss 0 CMRR dB(Sss11) dB(Sds21) dB(Sdd22) -10 -20 -30 -40 0.5 1.0 1.5 2.0 2.5 3.0 f req, GHz Amplitude and Phase Balance 4 180 135 90 45 0 0 -45 -2 Phase_diff Amp_diff 2 -90 -135 -4 0.5 1.0 1.5 2.0 2.5 -180 3.0 f req, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions P/N 1720BL15A0100 625 - 2815MHz Wideband Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: 9/23/2021 Page 4 of 4 Application Notes, Layout Files, and more https://www.johansontechnology.com/baluns Packaging information https://www.johansontechnology.com/tape-reel-packaging Soldering Information https://www.johansontechnology.com/ipcsoldering-profile MSL Info https://www.johansontechnology.com/msl-rating Recommended Storage Condition and Max Shelf Life https://www.johansontechnology.com/recommended-storage-conditions RoHS Compliance https://www.johansontechnology.com/rohs-compliance Antenna layout and tuning techniques https://www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services https://www.johansontechnology.com/ipc-antenna-services P/N Explanation and Breakdown https://www.johansontechnology.com/ipc-pn-explained Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.0 2021 Johanson Technology, Inc. All Rights Reserved