1850BL15B050E

High Frequency Ceramic Solutions 1850 MHz EIA 0805 1:1 RF Balun P/N 1850BL15B050 Detail Specification: 1/18/2019 Page 1 of 4 General Specifications Part Number 1850BL15B050 Unbalanced Impedance (single ended) 50 Ω Differential Balanced Imp. 50 Ω Operating Frequency 1 (MHz) 1700 ~ 2000 Insertion Loss, Oper Freq 1 1.0 dB max. Return Loss, Oper Freq 1 9.5 dB min. Operating Frequency 2 (MHz) 1700 ~ 2300 Insertion Loss, Oper Freq 2 1.1 dB max. Power Capacity Return Loss, Oper Freq 2 9.0 dB min. Operating Temperature -40 to +105°C Storage Temperature Range -40 to +105°C Phase Difference (1&2) 180 ± 10 deg. Amplitude Difference (1&2) 2 dB max. 3 W max. (CW) 4,000 pcs Reel Quantity You can download measured s-parameters of this component at: http://www.johansontechnology.com/rfbaluns Mechanical Dimensions In L W T a b c g p Terminal Configuration mm 0.079 ± 0.004 0.049 ± 0.004 2.00 ± 0.10 1.25 ± 0.10 0.033 ± 0.004 0.012 ± 0.004 0.85 ± 0.10 0.30 ± 0.10 0.008 ± 0.004 0.012 +0.004/0.008 0.20 ± 0.10 0.30 +0.1/-0.2 0.014 ± 0.004 0.026 ± 0.002 0.35 ± 0.10 0.65 ± 0.05 W L a c 1 Unbalanced Port 4 Balanced Port 2 GND or DC Feed+RF GND 5 GND 3 Balanced Port 6 NC p 3 2 1 4 5 6 T b g Mounting Considerations 0.65 * 0.35 0.50 1.0 0.65 * 0.35 Mount these devices with Solder 0.2 0.8 1.0 0.2 0.8 1.0 Land Through-hole (Ф0.3) *Line width should be 0.25 0.3 Without DC Feed 0.25 0.3 With DC Feed designed to provide 50ohm impedance Need our help laying this out for you? Need the layout file? Send us a message at: www.johansontechnology.com/component/techquestion Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.2 2019 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 1850 MHz EIA 0805 1:1 RF Balun P/N 1850BL15B050 Detail Specification: 1/18/2019 Page 2 of 4 Typical Electrical Characteristics (T=25°C) Insertion and Return Loss Amplitude and Phase Balance Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.2 2019 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 1850 MHz EIA 0805 1:1 RF Balun P/N 1850BL15B050 Detail Specification: 1/18/2019 Page 3 of 4 Equivalent Circuit PIN6 Unbalanced Port PIN1 PIN2 λ/4 λ/4 λ/4 λ/4 PIN4 Balanced Port1 PIN3 PIN2 Balanced Port2 Recommended Circuit when using DC-Feed (Pin 2) feature        12~15pF RF Choke (10nH) Note: The by-pass capacitor and RF choke should be placed as close as possible to Pin2 of balun! Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.2 2019 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 1850 MHz EIA 0805 1:1 RF Balun P/N 1850BL15B050 Detail Specification: 1/18/2019 Page 4 of 4 Part Number Explanation P/N Suffix Packing Style Termination style Evaluation Board Recommended Storage Conditions of unused product on T&R More Balun info at: Bulk Suffix = S T&R Suffix = E 100% Tin Suffix = None 1850BL15B050-EBSMA Eg. 1850BL15B050S Eg. 1850BL15B050E Eg. 1850BL15B050 (E or S) +5 to +35°C, 18 mos. max. Humidity 45~75% RH www.johansontechnology.com/baluns RoHS Compliance www.johansontechnology.com/rohs-compliance Packaging information Soldering Information www.johansontechnology.com/tape-reel-packaging www.johansontechnology.com/ipcsoldering-profile Layout Files, s-parameters and any other technical questions www.johansontechnology.com/ask-a-question MSL Info www.johansontechnology.com/msl-rating Recommneded Storage Condition and Max Shelf Life www.johansontechnology.com/recommended-storage-conditions Antenna layout and tuning techniques www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipc-antenna-services Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 2.2 2019 Johanson Technology, Inc. All Rights Reserved