2450BM14E0003T

High Frequency Ceramic Solutions 2.45GHz Impedance Matched Balun + Band Pass Filter: Optimized for Nordic's Chipsets: nRF51822-QFAA, nRF51422-QFAA, nRF51822-QFAB, nRF51422-QFAB, nRF51822-QFAC, nRF51422-QFAC, nRF51802-QFAA P/N 2450BM14E0003 Detail Specification: 6/29/2016 Page 1 of 4 For the Full App Note and Layout Files, go to: www.johansontechnology.com/nordic General Specifications Part Number 2450BM14E0003 Frequency (MHz) 2400 - 2500 50 Ω (single ended) Unbalanced Impedance Impedance matched to Nordic Semi Differential Balanced Impedance nRF51822-QFAx, nRF51422-QFAx, and nRF51802-QFAA chipsets Average Insertion Loss when connected to the nRF51XX chipset (Active OP) 0.9dB Typ. @25C, 1.5dB max. (-40 to +85C), 2.0dB (+85 to +105C) Insertion Loss when component measured by itself (passive insertion loss) 2.1dB typ. @25C, 2.5dB max. (-40 to +85C), 3.0dB (+85 to 105C) Return Loss (dB) Attenuation Differential mode (dB): 15 typ. 9.5 min. Amplitude Difference 800-928 MHz 15 typ.@25°C 10 min. Reel Quantity 1200-1500 MHz 14 typ.@25°C 10 min. Operating Temperature 4800~5000MHz 35 typ.@25°C 20 min. Storage Temperature 7200~7500MHz 21 typ.@25°C 18 min. Recommended Storage Conditions for unused product on T&R Attenuation Common mode (dB): 44 typ.@25°C 20 min. 4800~5000MHz 150 ± 15deg 4,000 pcs -40 to +105°C -40 to +85°C +5 to +35°C, Humidity: 4575%RH, 18 mos. Max Power Capacity 1W max.(CW) Part Number Explanation P/N Packaging Style Suffix Termination Style Bulk Suffix = S E.g.. 2450BM14E0003S T&R Suffix = T E.g.. 2450BM14E0003T 100% Tin Suffix = None E.g.. 2450BM14E0003(T or S) Mechanical Dimensions Terminal Configuration In mm No. Function 0.063 ± 0.004 0.031 ± 0.004 1.60 ± 0.10 0.80 ± 0.10 1 Unbalanced Port a 0.024 ± 0.004 0.008 ± 0.004 0.60 ± 0.10 0.20 ± 0.10 b 0.008 +.004/-.006 0.20 +0.1/-0.15 c g 0.006 ± 0.004 0.012 ± 0.004 0.15 ± 0.10 0.30 ± 0.10 p 0.020 ± 0.002 0.50 ± 0.05 L W T W c L a p T g b 2 GND 3 Balanced Port 4 Balanced Port 5 DC Feed 6 GND 3 2 1 4 5 6 You can download layout files, schematics, output power measured results (App Note AN020), and sparameters at: http://johansontechnology.com/nordic Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 3.0 2016 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.45GHz Impedance Matched Balun + Band Pass Filter: Optimized for Nordic's Chipsets: nRF51822-QFAA, nRF51422-QFAA, nRF51822-QFAB, nRF51422-QFAB, nRF51822-QFAC, nRF51422-QFAC, nRF51802-QFAA P/N 2450BM14E0003 Detail Specification: 6/29/2016 Page 2 of 4 Mounting Considerations 0.25 2.2nF Cap. Land Via Through * 6 5 4 1 2 3 nRF51X 0.3 0.55 *Line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness. 0.25 Do you need the layout/gerber files of the above? Go to: www.johansontechnology.com/nordic or send us a message to review your layout at: www.johansontechnology.com/component/ask-a-question Solo-Component Characterization Scheme Port 1* Network Analyzer** Port 3(50Ω) Port 2* GND Port 3: Unbalanced Port Ports 1 and 2: Balanced Port IL=Sds21, Att_DM=Sds21, Att_CM=Scs21 RL=Sss11 Amp_balance = dB(S(1,3)/S(2,3)) Phase_balance = Phase(S(1,3)/S(2,3)) *Impedance for ports 1 and 2 = Conjugate to Balanced Impedance/2 **E5071B from Agilent GND You can download layout files, schematics, output power measured results (App Note AN020), and s-parameters at: http://johansontechnology.com/nordic Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 3.0 2016 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.45GHz Impedance Matched Balun + Band Pass Filter: Optimized for Nordic's Chipsets: nRF51822-QFAA, nRF51422-QFAA, nRF51822-QFAB, nRF51422-QFAB, nRF51822-QFAC, nRF51422-QFAC, nRF51802-QFAA P/N 2450BM14E0003 Detail Specification: 6/29/2016 Page 3 of 4 Typical Electrical Characteristics (T=25°C) 0 Scs21 Sss11 Sds21 -10 -20 -30 -40 -50 0 1 2 3 4 7 6 5 8 4 5 req, GHz 6 7 8 4 180 2 135 0 90 -2 45 Phase_bal_deg Amp_bal_dB freq, GHz -4 0 2.30 2.35 2.40 2.45 2.50 2.55 2.60 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 3.0 2016 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.45GHz Impedance Matched Balun + Band Pass Filter: Optimized for Nordic's Chipsets: nRF51822-QFAA, nRF51422-QFAA, nRF51822-QFAB, nRF51422-QFAB, nRF51822-QFAC, nRF51422-QFAC, nRF51802-QFAA P/N 2450BM14E0003 Detail Specification: 6/29/2016 Page 4 of 4 Application Notes, Layout Files, and more www.johansontechnology.com/nordic Packaging information http://www.johansontechnology.com/tape-reel-packaging Soldering Information www.johansontechnology.com/ipcsoldering-profile MSL Info http://www.johansontechnology.com/msl-rating Recommended Storage Condition and Max Shelf Life http://www.johansontechnology.com/recommended-storage-conditions RoHS Compliance http://www.johansontechnology.com/rohs-compliance Antenna layout and tuning techniques www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services http://www.johansontechnology.com/ipc-antenna-services Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 3.0 2016 Johanson Technology, Inc. All Rights Reserved