2450BP15Q0100E

High Frequency Ceramic Solutions 2.4GHz High Rejection BPF with LGA-type terminations for reduced effective footprint, EIA 0805 P/N 2450BP15Q0100 Detail Specification: 9/22/2020 Page 1 of 4 General Specifications Part Number 2450BP15Q0100 2400 - 2500 Frequency (MHz) 1.8 max. @25 ̊C 2.0 max. @-40 to +85 ̊C Insertion loss (dB) 2.1 max. @-40 to +105 ̊C Return Loss (dB) 10 min. (Top) Power Capacity (W) 3 max. (CW) Operating Temperature -40 to +105°C (Buttom) Attenuation (dB) Reel Quantity 824 - 960 MHz 35 min. 1545 - 1605 MHz 30 min. 1710 - 1990 MHz 35 min. 2170 MHz 30 min. 4000 MHz 20 min. 4800 - 5000 MHz 30 min. 7200 - 7500 MHz 25 min. 4,000 pcs Recommended Solder Paste SAC 305 Recommended Storage Conditions for unused T&R product +5 to +35°C Humidity 45 - 75% RH 18 months max. *12 months in vacuum sealed bag and 1 week after opened. Please keep unused parts in vacuum sealed bags For more info like hadnling and sodlering profile, go to: https://www.johansontechnology.com/index.php/silverleads-profile Part Number Explanation Bulk Suffix = S e.g. 2450BP15Q0100S T&R Suffix = E e.g. 2450BP15Q0100E Termination Style Ag/Pt Suffix = None e.g. 2450BP15Q0100(S or E) Evaluation Board 50Ω SMA Suffix = EBSMA e.g. 2450BP15Q0100-EBSMA Packaging Style P/N Suffix Mechanical Dimensions In Terminal Configuration mm L 0.079 ± 0.006 2.00 ± 0.15 W 0.049 ± 0.004 1.25 ± 0.10 T 0.028 0.70 max. max. a 0.037 ± 0.004 0.95 ± 0.10 b 0.011 ± 0.004 0.275 ± 0.10 c 0.024 ± 0.004 0.60 ± 0.10 d 0.010 ± 0.002 0.25 ± 0.05 d c b W a No. Function 1 IN/OUT 2 GND 3 IN/OUT L T L Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 2.0 2020 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.4GHz High Rejection BPF with LGA-type terminations for reduced effective footprint, EIA 0805 P/N 2450BP15Q0100 Detail Specification: 9/22/2020 Page 2 of 4 Mounting Pad Dimensions Units in mm 0.275 Solder Resist 0.25 Land GND Via (φ 0.35) 0.95 * * *Transmission line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness. 0.60 Measurement Schematic Port 1 Port 2 Network Analyzer (50Ω) Port 1: Filter IN/OUT Port 2: Filter IN/OUT (50Ω) I/O I/O GND Reference Plane Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 2.0 2020 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.4GHz High Rejection BPF with LGA-type terminations for reduced effective footprint, EIA 0805 P/N 2450BP15Q0100 Detail Specification: 9/22/2020 Page 3 of 4 Typical Electrical Characteristics (T=25°C) dB(S(2,2)) dB(S(1,1)) dB(S(2,1)) Insertion Loss & Return loss 0 -10 -20 -30 -40 -50 -60 -70 0 1 2 3 4 5 6 7 8 9 freq, GHz Representative Schematic 1. 8 C C1 C= Pin1 Pin3 Port P1 Num=1 C C4 C= L L1 L= R= C C2 C= C C5 C= L L2 L= R= C C3 C= C C6 C= L L3 L= R= Port P2 Num=2 Pin2 Note: If the designer needs to block DC signals a 10-12pF low loss cap is recommended. The following p/n's are recommended: 250R05L100JV4T 500R07S100JV4T 250R05L110JV4T 500R07S110JV4T 250R05L120JV4T 500R07S120JV4T https://www.johansontechnology.com/high-q-multi-layer-capacitors Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 2.0 2020 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.4GHz High Rejection BPF with LGA-type terminations for reduced effective footprint, EIA 0805 P/N 2450BP15Q0100 Detail Specification: 9/22/2020 Page 4 of 4 Application Notes, Layout Files, and more https://www.johansontechnology.com/band-pass-filters Packaging information https://www.johansontechnology.com/tape-reel-packaging Soldering Information https://www.johansontechnology.com/ipcsoldering-profile MSL Info https://www.johansontechnology.com/msl-rating Recommended Storage Condition and Max Shelf Life https://www.johansontechnology.com/recommended-storage-conditions RoHS Compliance https://www.johansontechnology.com/rohs-compliance Antenna layout and tuning techniques https://www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services https://www.johansontechnology.com/ipc-antenna-services Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver. 2.0 2020 Johanson Technology, Inc. All Rights Reserved