2450DP15B5512

"High Frequency Ceramic Solutions" 2450 / 5512 MHz Diplexer Detail Specification: 07/21/03 P/N 2450DP15B5512 Page 1 of 2 General Specifications Part Number Frequency (MHz) Attenuation Low Band Attenuation High Band Pass-band Return Loss 0.7 dB max. 15 dB min. 9.5 dB min. 20 dB min. 0.9 dB max. 9.5 dB min. 2450DP15B5512 2400-2500 5150-5875 Input Power Impedance Operating Temp. Reel Quanity 3 Watts max. 50 Ω -40 to +85°C 4,000 Terminal Configuration No. Function GND GND GND GND GND 1 Mechanical Dimensions In L 0.079 ± 0.004 W 0.049 ± 0.004 a T 0.033 ± 0.004 0.012 ± 0.004 mm 2.00 ± 0.10 1.25 ± 0.10 0.85 ± 0.10 0.30 ± 0.10 0.20 ± 0.10 0.30 +0.1/-0.2 0.35 ± 0.10 0.65 ± 0.05 Unit : mm L a p a c W 2 Common Port (P1) 3 5 6 7 4 Low Freq. Port (P3) b 0.008 ± 0.004 c 0.012 +.004/-.008 g 0.014 ± 0.004 p 0.026 ± 0.002 8 High Freq. Port (P2) T g b Mounting Considerations Mount these devices with brown mark facing up. Line width should be designed to provide 50Ω impedance matching characteristics. Units: mm 2.80 * Solder Resist 0.35 1.65 * 0.30 Land Through-hole ( 0.35) * 0.35 1.0 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 931 Via Alondra • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2003 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2450 / 5512 MHz Diplexer Detail Specification: 07/21/03 P/N 2450DP15B5512 Page 2 of 2 Typical Electrical Performance ) ) ) Attenuation ) ) ) ) 0 ) ) -10 d B(S (3 ,1)) d B(S (2 ,1)) -20 -30 -40 -50 1 2 3 ) ) 4 5 6 freq, GHz ) ) Return Loss 0 ) -10 ) ) dB(S(3,3)) dB(S(2,2)) dB(S(1,1)) -20 -30 -40 -50 1 2 3 ) 4 5 6 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 931 Via Alondra • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2003 Johanson Technology, Inc. All Rights Reserved