250R05L0R6AV4T

MULTI-LAYER HIGH-Q CAPACITORS These lines of multilayer capacitors have been developed for High-Q and microwave applications. • The S-Series (R07S, R14S, R15S) capacitors give an ultrahigh Q performance, and exhibit NP0 temperature characteristics. • The L-Series (R05L) capacitors give mid-high Q performance, and exhibit NP0 temperature characteristics. • The E-Series (S42E, S48E, S58E) capacitors give excellent high-Q performance from HF to Microwave frequencies. Typical uses are high voltage, high current applications. These are offered in various terminations styles. • RoHS compliance is standard for all unleaded parts (see termination options box). • Automotive versions (AEC-Q200) of R05L, R07S, R14S, R15S, and S42E series are available on request HOW TO ORDER 252 S48 WVDC2 CASE SIZE R05 (0201) R07 (0402) R14 (0603) R15 (0805) S42 (1111) S48 (2525) S58 (3838) 250 = 25 V 500 = 50V 201 = 200 V 251 = 250 V 501 = 500 V 102 = 1000 V 152 = 1500 V 252 = 2500 V 362 = 3600 V 722 = 7200 V Part Number written: 252S48E470KV4E E 470 K CAPACITANCE (pF) 1st two digits are significant; third digit denotes number of zeros, R = decimal. 100 = 10 pF 101 = 100 pF DIELECTRIC S = Ultra High Q NPO L = High Q NPO E = Ultra High Q NPO, High Voltage, High Power G = Fully Oriented, Ultra High-Q NPO TOLERANCE < 10pF A = ± 0.05 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF ≥ 10pF F = ±1 % G = ±2% J = ±5% K = ± 10% For tolerance availability, see chart. V TERMINATION Nickel Barrier V = Ni/Sn (Green) T = Ni/SnPb G = Ni/Au (Green) Non-Mag1 U = Cu/Sn (Green) C = Cu/SnPb Leaded (All Non1 Mag) 1 = Microstrip 2 = Axial Ribbon 3 = Axial Wire 4 = Radial Ribbon 5 = Radial Wire MARKING 3 = Cap Code & Tolerance 4 = No Marking 6 = EIA Code (Marking option is only available 4 E PACKAGING S = Bulk W = Waffle Pack 0201 - 0603 Y = Paper 5” Reel T = Paper 7” Reel R1 = Paper 13” Reel J1 = Paper 5” Reel - -AEC QUALIFICATION AEC-Q200 qualification 3 (optional) Horizontally Oriented Electrodes 1 N = Paper 5” Reel - Vertically Oriented Electrodes 1 L = Paper 7” Reel - Horizontally Oriented Electrodes 1 V = Paper 7” Reel - Vertically Oriented Electrodes 0805 - 3838 Z = Embossed 5” Reel E = Embossed 7” Reel U1 = Embossed 13” Reel M1 = Embossed 5” Reel Horizontally Oriented Electrodes 1 Q = Embossed 5” Reel - Vertically Oriented Electrodes 1 G = Embossed 7” Reel - Horizontally Oriented Electrodes 1 P = Embossed 7” Reel - Vertically Oriented Electrodes Tape specifications conform to EIA RS481 on 0805 and larger case sizes) 1 - Not available for all MLCC - Call factory for info. - WVDC - Working Voltage DC. 3 -Qualification required for automotive application, Not available for all series - Call factory for info. 2 www.johansontechnology.com 7 LOW ESR / HIGH-Q CAPACITOR SELECTION CHART RF Power Applications EIA Size 0201 (R05) Cap. Value NPO (R05L) 0402 (R07S) 0603 (R14S) 0805 (R15S) 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/250 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50 V 50 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 0805 (R15L) 1111 (S42E) 2525 (S48E) 3838 (S58E) Capacitance pF 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 Code 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 330 A B C D A** B C D F G J K 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V Consult factory for Non-Standard values. **A tolerance only available for R07S (0402) and R14S(0603) caps 8 www.johansontechnology.com 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V LOW ESR / HIGH-Q CAPACITOR SELECTION CHART RF Power Applications EIA Size 0201 (R05) Cap. Value Capacitance pF 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1200 1500 1800 2200 2700 3300 3900 4700 5100 10000 Code 360 390 430 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 301 331 361 391 431 471 511 561 621 681 751 821 911 102 122 152 182 222 272 332 392 472 512 103 NPO (R05L) 0402 (R07S) 0603 (R14S) 0805 (R15S) 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 0805 (R15L) 1111 (S42E) 2525 (S48E) 3838 (S58E) Tolerance F G 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V 25/50 V J K G J K 200/500V 200/500V 200/500V 200/500V 200/500V 200/500V 200/500V 500V 100V 100V 100V 50V 50V 50V 50V 50V 50V 50V 50V 50V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 300V 300V 300V 300V 300V 300V 300V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 200V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1500V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 600V 600V 600V 600V 600V 500V 500V 500V 500V 500V 500V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 1500V 1500V 1500V 1500V 1500V 1500V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 500V 500V 300V 300V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 1000V 1000V 1000V 1000V 1000V 1000V 500V 500V 500V 500V 500V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V Consult factory for Non-Standard values. www.johansontechnology.com 9 DIELECTRIC CHARACTERISTICS NPO TEMPERATURE COEFFICIENT: 0 ± 30ppm /°C, -55 to 125°C QUALITY FACTOR / DF: Q >1,000 @ 1KHz (C>1,000pF), Typical 10,000 (C100 GΩ @ 25°C,WVDC1; 125°C IR is 10% of 25°C rating TEST PARAMETERS: 1MHz ±50kHz, 1.0±0.2VRMS for capacitance values ≤ 1,000pF 1kHZ ±50Hz, 1.0±0.2VRMS for capacitance values > 1,000pF 500 V ≤ 2.5 X WVDC1 Min., 25°C, 50 mA max DIELECTRIC STRENGTH: 1000 V ≤ 1.5 X WVDC1 Min., 25°C, 50 mA max > 1500 = 1 X WVDC1 Min., 25°C, 50 mA max AVAILABLE CAPACITANCE: Size 0201: Size 0402: Size 0603: Size 0805: 0.2 - 100 pF 0.2 - 33 pF 0.2 - 100 pF 0.3 - 220 pF Size 1111: 0.2 - 1000 pF Size 2525: 1.0 - 2700 pF Size 3838: 1.0 - 5100 pF *ON REQUEST, WE CAN EXTEND THE HIGHEST TEMPERATURE TO +150° C FOR ANY OF OUR HIGH-Q SERIES MECHANICAL & ENVIRONMENTAL CHARACTERISTICS SPECIFICATION SOLDERABILITY: RESISTANCE TO SOLDERING HEAT: TERMINAL ADHESION: PCB DEFLECTION: LIFE TEST: THERMAL CYCLE: HUMIDITY, STEADY STATE: HUMIDITY, LOW VOLTAGE: VIBRATION: Solder coverage ≥ 90% of metalized areas No termination degradation No mechanical damage Capacitance change: ±2.5% or 0.25pF Q>500 I.R. >10 G Ohms DWV2: 2.5 x WVDC1 Termination should not pull off. Ceramic should remain undamaged. No mechanical damage. Capacitance change: 5% or 0.5pF whichever is greater. MIL-STD-202, Method 108l No mechanical damage Capacitance change: ±3.0% or 0.3 pF Q>500 I.R. >1 G Ohms DWV2: 2.5 x WVDC1 No mechanical damage. Capacitance change: ±2.5% or 0.25pF Q>2000 I.R. >10 G Ohms DWV2: 2.5 x WVDC1 No mechanical damage. Capacitance change: ±5.0% or 0.50pF max. Q>300 I.R. ≥ 1 G-Ohm DWV2: 2.5 x WVDC1 No mechanical damage. Capacitance change: ±5.0% or 0.50pF max. Q>300 I.R. = 1 G-Ohm min. DWV2: 2.5 x WVDC1 No mechanical damage. Capacitance change: ±2.5% or 0.25pF Q>1000 I.R. ≥ 10 G-Ohm DWV2: 2.5 x WVDC1 1 TEST PARAMETERS Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux then dip in Sn62 solder @ 240°±5°C for 5±1 sec Preheat device to 80°-100°C for 60 sec. followed by 150°-180°C for 60 sec. Dip in 260°±5°C solder for 10±1 sec. Measure after 24±2 hour cooling period Linear pull force3 exerted on axial leads soldered to each terminal. Glass epoxy PCB: 2 mm deflection Applied voltage: 200% of WVDC1 for capacitors rated at 500 volts DC or less. 100% of WVDC1 for capacitors rated at 1250 volts DC or less. Temperature: 125°±3°C Test time: 1000+48-0 hours 5 cycles of: 30±3 minutes @ -55°+0/-3°C, 2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C, 2-3 min. @ 25°C Measure after 24±2 hour cooling period Relative humidity: 90-95% Temperature: 40°±2°C Test time: 500 +12/-0 Hours Measure after 24±2 hour cooling period Applied voltage: 1.5 VDC, 50 mA max. Relative humidity: 85±2% Temperature: 40°±2°C Test time: 240 +12/-0 Hours Measure after 24±2 hour cooling period Cycle performed for 2 hours in each of three perpendicular directions Frequency range 10Hz to 55 Hz to 10 Hz traversed in 1 minute. Harmonic motion amplitude: 1.5mm - WVDC - Working Voltage DC. - DWV - Dielectric Withstanding Voltage. - 0402 ≥ 2.0lbs, 0603 ≥ 4.0lbs (min). AEC-Q200: Qualification required for automotive application - Not available for all series - Call factory for info. 2 3 10 www.johansontechnology.com MECHANICAL CHARACTERISTICS Size Units EIA 0201 Metric (0603) EIA 0402 Metric (1005) EIA 0603 Metric (1608) EIA 0805 Metric (2012) In Length Width Thickness End Band .024 ±.001 .012 ±.001 .012 ±.001 .008 Max. (0.20 Max.) (0.60 ±0.03) (0.30 ±0.03) (0.30 ±0.03) In .040 ±.004 .020 ±.004 .020 ±.004 .010 ±.006 mm (1.02 ±0.1) (0.51 ±0.1) (0.51 ±0.1) (0.25 ±.15) .062 ±.006 .032 ±.006 .030 +.005/-.003 .014 ±.006 (1.57 ±0.15) (0.81 ±0.15) (0.76 +.13-.08) (0.35 ±.15) mm In mm In mm .080 ±.008 .050 ±.008 .040 ±.006 .020 ±.010 (2.03 ±0.20) (1.27 ±0.20) (1.02 ±.15) (0.50 ±.25) HORIZONTAL AND VERTICLE ORIENTED CAPACITORS Horizontal Electrode Orientation Vertical Electrode Orientation APPLICATIONS & FEATURES Size: Performance: Termination: Applications: EIA 0201, 0805, 1111 SRF’s up to 20 GHz, Ultra High Q, Tight tolerance, Ultralow ESR Ni/Au, Ni/Sn, Ni/SnPb High Frequency Wireless Communications, Portable Wireless Products, Battery Powered Products RoHS Compliant BENIFITS OF USING ORIENTED CAPACITORS • • • • • Consistent Orientation - Improved repeatability of production circuits. Consistent Orientation - More consistent filter performance. Vertical Orientation - The elimination of parallel frequencies. Vertical Orinetation - Lower inductance for a given capacitor. Horizontal Orientation - Lower coupling between adjacent capacitors. www.johansontechnology.com 11 E-SERIES TERMINATIONS AND LEADS CHIP DIMENSIONS Size Termination S42E V,T U,C S48E S58E Units In mm In mm In mm L Tol 0.110 2.79 0.230 5.84 0.380 9.65 +.020 +0.51 +.025 +0.63 +.015 +0.38 -.010 -0.25 -.010 -0.25 -.010 -0.25 For all E-Series Models: W Tol T E/B Tol 0.110 2.79 0.250 6.35 0.380 9.65 +/- .015 +/- 0.38 +/- .015 +/- 0.38 +/- .010 +/- 0.25 0.102 Max. 2.59 Max. 0.150 Max. 3.81 Max. 0.170 Max. 4.32 Max. 0.015 Typ. 0.38 Typ. 0.025 Typ. 0.63 Typ. 0.025 Typ. 0.63 Typ. +/- 0.008 +/- 0.20 OPERATING TEMP. : INSULATION RESISTANCE: TEMPERATURE COEFFICIENT: -55 to +150°C >10G Ω @ 25°C 0 ± 30ppm /°C, -55 to 125°C DISSIPATION FACTOR (TYP.): < 0.05% @ 1 MHz Drawings not to scale S42E Family Termination Codes “V”, “T”, “U”, or “C” S48E and S58E Families Termination Codes “U”, “C” Microstrip Ribbon Leads (Non-Magnetic), Termination Code “1” Axial Ribbon Leads (Non-Magnetic), Termination Code “2” e e W L X E/B X T LL Axial Wire Leads (Non-Magnetic), Termination Code “3” LL LL LL Radial Ribbon Leads (Non-Magnetic), Tere e mination Code “4” LL Radial Wire Leads (Non-Magnetic), Termination Code “5” X LL T LL LL W W LL T LL W X X LL e Lead 1 Size LL(min) X Tol e e-Tol S42E 0.25 6.40 0.394 10.0 0.748 19.00 0.25 6.40 0.394 10.00 0.748 19.00 0.25 6.40 0.394 10.00 0.748 19.00 0.093 2.36 0.217 5.5 0.35 8.90 0.093 2.36 0.217 5.50 0.35 8.90 +/-0.005 +/- 0.13 +/- 0.02 +/- 0.50 +/- 0.02 +/- 0.50 +/-0.005 +/- 0.13 +/- 0.02 +/- 0.50 +/- 0.02 +/- 0.50 0.004 0.102 0.009 0.220 0.010 0.250 0.004 0.102 0.009 0.220 0.010 0.25 +/- 0.002 +/- 0.051 - 0.0019/+ 0.0031 - 0.050/+ 0.080 - 0.0019/+ 0.0039 - 0.050/+ 0.100 +/- 0.002 +/- 0.051 - 0.0019/+ 0.0031 - 0.050/+ 0.080 - 0.0019/+ 0.0039 - 0.050/+ 0.100 S48E S58E S42E 2 S48E S58E S42E 3 S48E S58E 12 e Lead 4 Size LL(min) X Tol e e-Tol S42E 0.352 8.90 0.501 12.70 0.886 22.50 0.25 6.40 0.394 10.00 0.748 19.00 0.093 2.36 0.217 5.50 0.35 8.90 +/-0.005 +/- 0.13 +/- 0.02 +/- 0.50 +/- 0.02 +/- 0.50 0.004 0.102 0.009 0.220 0.010 0.25 +/- 0.002 +/- 0.051 - 0.0019/+ 0.0031 - 0.050/+ 0.080 - 0.0019/+ 0.0039 - 0.050/+ 0.100 S48E S58E S42E 5 S48E S58E 0.020in (0.511) diameter wire www.johansontechnology.com 0.020in (0.511) diameter wire RF CHARACTERISTICS - 0201 R05L SERIES More data at: https://jtisoft.johansontechnology.com Resonant Frequency : 0201/R05L 0201 R05L Resonant frequency Resonant frequency (GHz) 100 SRF 0201 R05L Equivalent Series Resistance (ESR) 300 Typical values of SRF with:  Series mounting  Horizontal orientation  14 mil-thick FR4 substrate 250 ESR (mΩ) 200 10 3.0 pF 10 pF 150 33 pF 100 56 pF 50 1 0 1 10 100 pF Typical values 0 500 100 1000 1500 2000 Freq (MHz) Capacitance value (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. 0201 R05L Q factor 0201 R05L Max Current 10000 Q factor 1000 3.0 pF 10 pF 100 33 pF 56 pF 10 Maximum current (A rms) 3 100 pF 1 0 500 1000 1500 Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 300°C/W  Infinite heatsink  Duty cycle=100% 2.5 2 3 pF 10 pF 1.5 33 pF 1 56 pF 0.5 0 100 pF 0 500 1000 1500 2000 Freq (MHz) 2000 Freq (MHz) RF CHARACTERISTICS - 0402 R07S SERIES More data at: https://jtisoft.johansontechnology.com 10 200 5.6 pF 100 0 0.1 2.2 pF 150 10 pF 15 pF 50 SRF 1 0402 R07S Equivalent Series Resistance (ESR) 250 Typical values of SRF with:  Series mounting  Horizontal orientation  16 mil-thick Rogers 4003 substrate ESR (mΩ) Resonant frequency (GHz) 0402 R07S Series Resonant frequency 1 33 pF Typical values 0 500 10 1000 1500 2000 Freq (MHz) Capacitance value (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. www.johansontechnology.com 13 RF CHARACTERISTICS 0402 R07S SERIES More data at: https://jtisoft.johansontechnology.com 0402 R07S Q factor 10000 5.6 pF 100 10 pF 15 pF 10 Maximum current (A rms) 2.2 pF Q factor Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 120°C/W  Infinite heatsink  Duty cycle=100% 4.5 1000 33 pF 1 0402 R07S Max Current 5 4 3.5 3 33 pF 2.5 15 pF 2 10 pF 1.5 5.6 pF 1 0 Typical values 0 500 1000 2.2 pF 0.5 1500 0 2000 500 Freq (MHz) RF CHARACTERISTICS 0603 R14S SERIES 2000 0603 R14S Equivalent Series Resistance (ESR) Typical values of SRF with:  Series mounting  Horizontal orientation  16 mil-thick Rogers 4003 substrate 280 240 ESR (mΩ) Resonant frequency (GHz) 1500 More data at: https://jtisoft.johansontechnology.com 0603 R14S Series Resonant frequency 100 1000 Freq (MHz) 10 200 2.0 pF 160 4.7 pF 10 pF 120 39 pF 80 SRF 75 pF 40 0 1 0.1 1 10 100 pF Typical values 0 500 1000 1500 2000 Freq (MHz) 100 Capacitance value (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. 0603 R14S Q factor 10000 0603 R14S Max Current 2.0 pF 1000 Q factor 4.7 pF 10 pF 100 39 pF 75 pF 10 1 Typical values 0 500 1000 Freq (MHz) 14 100 pF Maximum current (A rms) 8 6 2000 100 pF 5 75 pF 4 39 pF 3 10 pF 2 4.7 pF 1 2.0 pF 0 1500 Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 60°C/W  Infinite heatsink  Duty cycle=100% 7 0 500 1000 Freq (MHz) www.johansontechnology.com 1500 2000 RF CHARACTERISITCS - 0805 R15S SERIES More data at: https://jtisoft.johansontechnology.com 10 0.3 pF 250 2.0 pF 200 4.7 pF 150 10 pF 39 pF 100 75 pF 100 pF 50 SRF 0 1 0805 R15S Equivalent Series Resistance (ESR) 300 Typical values with:  Series mounting  Horizontal orientation  16 mil-thick Rogers 4003C substrate ESR (mΩ) Resonant frequency (GHz) 0805 R15S Series Resonant frequency 1 10 220 pF Typical values 0 500 1000 1500 2000 Freq (MHz) 100 Capacitance value (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. 0805 R15S Q factor Effective capacitance value: 0805/R15S 1000 0.3 pF 400 2.0 pF 350 Q factor 4.7 pF 10 pF 100 39 pF 75 pF 10 100 pF 220 pF Typical values 1 0 500 1000 1500 Effective Capacitance Value (pF) 10000 300 250 200 100 50 0 2000 Maximum current (A rms) 1 300 MHz 64 MHz 27 MHz 0.1 13 MHz 7 MHz 1 10 400 600 800 1000 1200 1400 1600 1800 2000 Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 40°C/W  Infinite heatsink  Duty cycle=100% 10 128 MHz 0.1 200 0805 R15S Max Current vs. Frequency Maximum current (A rms) Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 40°C/W  Infinite heatsink  Duty cycle=100% 100 MHz 0.01 0 Freq (MHz) 0805 R15S Max Current vs. Cap. Value 10 C(1 MHz) = 220 pF C(1 MHz) = 100 pF C(1 MHz) = 56 pF 150 Freq (MHz) 100 Typical values on a 16 mil RO4003C 8 220 pF 100 pF 75 pF 6 39 pF 10 pF 4 4.7 pF 2.0 pF 2 0 0.3 pF 0 500 100 1000 1500 2000 Freq (MHz) Capacitance value (pF) www.johansontechnology.com 15 RF CHARACTERISTICS - 1111 S24E SERIES More data at: https://jtisoft.johansontechnology.com Typical values with:  Series mounting  Horizontal orientation  60 mil-thick Rogers 4350B substrate 10 1111 S42E Equivalent Series Resistance (ESR) 300 250 1.2 pF 200 ESR (mΩ) Resonant frequency (GHz) 1111 S42E Series Resonant frequency SRF 1 4.7 pF 150 10 pF 100 33 pF 100 pF 50 0.1 0 1 10 100 300 pF Typical values 0 500 1000 1000 1500 2000 Freq (MHz) Capacitance value (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. 1111 S42E Q factor 10000 Effective capacitance value: 1111/S42E S42E Q factor 1.2 pF 4.7 pF 100 10 pF 33 pF 10 1 100 pF 300 pF Typical values 0 500 1000 1500 Effective capacitance value (pF) 0.2 pF 1000 400 Typical values on a 60-mil thick Rogers 4350B substrate 350 300 250 C(1 MHz) = 300pF 200 C(1 MHz) = 100 pF 150 C(1 MHz) = 10 pF 100 50 0 0 2000 500 1000 Freq (MHz) 1111 S42E Max Current vs. Capacitance Value Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 20°C/W  Infinite heatsink  Duty cycle=100% 100 200 MHz 100 MHz 1 40 MHz 15 MHz 0.1 7 MHz 0.01 0.1 1 10 100 Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 20°C/W  Infinite heatsink  Duty cycle=100% 18 10 1000 16 14 300 pF 100 pF 12 33 pF 10 10 pF 8 4.7 pF 6 4 1.2 pF 2 0.2 pF 0 0 500 1000 Freq (MHz) Capacitance value (pF) 16 2000 1111 S42E Max Current vs. Frequency 20 Maximum Current (A rms) Maximum Current (A rms) 1000 1500 Freq (MHz) www.johansontechnology.com 1500 2000 RF CHARACTERISTICS - 2525 S48E SERIES More data at: https://jtisoft.johansontechnology.com 2525 S48E Series Resonant Frequency 10 2525 S48E Equivalent Series Resistance (ESR) 140 Typical values of SRF when measured on a 8720C VNA using a shunt-through fixture 120 ESR (mΩ) Frequency (GHz) 100 1 10 pF 80 22 pF 60 33 pF 40 130 pF 470 pF 20 SRF 0.1 1 0 10 100 Typical values 0 50 100 150 200 250 300 Freq (MHz) 1000 Capacitance (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. 2525 S48E Q factor 10000 16 10 pF 22 pF 100 33 pF 130 pF 10 470 pF 50 100 150 14 12 470 pF 10 130 pF 8 33 pF 6 22 pF 4 200 250 300 10 pF 2 0 Typical values 0 Imax (A rms) Q factor Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 15°C/W  Infinite heatsink  Duty cycle=100% 18 1000 1 2525 S48E Max Current vs. Frequency 20 0 50 100 Freq (MHz) www.johansontechnology.com 150 200 250 300 Freq (MHz) 17 RF CHARACTERISTICS - 3838 S58E SERIES 3838 S58E Series Resonant frequency 10 3838 S58E Equivalent Series Resistance (ESR) 180 Typical values of SRF when measured on a 8720C VNA using a shunt-through fixture 160 120 ESR (mΩ) Frequency (GHz) 140 1 0.1 0.01 100 10 pF 80 47 pF 60 180 pF 40 1000 pF 20 SRF 1 0 10 100 1000 Typical values 0 50 100 150 200 250 300 Freq (MHz) Capacitance (pF) The Series Resonant Frequency is highly dependent on the substrate, pad dimensions, and measurement method. The above chart is for reference only. 3838 S58E Q factor 3838 S58E Max Current vs. Frequency Q factor 1000 10 pF 100 47 pF 180 pF 10 1 1000 pF 50 100 150 200 250 300 Estimated maximum current based on  Ambient temperature = 65 °C  Thermal resistance of DUT on substrate = 12°C/W  Infinite heatsink  Duty cycle=100% 20 15 10 pF 47 pF 10 180 pF 1000 pF 5 0 Typical values 0 Maximum current (A rms) 10000 0 50 100 Freq (MHz) 18 www.johansontechnology.com 150 Freq (MHz) 200 250 300