4400BL15A0100E

High Frequency Ceramic Solutions 2.8 - 6.0GHz Wideband Ceramic Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: P/N 4400BL15A0100 4/28/2020 Page 1 of 4 General Specifications Part Number 4400BL15A0100 Frequency (GHz) 2.8 - 6.0 Unbalanced Impedance 50 Ω Balanced Impedance 100 Ω Insertion Loss 1.5 dB max. 9.5 dB min. Return Loss Phase Difference 180 ± 12 deg. Amplitude Difference 1.8 dB max. CMRR (dB) 15 dB min. Power Capacity (W) 3 max. (CW) Reel Quantity Recommended Storage Conditions of unused product on T&R 4,000 pcs Operating Temperature -40 to +85°C +5 to +35°C Humidity 45~75% RH 18 months max. You can download measured s-parameters of this component at:https://www.johansontechnology.com/baluns Part Number Explanation Packing Style P/N Suffix Termination style Evaluation Board Bulk Suffix = S E.g. 4400BL15A0100S T&R Suffix = E E.g. 4400BL15A0100E 100% Tin Suffix = None E.g. 4400BL15A0100 (E or S) 4400BL15A0100-EB1SMA (3 female SMA connectors) Mechanical Dimensions In Terminal Configuration mm 1 Unbalanced Port L 0.079 ± 0.004 2.00 ± 0.10 2 GND or DC feed + RF GND W 0.049 ± 0.004 1.25 ± 0.10 3 Balanced Port T 0.037 ± 0.004 0.95 ± 0.10 4 Balanced Port a 0.012 ± 0.004 0.30 ± 0.10 5 GND b 0.008 ± 0.004 0.20 ± 0.10 6 NC c 0.012 +0.004/0.008 0.30 +0.1/-0.2 g 0.014 ± 0.004 0.35 ± 0.10 p 0.026 ± 0.002 0.65 ± 0.05 W c L p a       T g b Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2020 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.8 - 6.0GHz Wideband Ceramic Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: P/N 4400BL15A0100 4/28/2020 Page 2 of 4 Mounting Considerations Mount these devices with colored mark facing up. * Line width should be designed to provide 50ohm impedance matching characteristics. * Solder 0.35 * Land * 1.0 0.8 Through-hole (Ф0.3) * Line width should be designed to match  50W characteristic impedance, depending on  0.30 * Need our help laying this out for you? Need the layout file? Send us a message at: https://www.johansontechnology.com/ask-a-question Measuring Diagram Port1(50) Network Analyzer Port 2* GND GND Port 3* Port 1:Unbalanced Port Ports 2 and 3: Balanced Port Port 4: GND or DC feed + RF GND IL=Sds21 RL=Sss11 Amp_balance = dB(S(2,1)/S(3,1)) Phase_balance = Phase(S(2,1)/S(3,1)) *Impedance for ports 2 and 3 = Balanced Impedance/2 (Port 4) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2020 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.8 - 6.0GHz Wideband Ceramic Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: P/N 4400BL15A0100 4/28/2020 Page 3 of 4 Typical Electrical Characteristics (T=25°C) Insertion and Return Loss CMRR dB(Sss11) dB(Sds21) dB(Sdd22) 0 -10 -20 -30 0.5 1.5 2.5 Amplitude and Phase Balance 3.5 4.5 5.5 freq, GHz 6.5 7.5 200 6 150 100 2 50 0 0 -50 -2 Phase_diff Amp_diff 4 -100 -4 -6 0.5 8.5 -150 1.5 2.5 3.5 4.5 5.5 freq, GHz 6.5 7.5 -200 8.5 Would you like the s-parameter files? Please contact us at: https://www.johansontechnology.com/ask-a-question Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2020 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2.8 - 6.0GHz Wideband Ceramic Balun, 1:2 Impedance Ratio, EIA 0805 Detail Specification: P/N 4400BL15A0100 4/28/2020 Page 4 of 4 More Baluns https://www.johansontechnology.com/baluns RoHS Compliance https://www.johansontechnology.com/rohs-compliance Packaging information https://www.johansontechnology.com/tape-reel-packaging Soldering Information (i.e. recommended profile) https://www.johansontechnology.com/ipcsoldering-profile Layout Files, s-parameters and any other technical questions https://www.johansontechnology.com/ask-a-question MSL Info https://www.johansontechnology.com/msl-rating Recommneded Storage Condition and Max Shelf Life https://www.johansontechnology.com/recommended-storage-conditions Antenna layout and tuning techniques https://www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services https://www.johansontechnology.com/ipc-antenna-services Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2020 Johanson Technology, Inc. All Rights Reserved