MULTI-LAYER HIGH-Q CAPACITORS
These lines of multilayer capacitors have been developed for
High-Q and microwave applications.
• The S-Series (R03S, R07S, R14S, R15S) capacitors give an
ultra-high Q performance, and exhibit NP0 temperature characteristics.
• The L-Series (R05L) capacitors give mid-high Q performance,
and exhibit NP0 temperature characteristics.
• The E-Series (S42E, S48E, S58E) capacitors give excellent
high-Q performance from HF to Microwave frequencies.
Typical uses are high voltage, high current applications. They
are offered in chip (Ni barrier or Non-Magnetic Pt.-Ag) or in
Non-Magnetic leaded form.
• The W-Series (R05W) capacitors offer a large capacitance
value in an ultra-small 0201 package size. These exhibit a X7R
temperature characteristic.
• RoHS compliance is standard for all unleaded parts (see
termination options box).
HOW TO ORDER
252
S48
VOLTAGE (DC)
CASE SIZE
CAPACITANCE (pF)
R03 (01005)
R05 (0201)
R07 (0402)
R14 (0603)
R15 (0805)
S42 (1111)
S48 (2525)
S58 (3838)
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
6R3 = 6.3 V
101 = 100 V
160 = 16 V
250 = 25 V
500 = 50 V
201 = 200 V
251 = 250 V
301 = 300 V
501 = 500 V
102 = 1000 V
152 = 1500 V
202 = 2000 V
252 = 2500 V
362 = 3600 V
502 = 5000 V
722 = 7200 V
E
470
100 = 10 pF
101 = 100 pF
DIELECTRIC
S = Ultra High Q NPO
L = High Q NPO
E = Ultra High Q NPO,
High Voltage, High Power,
*T = High Temp (175C)
Ultra High Q NPO
W= X7R
V
K
TOLERANCE
A = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F = ±1 %
G = ±2%
J = ±5%
K = ± 10%
For tolerance
availability, see chart.
4
TERMINATION
Nickel Barrier
V = Ni/Sn (Green)
T = Ni/SnPb
G = Ni/Au (Green)
Non-Mag*
U = Cu/Sn (Green)
C = Cu/SnPb
Leaded (All Non-Mag)*
1 = Microstrip
2 = Axial Ribbon
3 = Axial Wire
4 = Radial Ribbon
5 = Radial Wire
Part Number written: 252S48E470KV4E
MARKING
3 = Cap Code
& Tolerance
4 = No Marking
6 = EIA Code
(Marking on
0805 and
larger only)
E
PACKAGING
S = Bulk
W = Waffle Pack
01005 - 0603
Y = Paper 5” Reel
T = Paper 7” Reel
*R = Paper 13” Reel
*J = Paper 5” Reel Horizontally Oriented Electrodes
*N = Paper 5” Reel Vertically Oriented Electrodes
*L = Paper 7” Reel Horizontally Oriented Electrodes
*V = Paper 7” Reel Vertically Oriented Electrodes
0805 - 3838
Z = Embossed 5” Reel
E = Embossed 7” Reel
*U = Embossed 13” Reel
*M = Embossed 5” Reel Horizontally Oriented Electrodes
*Q = Embossed 5” Reel Vertically Oriented Electrodes
*G = Embossed 7” Reel Horizontally Oriented Electrodes
*P = Embossed 7” Reel Vertically Oriented Electrodes
Tape specifications
conform to EIA RS481
“*” - Not available for all MLCC - Call factory for info.
www.johansontechnology.com
7
low eSR / HigH-Q CapaCiToR SeleCTion CHaRT
Miniature Size - Portable Electronics
RF Power Applications
EIA Size
01005
(R03S)
Cap. Value
0201 (R05)
NPO
(R05L)
X7R*
(R05W)
0402 0603 0805 0805
(R07S) (R14S) (R15S) (R15E)
Capacitance
pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
Code
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
330
2525
(S48E)
3838
(S58E)
Voltage
A
B
C
D
A**
B
C
D
F
G
J
K
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50/200 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
50 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
* The R05W parts, which are X7R, can only be provided with “K” or “M” tolerance.
**A tolerance only available for R07S (0402) and R14S(0603) caps
8
1111
(S42E)
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
Consult factory for Non-Standard values.
www.johansontechnology.com
low eSR / HigH-Q CapaCiToR SeleCTion CHaRT
Miniature Size - Portable Electronics
RF Power Applications
EIA Size
01005
(R03S)
Cap. Value
Capacitance
pF
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1200
1500
1800
2200
2700
3300
3900
4700
5100
10000
Code
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
122
152
182
222
272
332
392
472
512
103
0201 (R05)
NPO
(R05L)
X7R*
(R05W)
0402 0603 0805 0805
(R07S) (R14S) (R15S) (R15E)
Tolerance
F
G
2525
(S48E)
3838
(S58E)
Voltage
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
25 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
16 V
J
K
16 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
250 V
16 V
16 V
G
16 V
J
10 V
K
1111
(S42E)
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
300V
300V
300V
300V
300V
300V
300V
200V
200V
200V
200V
200V
200V
200V
200V
200V
100V
100V
100V
50V
50V
50V
50V
50V
10 V
10 V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
1500V
1500V
1500V
1500V
1500V
1500V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
1000V
500V
500V
300V
300V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
3600V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
2500V
1000V
1000V
1000V
1000V
1000V
1000V
500V
500V
500V
500V
500V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
7200V
6.3 V
* The R05W parts, which are X7R, can only be provided with “K” and “M” tolerance.
Consult factory for Non-Standard values.
www.johansontechnology.com
9
DieleCTRiC CHaRaCTeRiSTiCS
npo
x7R
TEMPERATURE COEFFICIENT:
0 ± 30ppm /°C, -55 to 125°C
± 15%, -55 to 125°C
QUALITY FACTOR / DF:
Q >1,000 @ 1 MHz, Typical 10,000
16VDC DF≤ 3.5% @ 1 KHz, 25°C
10VDC DF≤ 5.0% @ 1 KHz, 25°C
INSULATION RESISTANCE:
>100 GΩ @ 25°C,WVDC;
125°C IR is 10% of 25°C rating
DIELECTRIC STRENGTH:
500 V ≤ 2.5 X WVDC Min., 25°C, 50 mA max
>500 ΩF* or 10 GΩ* @ 25°C,WVDC;
125°C IR is 10% of 25°C rating
* whichever is less
2.5 X WVDC Min., 25°C, 50 mA max
1000 V ≤ 1.5 X WVDC Min., 25°C, 50 mA max
> 1500 = 1 X WVDC Min., 25°C, 50 mA max
1KHz ±50Hz, 1.0±0.2 VRMS, 25°C
100 - 10,000 pF
1MHz ±50kHz, 1.0±0.2 VRMS, 25°C
TEST PARAMETERS::
AVAILABLE CAPACITANCE:
Size 01005:
Size 0201:
Size 0402:
Size 0603:
0.2 - 10 pF
0.2 - 100 pF
0.2 - 33 pF
0.2 - 100 pF
Size 0805:
Size 1111:
Size 2525:
Size 3838:
0.3 - 220 pF
0.2 - 1000 pF
1.0 - 2700 pF
1.0 - 5100 pF
MECHANICAL & ENVIRONMENTAL CHARACTERISTICS
SPECIFICATION
SOLDERABILITY:
RESISTANCE TO
SOLDERING HEAT:
TERMINAL
ADHESION:
PCB DEFLECTION:
LIFE TEST:
THERMAL CYCLE:
HUMIDITY,
STEADY STATE:
HUMIDITY,
LOW VOLTAGE:
VIBRATION:
10
Solder coverage ≥ 90% of metalized areas
No termination degradation
No mechanical damage
Capacitance change: ±2.5% or 0.25pF
Q>500 I.R. >10 G Ohms
Breakdown voltage: 2.5 x WVDC
Termination should not pull off.
Ceramic should remain undamaged.
No mechanical damage.
Capacitance change: 2% or 0.5pF Max
MIL-STD-202, Method 108l
No mechanical damage
Capacitance change: ±3.0% or 0.3 pF
Q>500 I.R. >1 G Ohms
Breakdown voltage: 2.5 x WVDC
No mechanical damage.
Capacitance change: ±2.5% or 0.25pF
Q>2000 I.R. >10 G Ohms
Breakdown voltage: 2.5 x WVDC
No mechanical damage.
Capacitance change: ±5.0% or 0.50pF max.
Q>300 I.R. ≥ 1 G-Ohm
Breakdown voltage: 2.5 x WVDC
No mechanical damage.
Capacitance change: ±5.0% or 0.50pF max.
Q>300 I.R. = 1 G-Ohm min.
Breakdown voltage: 2.5 x WVDC
No mechanical damage.
Capacitance change: ±2.5% or 0.25pF
Q>1000 I.R. ≥ 10 G-Ohm
Breakdown voltage: 2.5 x WVDC
TEST PARAMETERS
Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux
then dip in Sn62 solder @ 240°±5°C for 5±1 sec
Preheat device to 80°-100°C for 60 sec.
followed by 150°-180°C for 60 sec.
Dip in 260°±5°C solder for 10±1 sec.
Measure after 24±2 hour cooling period
Linear pull force* exerted on axial leads soldered to each terminal.
*0402 ≥ 2.0lbs, 0603 ≥ 2.0lbs (min.)
Glass epoxy PCB: 0.5 mm deflection
Applied voltage: 120% of WDVC for capacitors rated at 500 volts DC or less.
100% of WDVC for capacitors rated at 1250 volts DC or less.
Temperature: 125°±3°C
Test time: 1000+48-0 hours
5 cycles of: 30±3 minutes @ -55°+0/-3°C,
2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C,
2-3 min. @ 25°C
Measure after 24±2 hour cooling period
Relative humidity: 90-95%
Temperature: 40°±2°C
Test time: 500 +12/-0 Hours
Measure after 24±2 hour cooling period
Applied voltage: 1.5 VDC, 50 mA max.
Relative humidity: 85±2% Temperature: 40°±2°C
Test time: 240 +12/-0 Hours
Measure after 24±2 hour cooling period
Cycle performed for 2 hours in each of three perpendicular directions
Frequency range 10Hz to 55 Hz to 10 Hz traversed
in 1 minute. Harmonic motion amplitude: 1.5mm
www.johansontechnology.com
MECHANICAL CHARACTERISTICS
Size
Units
EIA 01005
Metric (0402)
EIA 0201
Metric (0603)
EIA 0402
Metric (1005)
EIA 0603
Metric (1608)
EIA 0805
Metric (2012)
In
mm
In
mm
Length
.016 ±.001
Width
Thickness
End Band
.008 ±.001
.008 ±.001
.006 Max.
(0.40 ±0.03) (0.20 ±0.03)
(0.20 ±0.03)
(0.15 Max.)
.024 ±.001
.012 ±.001
.012 ±.001
.008 Max.
(0.60 ±0.03) (0.30 ±0.03)
(0.30 ±0.03)
(0.20 Max.)
In
.040 ±.004
.020 ±.004
.020 ±.004
.010 ±.006
mm
(1.02 ±0.1)
(0.51 ±0.1)
(0.51 ±0.1)
(0.25 ±.15)
.062 ±.006
.032 ±.006 .030 +.005/-.003
.014 ±.006
In
mm
In
mm
(1.57 ±0.15) (0.81 ±0.15)
(0.76 +.13-.08)
(0.35 ±.15)
.050 ±.008
.040 ±.006
.020 ±.010
(2.03 ±0.20) (1.27 ±0.20)
(1.02 ±.15)
(0.50 ±.25)
.080 ±.008
HoRizonTal anD VeRTiCle oRienTeD CapaCiToRS
Horizontal Electrode Orientation
Vertical Electrode Orientation
appliCaTionS & FeaTuReS
Size:
Performance:
Termination:
Applications:
EIA 0201, 0402
SRF’s up to 20 GHz, Ultra High Q, Tight tolerance, Ultralow ESR
Ni/Au, Ni/Sn, Ni/SnPb
High Frequency Wireless Communications, Portable Wireless Products, Battery Powered
Products
RoHS Compliant
BeniFiTS oF uSing oRienTeD CapaCiToRS
•
•
•
•
•
Consistent Orientation - Improved repeatability of production circuits.
Consistent Orientation - More consistent filter performance.
Vertical Orientation - The elimination of parallel frequencies.
Vertical Orinetation - Lower inductance for a given capacitor.
Horizontal Orientation - Lower coupling between adjacent capacitors.
www.johansontechnology.com
11
e-SeRieS TeRminaTionS anD leaDS
Termination
Size
S42E
V,T
S48E
U,C
S58E
Units
L
Tol
W
0.110 +.020 -.010 0.110
In
mm 2.79 +0.51 -0.25 2.79
0.230 +.025 -.010 0.250
In
mm 5.84 +0.63 -0.25 6.35
0.380 +.015 -.010 0.380
In
mm 9.65 +0.38 -0.25 9.65
Tol
T
E/B
For all E-Series Models:
Tol
+/- .015 0.102 Max. 0.015 Typ. +/- 0.008
+/- 0.38 2.59 Max. 0.38 Typ. +/- 0.20
+/- .015 0.150 Max. 0.025 Typ.
+/- 0.38 3.81 Max. 0.63 Typ.
+/- .010 0.170 Max. 0.025 Typ.
+/- 0.25 4.32 Max. 0.63 Typ.
Unleaded Termination Codes “V” (Ni/Sn),
“T” (Ni/SnPb), “U” (Cu/Sn non-mag), “C”
(Cu/SnPb non-mag)
OPERATING TEMP. :
INSULATION RESISTANCE:
TEMPERATURE COEFFICIENT:
DISSIPATION FACTOR (TYP.):
Microstrip Ribbon Leads (Non-Magnetic),
Termination Code “1”
-55 to +125°C
>1000 ΩF or >10 GΩ,
whichever is less
@ 25°C WVDC
0 ± 30ppm /°C, -55 to 125°C
< 0.05% @ 1 MHz
Axial Ribbon Leads (Non-Magnetic), Termination Code “2”
e
e
T
T
W
L
X
X
W
W
E/B
T
LL
Axial Wire Leads (Non-Magnetic),
Termination Code “3”
L
L
LL
LL
Radial Ribbon Leads (Non-Magnetic),
Termination Code “4”
LL
Radial Wire Leads (Non-Magnetic),
Termination Code “5”
LL
L
L
L
LL
W
T
T
T
W
x
W
LL
LL
e
x
Lead
Size
S42E
1
S48E
S58E
S42E
2
S48E
S58E
3
12
S42E S48E
S58E
4
S42E S48E
S58E
5
S42E S48E
S58E
Units
In
mm
In
mm
In
mm
In
mm
In
mm
In
mm
In
mm
In
mm
In
mm
L
Tol
W
Tol
T (max)
X
Tol
e
Tol
0.135
3.43
+/- .015
+/- 0.38
0.110
2.79
+/- .020
+/- 0.51
0.102
3.05
0.015
0.38
0.25
6.35
0.093
2.36
+/-0.005
+/- 0.13
0.004
0.102
+/- 0.001
+/- 0.025
0.250
6.35
0.38
9.65
0.110
2.79
0.250
6.35
0.38
9.65
0.110
2.79
0.110
2.79
0.110
2.79
+/- 0.015
+/-0.38
+/- 0.010
+/- 0.25
+/- .020
+/- 0.51
+/- 0.015
+/-0.38
+/- 0.010
+/- 0.25
+/- .015
+/- 0.38
+/- .015
+/- 0.38
+/- .015
+/- 0.38
0.160
3.81
0.170
4.32
0.102
2.59
0.160
3.81
0.170
4.32
0.102
2.59
0.102
2.59
0.102
2.59
0.025
0.63
0.04 MAX.
1.02 MAX.
0.015
0.38
0.025
0.63
0.04 MAX.
1.02 MAX.
0.50
12.7
0.750
19.05
0.25
6.35
0.50
12.7
0.750
19.05
0.50
12.70
0.25
6.35
0.50
12.70
0.240
6.10
0.35
8.89
0.093
2.36
0.240
6.10
0.35
8.89
+/- 0.005
+/- 0.13
+/- 0.010
+/- 0.25
+/-0.005
+/- 0.13
+/- 0.005
+/- 0.13
+/- 0.010
+/- 0.25
0.004
0.102
0.010
0.25
0.004
0.102
0.004
0.102
0.010
0.25
+/- 0.001
+/- 0.025
+/- 0.005
+/- 0.13
+/- 0.001
+/- 0.025
+/- 0.001
+/- 0.025
+/- 0.005
+/- 0.13
0.245
+/- 0.025
6.22
+/- 0.64
0.38 +0.035 / - 0.010
9.65
+0.89 / -0.25
0.135
+/- .015
3.43
+/- 0.38
0.245
+/- 0.025
6.22
+/- 0.64
0.38 +0.035 / - 0.010
9.65
+0.89 / -0.25
0.145
+/- .020
3.68
+/- 0.51
0.135
+/- .015
3.43
+/- 0.38
0.145
+/- .020
3.68
+/- 0.51
E/B (typ) LL(min)
#26 AWG, .016 (.406) dia. nominal
0.093
2.36
+/-0.005
+/- 0.13
0.004
0.102
+/- 0.001
+/- 0.025
#26 AWG, .016 (.406) dia. nominal
www.johansontechnology.com
SERIES RESONANCE CHART
Typical Series Resonant Frequency (Series Mounted)
25.0
Frequency (GHz)
10.0
R05/0201
R07/0402
R14/0603
1.0
R15/0805
0.5
1
0.1
200
100
10
Capacitance (pF)
RF CHaRaCTeRiSTiCS - l-SeRieS
ESR vs Frequency: 0201/R05L
Q vs Frequency: 0201/R05L
1
10000
ESR (Ohms)
0.5 pF
1.2 pF
3.3 pF
8.2 pF
5.6 pF
22 pF
1000
Q
3.3 pF
8.2 pF
1.2 pF
5.6 pF
22 pF
0.1
0.5 pF
100
10
0.01
1
0
500
1000
1500
2000
2500
0
500
Frequency (MHz)
ESR vs Capacitance: 0201/R05L
2000
2500
Q vs Capacitance: 0201/R05L
1
10000
ESR (Ohms)
1000
1500
Frequency (MHz)
150-250MHz
1900-2000MHz
900-1000MHz
2100-2250MHz
1000
1
10
Capacitance (pF)
50
10
0.5
100
0.01
0.5
2100-2250MHz
Q
1900-2000MHz
0.1
900-1000MHz
150-250MHz
1
10
50
Capacitance (pF)
www.johansontechnology.com
13
S-SeRieS RF CHaRaCTeRiSTiCS VeRSuS FReQuenCy
Equivalent Series Resistance: 0402/R07S
Q Factor: 0402/R07S
1
10000
ESR (Ohms)
0.1
1000
Q
100
0.5 pF
4.7 pF
10 pF
1.2 pF
8.2 pF
15 pF
10
0.01
0.5 pF
4.7 pF
10 pF
1.2 pF
8.2 pF
15 pF
1
0
500
1000
1500
2000
2500
0
500
1000
Frequency (MHz)
1500
2000
2500
Frequency (MHz)
Equivalent Series Resistance: 0603/R14S
Q Factor: 0603/R14S
10000
1
3.3 pF
10 pF
15 pF
33 pF
47 pF
1000
ESR (Ohms)
H
0.1
15 pF
10 pF
33 pF
Q
100
3.3 pF
47 pF
10
0.01
1
0
500
1000
1500
Frequency (MHz)
2000
2500
0
500
1000
Equivalent Series Resistance: 0805/R15S
15 pF
47 pF
2000
2500
Q Factor: 0805/R15S
10000
1
4.7 pF
1500
Frequency (MHz)
100 pF
220pF
4.7pF
15pF
100pF
220pF
47pF
Q
ESR (Ohms)
1000
0.1
100
10
1
0.01
0
500
1000
1500
2000
2500
0
500
Frequency (Mhz)
1000
1500
Frequency (MHz)
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
14
www.johansontechnology.com
2000
2500
S-SeRieS RF CHaRaCTeRiSiTCS VeRSuS CapaCiTanCe
Q Factor: 0402/R07S
Equivalent Series Resistance: 0402/R07S
10000
1
0.1
150-250MHz
1900-2000MHz
900-1000MHz
2100-2250MHz
0.01
0.5
100
Q
10
150-250MHz
1900-2000MHz
2100-2250MHz
900-1000MHz
1
10
1
0.5
20
1
10
Capacitance (pF)
20
Capacitance (pF)
Equivalent Series Resistance: 0603/R14S
Q Factor: 0603/R14S
1
10000
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
1000
ESR (Ohms)
1000
ESR (Ohms)
0.1
100
Q
10
150-250MHz
900-1000MHz
0.01
10
Capacitance (pF)
1
Equivalent Series Resistance: 0805/R15S
1900-2000MHz
2100-2250MHz
10
Capacitance (pF)
50
Q Factor: 0805/R15S
10000
900-1000MHz
1900-2000MHz
1
50
1
150-250MHz
1
150-250MHz
1900-2000MHz
2100-2250MHz
900-1000MHz
2100-2250MHz
ESR (Ohms)
ESR (Ohms)
1000
0.1
100
10
0.01
1
10
100
Capacitance (pF)
1000
1
1
10
100
1000
Capacitance (pF)
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
www.johansontechnology.com
15
S42e SeRieS RF CHaRaCTeRiSTiCS VeRSuS FReQuenCy
Equivalent Series Resistance: 1111/S42E
Q Factor: 1111/S42E
10000
1
1.5pF
3.9pF
9.1pF
15pF
27pF
82pF
Q
ESR (Ohms)
1000
0.1
100
10
1.5pF
3.9pF
9.1pF
15pF
27pF
82pF
0.01
0
200
400
600
800
1000
1200
1
1400
0
200
400
600
800
1000
1200
1400
Frequency (MHz)
Frequency (MHz)
S42e SeRieS RF CHaRaCTeRiSTiCS VeRSuS CapaCiTanCe
S42E Equivalent Series Resistance vs Capacitance, Typical
S42E Q vs. Capacitance, Typical
10000
1
140 - 250 MHz
350 - 750 MHz
600 - 1200 MHz
0.1
Q
ESR (Ohms)
1000
100
10
140 - 250 MHz
1
0.01
1
10
100
1000
1
Capacitance (pF)
S42E SRF (Series Mount), Typical
F re q u e n c y (G H z )
JTI S42E SRF
1
1
10
100
1000
Capacitance (pF)
16
10
www.johansontechnology.com
600 - 1200 MHz
100
Capacitance (pF)
10
0.1
350 - 750 MHz
1000
JTi S48e gRapHiCal DaTa
SRF (Shunt Mount), S48E, Typical (Preliminary)
Current Rating vs. Capacitance, S48E, Typical (Preliminary)
10
100
Current Rating (amps)
Frequency (GHz)
JTI S48E SRF
1
10
1
30 MHz
64 MHz
128 MHz
0.1
0.1
1
10
100
1
1000
10
Capacitance (pF)
100
1000
10000
Capacitance (pF)
Solid traces show voltage limited current (Vrms)
As measured on a 8720C VNA, using a ShuntThrough fixture, and using the S11 magnitude dip
to determine the SRF
Dotted traces show power dissipation limited
current (Based on 4 Watts Power Dissipation, and
125 degrees C case temp.)
S48E Q vs. Capacitance, Typical (Preliminary)
S48E ESR vs. Capacitance, Typical (Preliminary)
0.100
100000
ESR (ohms)
Q
10000
1000
100
ESR vs. C @ 64 MHz
Q vs C @ 64 MHz
Q vs C @ 128 MHz
ESR vs. C @ 128 MHz
10
1
10
100
1000
10000
Capacitance (pF)
0.010
1
10
100
1000
10000
Capacitance (pF)
As measured on a 4287A LCR meter, using a
16092A fixture
As measured on a 4287A LCR meter, using a
16092A fixture
www.johansontechnology.com
17
JTi S48e gRapHiCal DaTa
S48E (EIA 2525) 12pF* (ESR vs. Freq)
0.060
ESR (Ohms)
0.055
0.050
0.045
0.040
S48E
0.035
0
200
400
600
800
Frequency (MHz)
*Actual data from Boonton 34A resonant line.
JTi S58e gRapHiCal DaTa
S58E (EIA 3838) 47pF* (ESR vs. Freq)
0.045
ESR (Ohms)
0.040
0.035
0.030
0.025
S58
0.020
0
100
200
300
400
500
600
700
Frequency (MHz)
*Actual data from Boonton 34A resonant line.
www.johansontechnology.com
18
工商网监
湘ICP备2023018690号
