501P05W104KJ4C

www.johansondielectrics.com SWITCH-MODE CERAMIC CAPACITORS Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and high frequency applications where tantalum or aluminum electrolytic capacitors may not be suitable. The P-Series feature mechanical and pin-out configurations per DSCC 87106 and 88011 drawings while the E-Series feature mechanical and pin-out configurations more common in European design applications. KEY FEATURES • P-Series Approved to DSCC Drawings 87106 & 88011 • E-Series Common European Lead Style • NPO & X7R Dielectrics, 50 to 500 VDC Ratings • Low ESR / Low ESL, Ideal for SMPS Filtering Applications • Custom Sizes, Voltages, and Values Available MECHANICAL CHARACTERISTICS E D Straight Lead L-Lead J-Lead B A .070" ± .010 F .250" MIN .010" ± .002 .055" ± .010 C .020" ± .002 .100" MAX .025" MIN .050" min .050" min .100" TYP HOW TO ORDER 201 P03 W 275 VOLTAGE Standard Voltages: 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V CASE SIZE See Chart DIELECTRIC N = NPO B = BX W = X7R CAPACITANCE 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pF 102 = 1000 pF 103 = 0.01 μF 105 = 1.00 μF Part number written: 201P03W275KJ4H J 4 H LEAD STYLE J = “J” Leads (formed in) MARKING 3 = Specified 4 = Standard Marking SPECIAL CODE C = Standard Part H = Group A Tested K TOLERANCE J = ± 5% K = ± 10% L = ± 15% M N Z P = = = = ± 20% ± 30% +80% -20% +100% -0% K = “J” Leads with reduced height of .045” +/- .010” L = “L” Leads (formed out) M = “L” Leads with reduced height of .045” +/- .010” N = Straight Lead 1 15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• FAX (818) 364-6100 www.johansondielectrics.com SWITCH-MODE CERAMIC CAPACITORS IMPEDANCE VS FREQUENCY (TYPICAL) 10 The left-hand portion of the curves represents the capacitive reactance of two typical values. The impedance decreases until series resonance is reached. At this point (the bottom of the V), the only component of the impedance is the ESR. At higher frequencies (the inductive portion) the ESR remains relatively low so that effective filtering is maintained. Impedance (ohms) 1 0.1 XC XL 270 μF 0.01 0.001 0.001 ESR VS FREQUENCY (TYPICAL) 0.01 10 μF 0.1 Frequency (MHz) 1 10 1 10 1 10 1 These curves reflect the very low ESR of two typical values. These ESRs are much lower than Tantalums or Aluminum electrolytics of the same values. The result is the ability to provide filtering (low loss) and to handle high power requirements. ESR (ohms) 0.1 0.01 10 μF 0.001 0.0001 0.001 RIPPLE CURRENT VS FREQUENCY (TYPICAL) 270 μF 0.01 0.1 Frequency (MHz) 1000 Ripple Current (Amperes) Here are two examples of the ability of Switch-Mode capacitors to handle high values of ripple current (high power) at various frequencies. Refer to the “AC Power Computations” applications note or contact Johanson Applications Engineering for more information. 100 P56, 270 μF P03, 10 μF 10 1 0.001 0.01 0.1 Frequency (MHz) SOLDERING PRECAUTIONS The large ceramic mass of Switch-Mode capacitors increases their susceptibility to damage from thermal shock during soldering. Parts should be pre-heated to within 50°C of the peak soldering temperature and the pre-heating cycle’s thermal gradient should be limited to a maximum of 2°C per second. ELECTRICAL CHARACTERISTICS Dielectric: Temperature Coefficient: Dissipation Factor: Aging Insulation Resistance (Min. @ 25°C, WVDC) Dielectric Strength: Test Conditions: NPO X7R 0 ±30ppm/°C (-55 to +125°C) ±15% (-55 to +125°C) 0.1% max. 2.5% max. None -2.5% per decade hour 1000 ΩF or 100 GΩ, whichever is less 500 ΩF or 50 GΩ, whichever is less For 500V Ratings: 750VDC, 25ºC, 50mA max For 200V Ratings: 2xWVDC, 25ºC, 50mA max For 25-100V Ratings: 2.5xWVDC, 25ºC, 50mA max 1kHz ±50Hz;1.0±0.2 VRMS 2 15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• FAX (818) 364-6100 www.johansondielectrics.com SWITCH-MODE CERAMIC CAPACITORS P-SERIES SWITCH-MODE CAPACITANCE / VOLTAGE SELECTION CASE SIZE P05 P25 P35 P45 P55 P04 P24 P34 P44 P54 P03 P23 P33 P43 P53 P01 P21 P31 P41 P51 P02 P22 P32 P42 P52 P06 P26 P36 P46 P56 NPO Max Capacitance (μF) 50V 100V 200V 500V BX Max Capacitance (μF) 50V 100V 200V 500V X7R Max Capacitance (μF) 50V 100V 200V 500V 0.07 0.14 0.21 0.28 0.35 0.22 0.44 0.66 0.88 1.1 0.70 1.4 2.1 2.8 3.5 1.4 2.8 4.2 5.6 7.0 2.0 4.0 6.0 8.0 10 4.0 8 12 16 20 1.3 2.6 3.9 5.2 6.5 4.0 8.0 12 16 20 10 20 30 40 50 20 40 60 80 100 30 60 90 120 150 69 130 200 270 340 3.0 6.0 9 12 15 9 18 27 36 45 28 56 84 112 140 50 100 150 200 250 75 150 220 300 370 160 320 480 640 800 0.05 0.10 0.15 0.20 0.25 0.15 0.30 0.45 0.60 0.75 0.50 1.0 1.5 2.0 2.5 1.0 2.0 3.0 4.0 5.0 1.4 2.8 4.2 5.6 7.0 2.8 5.6 8.4 11 14 0.04 0.08 0.12 0.16 0.20 0.12 0.24 0.36 0.48 0.60 0.39 0.78 1.2 1.5 2.0 0.75 1.5 2.2 3.0 3.7 1.0 2.0 3.0 4.0 5.0 2.2 4.4 6.6 8.8 11 0.02 0.04 0.06 0.08 0.10 0.07 0.14 0.21 0.28 0.35 0.22 0.44 0.66 0.88 1.1 0.44 0.88 1.3 1.8 2.2 0.6 1.2 1.8 2.4 3.0 1.2 2.4 3.6 4.8 6 0.70 1.4 2.1 2.8 3.5 2.0 4.0 6.0 8 10 6.8 13 20 27 34 13 27 40 54 68 19 38 57 76 95 40 80 120 160 200 0.37 0.74 1.1 1.5 1.8 1.1 2.2 3.3 4.4 5.5 3.5 7.0 10 14 17 7.0 14 21 28 35 10 20 30 40 50 20 40 60 80 100 0.17 0.34 0.51 0.68 0.85 0.50 1.0 1.5 2.0 2.5 1.5 3.0 4.5 6.0 7.5 3.0 6.0 9.0 12 15 5 9 13 18 22 9 18 27 36 45 Dielectric specifications may be found on page 16. Contact the factory for RoHS products. 3 15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• FAX (818) 364-6100 2.2 4.4 6.6 8.8 11 6.5 13 19 26 32 20 40 60 80 100 40 80 120 160 200 55 110 160 220 270 110 220 330 440 550 1.0 2.0 3.0 4.0 5.0 3.0 6 9 12 15 9.5 19 28 38 47 19 38 57 76 95 25 50 75 100 125 50 100 150 200 250 0.50 1.0 1.5 2.0 2.5 1.5 3.0 4.5 6.0 7.5 4.7 9.4 14 18 23 9.4 18 27 36 46 14 28 42 56 70 25 50 75 100 125 www.johansondielectrics.com SWITCH-MODE CERAMIC CAPACITORS P-SERIES SWITCH-MODE MECHANICAL CHARACTERISTICS CASE A B C D D E F Leads SIZE P05 P25 P35 P45 P55 P04 P24 P34 P44 P54 P03 P23 P33 P43 P53 P01 P21 P31 P41 P51 P02 P22 P32 P42 P52 P06 P26 P36 P46 P56 (max”) .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 (max”) .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 ±.025” (min.”) (max”) (max”) (min.”) per side .250 0.224 0.275 .300 .080 3 .400 0.350 0.425 .440 .180 4 .450 0.950 1.075 .500 .180 10 .450 1.950 2.075 .500 .180 20 .800 1.450 1.535 .870 .530 15 1.250 1.950 2.075 1.350 .980 20 4 15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• FAX (818) 364-6100 www.johansondielectrics.com SWITCH-MODE CERAMIC CAPACITORS E-SERIES SWITCH-MODE CAPACITANCE / VOLTAGE SELECTION SIZE CODE E24 E34 E44 E54 E25 E35 E45 E55 E26 E36 E46 E56 E27 E37 E47 E57 E21 E31 E41 E51 E28 E38 E48 E58 E22 E32 E42 E52 E29 E39 E49 E59 NPO Max Capacitance (μF) 50V 100V 200V 500V 0.13 0.09 0.07 0.045 0.26 0.18 0.14 0.09 0.39 0.27 0.21 0.13 0.52 0.36 0.28 0.18 0.22 0.15 0.12 0.08 0.44 0.30 0.24 0.16 0.66 0.45 0.36 0.24 0.88 0.60 0.48 0.32 0.4 0.30 0.22 0.15 0.8 0.60 0.44 0.30 1.2 0.90 0.66 0.45 1.6 1.2 0.9 0.60 0.7 0.5 0.40 0.25 1.4 1.0 0.8 0.5 2.1 1.5 1.2 0.8 2.8 2.0 1.6 1.0 0.7 0.5 0.40 0.25 1.4 1.0 0.8 0.5 2.1 1.5 1.2 0.8 2.8 2.0 1.6 1.0 0.8 0.6 0.50 0.30 1.6 1.2 1.0 0.60 2.4 1.8 1.5 0.90 3.2 2.4 2.0 1.2 1.4 1.0 0.75 0.50 2.8 2.0 1.5 1.0 3.2 3.0 2.2 2.0 5.6 4.0 3.0 3.0 2.0 1.4 1.0 0.70 4.0 2.8 2.0 1.4 6.0 4.2 3.0 2.1 8.0 5.6 4.0 2.8 BX Max Capacitance 50V 100V 200V 2.2 1.5 0.8 4.4 3.0 1.6 6.6 4.5 2.4 8.8 6.0 3.2 3.9 2.5 1.4 7.8 5.0 2.8 11 7.5 4.2 15 10 5.6 7.0 4.5 2.5 14 9.0 5.0 21 13 7.5 28 18 10 13 8.5 4.5 26 17 9.0 39 25 13 52 34 18 13 8.5 4.5 26 17 9.0 39 25 13 52 34 18 15 10 5.5 30 20 11 45 30 16 60 40 22 24 15 8.5 48 30 17 72 45 25 96 60 34 33 22 12 66 44 24 99 66 36 130 88 48 (μF) 500V 0.35 0.70 1.0 1.4 0.60 1.2 1.8 3.0 1.0 2.0 3.0 4.0 2.0 4.0 6.0 8.0 2.0 4.0 6.0 8.0 2.2 4.4 6.6 8.8 3.5 7.0 10 14 5.0 10 15 20 Dielectric specifications may be found on page 16. Contact the factory for RoHS products. 5 15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• FAX (818) 364-6100 X7R Max Capacitance (μF) 50V 100V 200V 500V 5.0 4.0 2.5 1.0 10 8.0 5.0 2.0 15 12 7.5 3.0 20 16 10 4.0 9.0 6.5 4.0 1.8 18 13 8.0 3.6 27 19 12 5.4 36 26 16 7.2 16 12 7.5 3.3 32 24 15 6.6 48 36 22 9.9 64 48 30 13 30 22 14 6.0 60 44 28 12 90 66 42 18 120 88 56 24 30 22 14 6.0 60 44 28 12 90 66 42 18 120 88 56 24 35 25 16 7.0 70 50 32 14 100 75 48 21 140 100 64 28 50 40 25 11 100 80 50 22 150 120 75 33 200 160 100 44 75 50 35 16 150 100 70 32 220 150 100 48 300 200 140 64 www.johansondielectrics.com SWITCH-MODE CERAMIC CAPACITORS E-SERIES SWITCH-MODE MECHANICAL CHARACTERISTICS SIZE CODE E24 E34 E44 E54 E25 E35 E45 E55 E26 E36 E46 E56 E27 E37 E47 E57 E21 E31 E41 E51 E28 E38 E48 E58 E22 E32 E42 E52 E29 E39 E49 E59 A (max.) mm 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 3.8 7.4 11.1 14.8 In. 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 0.150 0.291 0.437 0.583 C +/- 0.5 mm (.020”) D (max.) E (max.) Leads mm In. mm In. mm In. per side 8.2 0.322 8.7 0.342 9.2 0.362 3 10.2 0.400 10.7 0.421 10.7 0.421 4 14.0 0.551 13.6 0.535 14.9 0.586 5 15.2 0.600 21.6 0.850 16.8 0.661 7 20.3* 0.800* 16.6 0.653 21.6 0.850 6 10.2 0.400 38.2 1.503 12.0 0.472 14 15.2 0.600 38.2 1.503 18.9 0.744 14 20.3* 0.800* 40.6 1.598 24.0 0.944 14 * Lead spacing tolerance +/- 0.8 mm (.031”) when 20.3 mm (.800”) nominal spacing is specified. 6 15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• FAX (818) 364-6100