5515LP15A730

"High Frequency Ceramic Solutions" 5.5 GHz Low Pass Filter Detail Specification: 12/21/2009 General Specifications Part Number Frequency (MHz) Insertion Loss Return Loss Attenuation (min.) Attenuation (min.) Input Power 5515LP15A730 5150 - 5875 0.6 dB max. 10.9 dB min. 25 dB @ 2 x fo 25 dB @ 3 x fo Ref 1 Watt max. Impedance Operating Temperature 50 Ω -40 to +85°C P/N 5515LP15A730 Page 1 of 2 Terminal Configuration No. Function 1 2 3 4 GND NC GND OUT GND NC GND IN 3 p 4 T g b 5 6 7 8 2 1 Mechanical Dimensions In 0.079 ± 0.004 2.00 L 1.25 W 0.049 ± 0.004 0.85 T 0.033 ± 0.004 0.30 a 0.012 ± 0.004 0.20 b 0.008 ± 0.004 c 0.012 +.004/-.008 0.30 0.35 g 0.014 ± 0.004 0.65 p 0.026 ± 0.002 5 mm ± 0.10 ± 0.10 ± 0.10 ± 0.10 ± 0.10 +0.1/-0.2 ± 0.10 ± 0.05 L a c a W 6 7 8 Mounting Considerations Mount these devices with brown mark facing up. * Line width should be designed to provide 50 ohm impedance, depending on PCB material and thickness Units: mm 0.15 0.65 0.35 0.15 Land T 1.3 1.0 * * 0.225 0.5 0.35 Solder Resist b No pattern Solder Resist Through-hole (φ 0.30) 1.6 1.0 0.15 0.6 0.22 all units in mm Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2009 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 5.5 GHz Low Pass Filter Detail Specification: 12/21/2009 Typical Electrical Performance (T=25°C) P/N 5515LP15A730 Page 2 of 2 ) ) ) ) ) ) ) ) Insertion/Return Loss ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2009 Johanson Technology, Inc. All Rights Reserved