631R18W103KV4E

MULTI-LAYER HIGH-Q CAPACITORS These lines of multilayer capacitors have been developed for High-Q and microwave applications. • The S-Series (R03S, R07S, R14S, R15S) capacitors give an ultra-high Q performance, and exhibit NP0 temperature characteristics. • The L-Series (R05L) capacitors give mid-high Q performance, and exhibit NP0 temperature characteristics. • The E-Series (S42E, S48E, S58E) capacitors give excellent high-Q performance from HF to Microwave frequencies. Typical uses are high voltage, high current applications. They are offered in chip (Ni barrier or Non-Magnetic Pt.-Ag) or in Non-Magnetic leaded form. • The W-Series (R05W) capacitors offer a large capacitance value in an ultra-small 0201 package size. These exhibit a X7R temperature characteristic. • RoHS compliance is standard for all unleaded parts (see termination options box). HOW TO ORDER 252 S48 VOLTAGE (DC) CASE SIZE CAPACITANCE (pF) R03 (01005) R05 (0201) R07 (0402) R14 (0603) R15 (0805) S42 (1111) S48 (2525) S58 (3838) 1st two digits are significant; third digit denotes number of zeros, R = decimal. 6R3 = 6.3 V 101 = 100 V 160 = 16 V 250 = 25 V 500 = 50 V 201 = 200 V 251 = 250 V 301 = 300 V 501 = 500 V 102 = 1000 V 152 = 1500 V 202 = 2000 V 252 = 2500 V 362 = 3600 V 502 = 5000 V 722 = 7200 V E 470 100 = 10 pF 101 = 100 pF DIELECTRIC S = Ultra High Q NPO L = High Q NPO E = Ultra High Q NPO, High Voltage, High Power, *T = High Temp (175C) Ultra High Q NPO W= X7R V K TOLERANCE A = ± 0.05 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF F = ±1 % G = ±2% J = ±5% K = ± 10% For tolerance availability, see chart. 4 TERMINATION Nickel Barrier V = Ni/Sn (Green) T = Ni/SnPb G = Ni/Au (Green) Non-Mag* U = Cu/Sn (Green) C = Cu/SnPb Leaded (All Non-Mag)* 1 = Microstrip 2 = Axial Ribbon 3 = Axial Wire 4 = Radial Ribbon 5 = Radial Wire Part Number written: 252S48E470KV4E MARKING 3 = Cap Code & Tolerance 4 = No Marking 6 = EIA Code (Marking on 0805 and larger only) E PACKAGING S = Bulk W = Waffle Pack 01005 - 0603 Y = Paper 5” Reel T = Paper 7” Reel *R = Paper 13” Reel *J = Paper 5” Reel Horizontally Oriented Electrodes *N = Paper 5” Reel Vertically Oriented Electrodes *L = Paper 7” Reel Horizontally Oriented Electrodes *V = Paper 7” Reel Vertically Oriented Electrodes 0805 - 3838 Z = Embossed 5” Reel E = Embossed 7” Reel *U = Embossed 13” Reel *M = Embossed 5” Reel Horizontally Oriented Electrodes *Q = Embossed 5” Reel Vertically Oriented Electrodes *G = Embossed 7” Reel Horizontally Oriented Electrodes *P = Embossed 7” Reel Vertically Oriented Electrodes Tape specifications conform to EIA RS481 “*” - Not available for all MLCC - Call factory for info. www.johansontechnology.com 7 low eSR / HigH-Q CapaCiToR SeleCTion CHaRT Miniature Size - Portable Electronics RF Power Applications EIA Size 01005 (R03S) Cap. Value 0201 (R05) NPO (R05L) X7R* (R05W) 0402 0603 0805 0805 (R07S) (R14S) (R15S) (R15E) Capacitance pF 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 Code 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 330 2525 (S48E) 3838 (S58E) Voltage A B C D A** B C D F G J K 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 16 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50/200 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 50 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V * The R05W parts, which are X7R, can only be provided with “K” or “M” tolerance. **A tolerance only available for R07S (0402) and R14S(0603) caps 8 1111 (S42E) 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V Consult factory for Non-Standard values. www.johansontechnology.com low eSR / HigH-Q CapaCiToR SeleCTion CHaRT Miniature Size - Portable Electronics RF Power Applications EIA Size 01005 (R03S) Cap. Value Capacitance pF 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1200 1500 1800 2200 2700 3300 3900 4700 5100 10000 Code 360 390 430 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 301 331 361 391 431 471 511 561 621 681 751 821 911 102 122 152 182 222 272 332 392 472 512 103 0201 (R05) NPO (R05L) X7R* (R05W) 0402 0603 0805 0805 (R07S) (R14S) (R15S) (R15E) Tolerance F G 2525 (S48E) 3838 (S58E) Voltage 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 25 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 16 V J K 16 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 250 V 16 V 16 V G 16 V J 10 V K 1111 (S42E) 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 300V 300V 300V 300V 300V 300V 300V 200V 200V 200V 200V 200V 200V 200V 200V 200V 100V 100V 100V 50V 50V 50V 50V 50V 10 V 10 V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 1500V 1500V 1500V 1500V 1500V 1500V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 1000V 500V 500V 300V 300V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 3600V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 2500V 1000V 1000V 1000V 1000V 1000V 1000V 500V 500V 500V 500V 500V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 7200V 6.3 V * The R05W parts, which are X7R, can only be provided with “K” and “M” tolerance. Consult factory for Non-Standard values. www.johansontechnology.com 9 DieleCTRiC CHaRaCTeRiSTiCS npo x7R TEMPERATURE COEFFICIENT: 0 ± 30ppm /°C, -55 to 125°C ± 15%, -55 to 125°C QUALITY FACTOR / DF: Q >1,000 @ 1 MHz, Typical 10,000 16VDC DF≤ 3.5% @ 1 KHz, 25°C 10VDC DF≤ 5.0% @ 1 KHz, 25°C INSULATION RESISTANCE: >100 GΩ @ 25°C,WVDC; 125°C IR is 10% of 25°C rating DIELECTRIC STRENGTH: 500 V ≤ 2.5 X WVDC Min., 25°C, 50 mA max >500 ΩF* or 10 GΩ* @ 25°C,WVDC; 125°C IR is 10% of 25°C rating * whichever is less 2.5 X WVDC Min., 25°C, 50 mA max 1000 V ≤ 1.5 X WVDC Min., 25°C, 50 mA max > 1500 = 1 X WVDC Min., 25°C, 50 mA max 1KHz ±50Hz, 1.0±0.2 VRMS, 25°C 100 - 10,000 pF 1MHz ±50kHz, 1.0±0.2 VRMS, 25°C TEST PARAMETERS:: AVAILABLE CAPACITANCE: Size 01005: Size 0201: Size 0402: Size 0603: 0.2 - 10 pF 0.2 - 100 pF 0.2 - 33 pF 0.2 - 100 pF Size 0805: Size 1111: Size 2525: Size 3838: 0.3 - 220 pF 0.2 - 1000 pF 1.0 - 2700 pF 1.0 - 5100 pF MECHANICAL & ENVIRONMENTAL CHARACTERISTICS SPECIFICATION SOLDERABILITY: RESISTANCE TO SOLDERING HEAT: TERMINAL ADHESION: PCB DEFLECTION: LIFE TEST: THERMAL CYCLE: HUMIDITY, STEADY STATE: HUMIDITY, LOW VOLTAGE: VIBRATION: 10 Solder coverage ≥ 90% of metalized areas No termination degradation No mechanical damage Capacitance change: ±2.5% or 0.25pF Q>500 I.R. >10 G Ohms Breakdown voltage: 2.5 x WVDC Termination should not pull off. Ceramic should remain undamaged. No mechanical damage. Capacitance change: 2% or 0.5pF Max MIL-STD-202, Method 108l No mechanical damage Capacitance change: ±3.0% or 0.3 pF Q>500 I.R. >1 G Ohms Breakdown voltage: 2.5 x WVDC No mechanical damage. Capacitance change: ±2.5% or 0.25pF Q>2000 I.R. >10 G Ohms Breakdown voltage: 2.5 x WVDC No mechanical damage. Capacitance change: ±5.0% or 0.50pF max. Q>300 I.R. ≥ 1 G-Ohm Breakdown voltage: 2.5 x WVDC No mechanical damage. Capacitance change: ±5.0% or 0.50pF max. Q>300 I.R. = 1 G-Ohm min. Breakdown voltage: 2.5 x WVDC No mechanical damage. Capacitance change: ±2.5% or 0.25pF Q>1000 I.R. ≥ 10 G-Ohm Breakdown voltage: 2.5 x WVDC TEST PARAMETERS Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux then dip in Sn62 solder @ 240°±5°C for 5±1 sec Preheat device to 80°-100°C for 60 sec. followed by 150°-180°C for 60 sec. Dip in 260°±5°C solder for 10±1 sec. Measure after 24±2 hour cooling period Linear pull force* exerted on axial leads soldered to each terminal. *0402 ≥ 2.0lbs, 0603 ≥ 2.0lbs (min.) Glass epoxy PCB: 0.5 mm deflection Applied voltage: 120% of WDVC for capacitors rated at 500 volts DC or less. 100% of WDVC for capacitors rated at 1250 volts DC or less. Temperature: 125°±3°C Test time: 1000+48-0 hours 5 cycles of: 30±3 minutes @ -55°+0/-3°C, 2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C, 2-3 min. @ 25°C Measure after 24±2 hour cooling period Relative humidity: 90-95% Temperature: 40°±2°C Test time: 500 +12/-0 Hours Measure after 24±2 hour cooling period Applied voltage: 1.5 VDC, 50 mA max. Relative humidity: 85±2% Temperature: 40°±2°C Test time: 240 +12/-0 Hours Measure after 24±2 hour cooling period Cycle performed for 2 hours in each of three perpendicular directions Frequency range 10Hz to 55 Hz to 10 Hz traversed in 1 minute. Harmonic motion amplitude: 1.5mm www.johansontechnology.com MECHANICAL CHARACTERISTICS Size Units EIA 01005 Metric (0402) EIA 0201 Metric (0603) EIA 0402 Metric (1005) EIA 0603 Metric (1608) EIA 0805 Metric (2012) In mm In mm Length .016 ±.001 Width Thickness End Band .008 ±.001 .008 ±.001 .006 Max. (0.40 ±0.03) (0.20 ±0.03) (0.20 ±0.03) (0.15 Max.) .024 ±.001 .012 ±.001 .012 ±.001 .008 Max. (0.60 ±0.03) (0.30 ±0.03) (0.30 ±0.03) (0.20 Max.) In .040 ±.004 .020 ±.004 .020 ±.004 .010 ±.006 mm (1.02 ±0.1) (0.51 ±0.1) (0.51 ±0.1) (0.25 ±.15) .062 ±.006 .032 ±.006 .030 +.005/-.003 .014 ±.006 In mm In mm (1.57 ±0.15) (0.81 ±0.15) (0.76 +.13-.08) (0.35 ±.15) .050 ±.008 .040 ±.006 .020 ±.010 (2.03 ±0.20) (1.27 ±0.20) (1.02 ±.15) (0.50 ±.25) .080 ±.008 HoRizonTal anD VeRTiCle oRienTeD CapaCiToRS Horizontal Electrode Orientation Vertical Electrode Orientation appliCaTionS & FeaTuReS Size: Performance: Termination: Applications: EIA 0201, 0402 SRF’s up to 20 GHz, Ultra High Q, Tight tolerance, Ultralow ESR Ni/Au, Ni/Sn, Ni/SnPb High Frequency Wireless Communications, Portable Wireless Products, Battery Powered Products RoHS Compliant BeniFiTS oF uSing oRienTeD CapaCiToRS • • • • • Consistent Orientation - Improved repeatability of production circuits. Consistent Orientation - More consistent filter performance. Vertical Orientation - The elimination of parallel frequencies. Vertical Orinetation - Lower inductance for a given capacitor. Horizontal Orientation - Lower coupling between adjacent capacitors. www.johansontechnology.com 11 e-SeRieS TeRminaTionS anD leaDS Termination Size S42E V,T S48E U,C S58E Units L Tol W 0.110 +.020 -.010 0.110 In mm 2.79 +0.51 -0.25 2.79 0.230 +.025 -.010 0.250 In mm 5.84 +0.63 -0.25 6.35 0.380 +.015 -.010 0.380 In mm 9.65 +0.38 -0.25 9.65 Tol T E/B For all E-Series Models: Tol +/- .015 0.102 Max. 0.015 Typ. +/- 0.008 +/- 0.38 2.59 Max. 0.38 Typ. +/- 0.20 +/- .015 0.150 Max. 0.025 Typ. +/- 0.38 3.81 Max. 0.63 Typ. +/- .010 0.170 Max. 0.025 Typ. +/- 0.25 4.32 Max. 0.63 Typ. Unleaded Termination Codes “V” (Ni/Sn), “T” (Ni/SnPb), “U” (Cu/Sn non-mag), “C” (Cu/SnPb non-mag) OPERATING TEMP. : INSULATION RESISTANCE: TEMPERATURE COEFFICIENT: DISSIPATION FACTOR (TYP.): Microstrip Ribbon Leads (Non-Magnetic), Termination Code “1” -55 to +125°C >1000 ΩF or >10 GΩ, whichever is less @ 25°C WVDC 0 ± 30ppm /°C, -55 to 125°C < 0.05% @ 1 MHz Axial Ribbon Leads (Non-Magnetic), Termination Code “2” e e T T W L X X W W E/B T LL Axial Wire Leads (Non-Magnetic), Termination Code “3” L L LL LL Radial Ribbon Leads (Non-Magnetic), Termination Code “4” LL Radial Wire Leads (Non-Magnetic), Termination Code “5” LL L L L LL W T T T W x W LL LL e x Lead Size S42E 1 S48E S58E S42E 2 S48E S58E 3 12 S42E S48E S58E 4 S42E S48E S58E 5 S42E S48E S58E Units In mm In mm In mm In mm In mm In mm In mm In mm In mm L Tol W Tol T (max) X Tol e Tol 0.135 3.43 +/- .015 +/- 0.38 0.110 2.79 +/- .020 +/- 0.51 0.102 3.05 0.015 0.38 0.25 6.35 0.093 2.36 +/-0.005 +/- 0.13 0.004 0.102 +/- 0.001 +/- 0.025 0.250 6.35 0.38 9.65 0.110 2.79 0.250 6.35 0.38 9.65 0.110 2.79 0.110 2.79 0.110 2.79 +/- 0.015 +/-0.38 +/- 0.010 +/- 0.25 +/- .020 +/- 0.51 +/- 0.015 +/-0.38 +/- 0.010 +/- 0.25 +/- .015 +/- 0.38 +/- .015 +/- 0.38 +/- .015 +/- 0.38 0.160 3.81 0.170 4.32 0.102 2.59 0.160 3.81 0.170 4.32 0.102 2.59 0.102 2.59 0.102 2.59 0.025 0.63 0.04 MAX. 1.02 MAX. 0.015 0.38 0.025 0.63 0.04 MAX. 1.02 MAX. 0.50 12.7 0.750 19.05 0.25 6.35 0.50 12.7 0.750 19.05 0.50 12.70 0.25 6.35 0.50 12.70 0.240 6.10 0.35 8.89 0.093 2.36 0.240 6.10 0.35 8.89 +/- 0.005 +/- 0.13 +/- 0.010 +/- 0.25 +/-0.005 +/- 0.13 +/- 0.005 +/- 0.13 +/- 0.010 +/- 0.25 0.004 0.102 0.010 0.25 0.004 0.102 0.004 0.102 0.010 0.25 +/- 0.001 +/- 0.025 +/- 0.005 +/- 0.13 +/- 0.001 +/- 0.025 +/- 0.001 +/- 0.025 +/- 0.005 +/- 0.13 0.245 +/- 0.025 6.22 +/- 0.64 0.38 +0.035 / - 0.010 9.65 +0.89 / -0.25 0.135 +/- .015 3.43 +/- 0.38 0.245 +/- 0.025 6.22 +/- 0.64 0.38 +0.035 / - 0.010 9.65 +0.89 / -0.25 0.145 +/- .020 3.68 +/- 0.51 0.135 +/- .015 3.43 +/- 0.38 0.145 +/- .020 3.68 +/- 0.51 E/B (typ) LL(min) #26 AWG, .016 (.406) dia. nominal 0.093 2.36 +/-0.005 +/- 0.13 0.004 0.102 +/- 0.001 +/- 0.025 #26 AWG, .016 (.406) dia. nominal www.johansontechnology.com SERIES RESONANCE CHART Typical Series Resonant Frequency (Series Mounted) 25.0 Frequency (GHz) 10.0 R05/0201 R07/0402 R14/0603 1.0 R15/0805 0.5 1 0.1 200 100 10 Capacitance (pF) RF CHaRaCTeRiSTiCS - l-SeRieS ESR vs Frequency: 0201/R05L Q vs Frequency: 0201/R05L 1 10000  ESR (Ohms)  0.5 pF 1.2 pF    3.3 pF 8.2 pF  5.6 pF    22 pF               1000 Q   3.3 pF  8.2 pF 1.2 pF  5.6 pF  22 pF    0.1 0.5 pF             100          10 0.01 1 0 500 1000 1500 2000 2500 0 500 Frequency (MHz) ESR vs Capacitance: 0201/R05L 2000 2500 Q vs Capacitance: 0201/R05L 1 10000    ESR (Ohms) 1000 1500 Frequency (MHz)          150-250MHz  1900-2000MHz  900-1000MHz  2100-2250MHz            1000    1 10 Capacitance (pF) 50 10 0.5   100 0.01 0.5 2100-2250MHz   Q  1900-2000MHz     0.1 900-1000MHz   150-250MHz  1 10 50 Capacitance (pF) www.johansontechnology.com 13 S-SeRieS RF CHaRaCTeRiSTiCS VeRSuS FReQuenCy Equivalent Series Resistance: 0402/R07S Q Factor: 0402/R07S 1 10000   ESR (Ohms)    0.1  1000                       Q    100     0.5 pF  4.7 pF  10 pF  1.2 pF  8.2 pF  15 pF           10 0.01  0.5 pF  4.7 pF  10 pF  1.2 pF  8.2 pF  15 pF 1 0 500 1000 1500 2000 2500 0 500 1000 Frequency (MHz) 1500 2000 2500 Frequency (MHz) Equivalent Series Resistance: 0603/R14S Q Factor: 0603/R14S 10000 1  3.3 pF   10 pF 15 pF   33 pF 47 pF      1000 ESR (Ohms)      H        0.1  15 pF 10 pF  33 pF   Q 100      3.3 pF  47 pF                10    0.01 1 0 500 1000 1500 Frequency (MHz) 2000 2500 0 500 1000 Equivalent Series Resistance: 0805/R15S 15 pF 47 pF 2000 2500 Q Factor: 0805/R15S 10000 1 4.7 pF 1500 Frequency (MHz) 100 pF 220pF 4.7pF 15pF 100pF 220pF 47pF Q ESR (Ohms) 1000 0.1 100 10 1 0.01 0 500 1000 1500 2000 2500 0 500 Frequency (Mhz) 1000 1500 Frequency (MHz) Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance. 14 www.johansontechnology.com 2000 2500 S-SeRieS RF CHaRaCTeRiSiTCS VeRSuS CapaCiTanCe Q Factor: 0402/R07S Equivalent Series Resistance: 0402/R07S 10000 1       0.1                150-250MHz  1900-2000MHz  900-1000MHz  2100-2250MHz 0.01 0.5        100 Q     10 150-250MHz 1900-2000MHz     2100-2250MHz 900-1000MHz 1 10 1 0.5 20 1 10 Capacitance (pF) 20 Capacitance (pF) Equivalent Series Resistance: 0603/R14S Q Factor: 0603/R14S 1 10000   150-250MHz  900-1000MHz  1900-2000MHz 2100-2250MHz     1000 ESR (Ohms)  1000  ESR (Ohms)     0.1                100 Q  10   150-250MHz 900-1000MHz 0.01 10 Capacitance (pF) 1 Equivalent Series Resistance: 0805/R15S 1900-2000MHz 2100-2250MHz 10 Capacitance (pF) 50 Q Factor: 0805/R15S 10000 900-1000MHz 1900-2000MHz  1 50 1 150-250MHz    1  150-250MHz 1900-2000MHz 2100-2250MHz 900-1000MHz 2100-2250MHz ESR (Ohms) ESR (Ohms) 1000 0.1 100 10 0.01 1 10 100 Capacitance (pF) 1000 1 1 10 100 1000 Capacitance (pF) Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance. www.johansontechnology.com 15 S42e SeRieS RF CHaRaCTeRiSTiCS VeRSuS FReQuenCy Equivalent Series Resistance: 1111/S42E Q Factor: 1111/S42E 10000 1 1.5pF 3.9pF 9.1pF 15pF 27pF 82pF Q ESR (Ohms) 1000 0.1 100 10 1.5pF 3.9pF 9.1pF 15pF 27pF 82pF 0.01 0 200 400 600 800 1000 1200 1 1400 0 200 400 600 800 1000 1200 1400 Frequency (MHz) Frequency (MHz) S42e SeRieS RF CHaRaCTeRiSTiCS VeRSuS CapaCiTanCe S42E Equivalent Series Resistance vs Capacitance, Typical S42E Q vs. Capacitance, Typical 10000 1 140 - 250 MHz 350 - 750 MHz 600 - 1200 MHz 0.1 Q ESR (Ohms) 1000 100 10 140 - 250 MHz 1 0.01 1 10 100 1000 1 Capacitance (pF) S42E SRF (Series Mount), Typical F re q u e n c y (G H z ) JTI S42E SRF 1 1 10 100 1000 Capacitance (pF) 16 10 www.johansontechnology.com 600 - 1200 MHz 100 Capacitance (pF) 10 0.1 350 - 750 MHz 1000 JTi S48e gRapHiCal DaTa SRF (Shunt Mount), S48E, Typical (Preliminary) Current Rating vs. Capacitance, S48E, Typical (Preliminary) 10 100 Current Rating (amps) Frequency (GHz) JTI S48E SRF 1 10 1 30 MHz 64 MHz 128 MHz 0.1 0.1 1 10 100 1 1000 10 Capacitance (pF) 100 1000 10000 Capacitance (pF) Solid traces show voltage limited current (Vrms) As measured on a 8720C VNA, using a ShuntThrough fixture, and using the S11 magnitude dip to determine the SRF Dotted traces show power dissipation limited current (Based on 4 Watts Power Dissipation, and 125 degrees C case temp.) S48E Q vs. Capacitance, Typical (Preliminary) S48E ESR vs. Capacitance, Typical (Preliminary) 0.100 100000 ESR (ohms) Q 10000 1000 100 ESR vs. C @ 64 MHz Q vs C @ 64 MHz Q vs C @ 128 MHz ESR vs. C @ 128 MHz 10 1 10 100 1000 10000 Capacitance (pF) 0.010 1 10 100 1000 10000 Capacitance (pF) As measured on a 4287A LCR meter, using a 16092A fixture As measured on a 4287A LCR meter, using a 16092A fixture www.johansontechnology.com 17 JTi S48e gRapHiCal DaTa S48E (EIA 2525) 12pF* (ESR vs. Freq) 0.060 ESR (Ohms) 0.055 0.050 0.045 0.040 S48E 0.035 0 200 400 600 800 Frequency (MHz) *Actual data from Boonton 34A resonant line. JTi S58e gRapHiCal DaTa S58E (EIA 3838) 47pF* (ESR vs. Freq) 0.045 ESR (Ohms) 0.040 0.035 0.030 0.025 S58 0.020 0 100 200 300 400 500 600 700 Frequency (MHz) *Actual data from Boonton 34A resonant line. www.johansontechnology.com 18