2738

Aluminum Electrolytic Capacitors – Accessories Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Insulated Version - Dimensions in mm M8 Stud (M12 Stud) All of the above accessories may be ordered individually using the part number shown or as kits using the kit part numbers shown in the Kit Contents and Ordering Information. Kit Part Number Part Code Size Description 2772 M8 Stepped poly washer 2773 M12 Stepped poly washer 2778 M8 Plain poly washer 2779 M12 Plain poly washer PYB7033 M8 x 1.5 Nylon nut PYB7026 M12 x 1.75 Nylon nut PYB7041 M12 x 1.75 Nylon nut Sold Separately PYB7042 M12 x 1.75 Nylon nut Sold Separately 2740 • • • 2741 • • • Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 1 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Non-Insulated Version - Dimensions in mm M8 Stud (M12 Stud) 13 (19) 14 (21) 0.8 (1.0) 6.5 (7.0) Washer Nut Steel Internal Toothed Washer Steel Nut All of the above accessories may be ordered individually using the part number shown or as kits using the kit part numbers shown in the Kit Contents and Ordering Information. Part Code Size Description 2352 M8 Steel External Toothed Washer 2353 M12 Steel Internal Toothed Washer 2788 M12 x 1.75 Steel nut 2789 M8 x 1.5 Steel nut Kit Part Number 2782 2785 • • • • Clamps – Millimeters (Material – Zinc Plated Steel) Horizontal Mounting Can Diameter A B C F Tolerance ±1.0 ±0.3 ±0.5 ±0.5 H1 25.0 40.0 22.5 12.7 10.0 H2 35.0 – 36.0 52.0 22.5 12.7 10.0 Type Vertical Mounting Can Diameter A B C F Tolerance ±1.0 ±0.3 ±0.5 ±0.5 V2 25.0 49.0 19.0 37.0 10.0 V3 35.0 – 36.0 58.5 19.0 46.5 10.0 V9 40.0 65.0 19.0 52.0 9.0 Type © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 2 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Clamps – Millimeters (Material – Zinc Plated Steel) cont. Vertical Mounting Can Diameter A B C E F Tolerance ±1.0 ±0.3 ±0.5 ±0.5 ±0.5 V4 50.0 – 51.0 75.0 27.5 65.0 4.9 9.5 V6 45.0 69.5 20.0 58.0 4.0 10.0 V8 63.5 90.0 27.5 77.5 4.9 9.5 PYC6041* 36.6 64.0 20.0 52.0 4.5 11.5 Type *PYC clamps are for PEH169 and PEH200 capacitors only. Diameters include platic insulation. Vertical Mounting Type 2736 Can Diameter A B C D F Tolerance ±1.0 ±0.3 ±0.5 ±0.3 ±0.5 35.0 – 36.0 63.0 12.2 54.5 17.2 9.0 When using mounting clamps, care should be taken not to obscure any safety vent in the can. Delivered without bolts and nuts for mounting. G Vertical Mounting Type 2737 Can Diameter A B C D E F G H Tolerance ±1.0 ±0.5 ±0.5 ±0.5 ±0.3 ±0.5 ±0.5 ±0.3 50.0 - 51.0 75.5 33.5 27.0 4.3 4.3 39.5 10.0 20 V10 65.0 - 66.0 90.0 40.0 30.0 5.0 4.5 46.0 10.0 20 2738 65.0 - 66.0 88.5 39.0 27.0 4.3 4.3 45.0 10.0 20 V11 76.0 - 77.0 100.5 45.5 30.0 5.0 4.5 51.5 10.0 20 V90N 90.0 111.1 50.8 30.5 4.2 5.0 55.5 10.0 24 PYC6042* 51.6 78.0 33.5 29.5 5.5 4.5 39.0 12.0 19 PYC6043* 66.6 90.5 39.0 36.0 5.5 4.5 44.0 12.0 25 PYC6044* 76.6 100.5 44.0 36.0 5.5 4.5 49.0 12.0 25 PYC6045* 91.6 115.5 51.5 36.0 5.5 4.5 56.5 12.0 25 H When using mounting clamps, care should be taken not to obscure any safety vent in the can. Delivered without bolts and nuts for mounting. *PYC clamps are for PEH169 and PEH200 capacitors only. Diameters include platic insulation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 3 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Mounting Data for Accessories M8 Nut M12 Nut Mounting Hole Maximum Chassis Thickness Creepage Distance Test Voltage 50 – 60 Hz Maximum Tightening Torque (mm) (mm) Minimum (mm) (mm) 1 min (KVAC) (NM) PYB7033 (M8) Ø < 36 Ø 17.5 5 4.5 2.5 3 PYB7026 (M12) Ø > 36 Ø 17.5 5 2.5 2.5 8 PYB7041 (M12) Ø > 36 Ø 22.5 5 5 2.5 8 PYB7042 (M12) Ø > 36 Ø 30.5 5 9 4 8 Part Code Capacitor Diameter A B C D E F G ±0.2 ±0.2 ±0.2 ±0.2 ±0.2 ±0.5 ±0.2 PYB7033 (M8) 17.0 19.5 25.3 16.8 1.0 14.9 5.7 PYB7026 (M12) 19.0 21.7 30.0 15.2 1.0 17.6 6.9 PYB7041 (M12) 19.0 21.7 30.0 15 1.5 18.0 7.0 PYB7042 (M12) 19.0 - 37.5 29.5 1.5 17.5 7.0 Part Code © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 4 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Resistors For voltage balancing and/or discharge of electrolytic capacitors Basic Design The PYR resistors are wire wound on a ceramic core and coated with high temperature silicone. The mounting brackets are made of stainless steel and connected by two point spot welding. øD ød øm B A S H L A L d m B H S D (mm) ±1 ±2 (mm) (mm) ±1 ±1 Maximum PYR5008 22* 40 10.6 6.3 21 15 0.4 10 PYR7511 32 50 10.6 6.3 21 15 0.4 10 Type *Brackets are adjustable up to A = 28.5 Part Number Resistance PMax (Watts) PMax (Watts) PMax (Watts) Capacitor Diameter (kΩ) 40°C 85°C 105°C (mm) PYR5008-47 47 10 8 7 50-65 PYR7511-10 10 13 11 10 75-90 PYR7511-18 18 13 11 10 75-90 PYR7511-27 27 13 11 10 75-90 PYR7511-47 47 13 11 10 75-90 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 5 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Steel Screws & Washers I Internal Toothed Washer External Toothed Washer B A B A M Slotted Hex N C Part Code Size (M) Description Screw Dimensions C Washer Dimensions I (mm) N (mm) Maximum Tightening Torque A B C 2641* M5 x 0.8 Steel Screw 10 8 2 - - - 3502* M6 x 1.0 Steel Screw 10 10 4 - - - 2348* M5 Internal Toothed Washer - - - 5.2 8.9 0.6 2358* M6 Internal Toothed Washer - - - 6.4 10.7 0.6 Kit Part Number 3895 (10 per bag) 3896 (20 per bag) 3897 (50 per bag) • • • • • • *Not sold separately, only sold in Kit © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 6 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) Steel Screws & Washers cont. I M N Part Code Size (M) Description 2645 M5 x 0.8 x 12 (mm) Screw with Captive Split Lock & Flat Washer Screw Dimensions I (mm) N (mm) 12 7.85 C A B Part Code Size (M) Description PYC7150 M5 Split Washer © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Washer Dimensions A B C 5.1 8.7 1.2 A4048_MOUNTING_KITS • 8/8/2023 7 Aluminum Electrolytic Capacitors – Accessories Mounting Kits – Hardware & Resistors for Aluminum Electrolytics (M8 & M12 Stud) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET requires its products to be packaged and shipped on pallets. This is because KEMET’s products are specifically designed to be packed onto pallets during shipment. If for any reason, the products are removed from pallets by the shipping party and shipped to the end customer, then additional external protection is required. In this instance, an external box with two carton layers and an upwards orientation sticker must be used by the shipping party, with the empty space filled with filling material, and afterwards sealing the box. If this packing and packaging guideline is not followed by the shipping party, the shipping party, and not KEMET, will be held responsible for any packaging, packing and/or product damages upon delivery of the products to the end customer. KEMET hereby disclaims any liability for damages to the products or otherwise that have been, or threaten to be, inflicted, result from or are in any way related to the packaging, packing or damage by the shipping party in contravention of the packing and packaging guidelines herein. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4048_MOUNTING_KITS • 8/8/2023 8