Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Overview
The KEMET Aluminum Organic Capacitor (AO-CAP)
is a solid state aluminum capacitor. The cathode is a
conductive organic polymer, which results in very low ESR
and improved capacitance retention at high frequency.
AO-CAPs may be operated at steady state voltages up to
100% of rated voltage without the need to de-rate.
Since there is no liquid electrolyte, the A700 offers long
operational lifetimes, low ESR, and high operational
temperatures. The inherent low ESR renders the A700
suitable for high ripple current handling. The small
package size, high ripple current capability, high operating
temperature, low parasistics, and high capacitance makes
the A700 ideal for high performance microprocessor, FPGA,
and ASIC decoupling designs.
Benefits
• ESR: 4.5 – 70 mΩ
• Polymer cathode technology
• Plus performance grade with extended life up to
3,000 hours at 125°C
• High frequency capacitance retention
• Non-ignition failure mode
• 100% accelerated steady state aging
• 100% surge current tested
• Volumetric efficiency
• Self-healing mechanism
• EIA standard case sizes
Applications
Typical applications include DC/DC converters, notebook PCs, telecommunications, displays, and industrial applications.
Environmental Compliance
• RoHS compliant when ordered with 100% Sn, Ni-Pd-Au or non-magnetic 100% Sn solder
• Halogen-free
• Epoxy compliant with UL94 V-0
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Built Into Tomorrow
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
1
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Ordering Information
A
700
V
476
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
D
Q
V
W
X
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
A=
Aluminum
700 =
Aluminum
Polymer
M
006
A
T
Capacitance Rated Voltage Failure Rate/ Termination
Tolerance
(VDC)
Design
Finish
M = ±20%
002 = 2
2R5 = 2.5
004 = 4
006 = 6.3
008 = 8
010 = 10
12R = 12.5
016 = 16
025 = 25
035 = 35
A = N/A
T = 100%
Matte Tin
(Sn)-plated
E018
ESR Code
Packaging
(C-Spec)
E = ESR
Blank = 7" Reel
Last three
7280 = 13" Reel
digits specify
ESR in mΩ
(018 = 18
mΩ)
A700 Plus Performance
A
700
V
477
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
V
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
A=
Aluminum
700 =
Aluminum
Polymer
M
002
P
Capacitance Rated Voltage Failure Rate/
Tolerance
(VDC)
Design
M = ±20%
002 = 2
P = Plus
Performance
(Extended
Life 3,000
hours/125°C)
T
E009
Termination
Finish
ESR Code
T = 100%
Matte Tin
(Sn)-plated
Packaging
(C-Spec)
E = ESR
Blank = 7" Reel
Last three
7280 = 13" Reel
digits specify
ESR in mΩ
(009 = 9 mΩ)
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
ESR (100 kHz)
Leakage Current
−55°C to 105°C/125°C (Refer to part number for maximum temperature rating)
6.8 – 560 µF at 120 Hz/25°C
M Tolerance (20%)
2 – 35 V
6%
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
If there is any concern about leakage current, please perform pre-conditioning to the part following
below conditions:
* Temperature: 105°C maximum
* Voltage: Rated Voltage
* Series Resistor: 1,000 Ω
* Charge Time: 1 hour minimum
* Measuring: Discharge the capacitor(s), store them for 4 to 24 hours at room temperature and RH ≤ 60%
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
2
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
105°C/125°C *2 at rated voltage, 2,000 hours*3
DF
≤ initial limit
DCL
Within 1.25 x initial limit
ESR
Within 2.0 x initial limit
Δ C/C
Storage Life
105°C/125°C *2 at 0 volts, 2,000 hours*3
Endurance Extended
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within 2.0 x initial limit
Storage Life Extended
Humidity
Temperature Stability
60°C, 90% RH, 1,000 hours, rated voltage 60°C, 90% RH,
500 hours, no Load
Extreme temperature exposure at a
succession of continuous steps at +25°C,
−55°C, +85°C, +105°C/+125°C *2
Within 2.0 x initial limit
DCL
Within 1.25 x initial limit
ESR
Within 2.0 x initial limit
Mechanical Shock/
Vibration
Within ±30%
DF
Within 2.0 x initial limit
DCL
Within 1.25 x initial limit
ESR
Within 2.0 x initial limit
Δ C/C
Within −5/+30%*5 of initial value
DF
≤ initial limit
DCL
Within 5.0 x initial limit
+25°C
−55°C
+85°C
+105°C/125°C
Δ C/C
IL*1
±15%
±15%
±20%
DF
IL
IL
1.2 x IL
1.5 x IL
DCL
IL
N/A
10 x IL
10 x IL
Δ C/C
Surge Voltage
Within ±30%
DF
Δ C/C
A700 Plus Performance
125°C at 0 Volts,
3,000 hours
Within ±10%*4 of initial value
DF
Δ C/C
A700 Plus Performance
125°C at rated voltage,
3,000 hours
Within ±10%*4 of initial value
105°C / 125°C *2, 1.32 x rated voltage,
33 Ω resistance, 1,000 cycles
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20 G peak
Within ±10% of initial value
*4
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
IL = Initial Limit
Refer to part number specifications for individual temperature classification
*3
For PN's: A700V337M002AT and A700V337M2R5AT test condition specification goes up to 1,000 hours
*4
For PN's: A700V337M002AT, A700V337M2R5AT, and A700V477M002AT capacitance change is within ± 20 of intial value
*5
For PN's: A700V337M002AT, A700V337M2R5AT, and A700V477M002AT capacitance change is within -30/+70% of intial value
*1
*2
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
3
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
A700V686M006ATE018_Imp
A700D157M006ATE015_Imp
A700X187M006ATE010_Imp
A700V686M006ATE018_ESR
A700D157M006ATE015_ESR
A700X187M006ATE010_ESR
10
1
100
Capacitance (µF)
Impedance, ESR (Ohms)
100
0.1
A700V686M006ATE018
10
A700D157M006ATE015
A700X187M006ATE010
0.01
0.001
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
1
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
SIDE VIEW
END VIEW
BOTTOM VIEW*
H
S
F
W
S
L
*Glue pad shape is at KEMET's option
Case Size
Typical
Weight
Component
KEMET
EIA
L
W
H
F ±0.1
±(0.004)
S ±0.3
±(0.012)
(mg)
D
7343–31
7.3±0.3
(0.287±0.012)
4.3±0.3
(0.169±0.012)
2.8±0.3
(0.110±0.012)
2.4
(0.094)
1.3
(0.051)
196.58
V
7343–20
7.3±0.3
(0.287±0.012)
4.3±0.3
(0.169±0.012)
2.0 (0.079)
Maximum*
2.4
(0.094)
1.3
(0.051)
132.72
W
7343–15
7.3±0.3
(0.287±0.012)
4.3±0.3
(0.169±0.012)
1.4±0.1
(0.055±0.004)
2.4
(0.094)
1.3
(0.051)
305.03
Q
7343–12
7.3±0.3
(0.287±0.012)
4.3±0.3
(0.169±0.012)
1.1±0.1
(0.043±0.004)
2.4
(0.094)
1.3
(0.051)
–
X
7343–43
7.3±0.3
(0.287±0.012)
4.3±0.3
(0.169±0.012)
4.0±0.3
(0.157±0.012)
2.4
(0.094)
1.3
(0.051)
305.03
Notes: (Ref) – Dimensions provided for reference only.
* Maximum Height is 2.1 for A700V477M002AT/A700V337M2R5AT
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
4
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
100
100
100
100
150
150
150
150
180
180
220
220
220
220
220
220
220
220
220
220
270
270
270
330
330
330
330
330
330
330
330
390
390
470
470
470
470
470
470
470
470
470
470
560
560
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
Q/7343-12
W/7343-15
W/7343-15
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
A700V107M002ATE016
A700V107M002ATE018
A700V107M002ATE025
A700V107M002ATE028
A700V157M002ATE015
A700V157M002ATE018
A700V157M002ATE025
A700V157M002ATE028
A700D187M002ATE015
A700D187M002ATE018
A700Q227M002ATE009
A700W227M002ATE006
A700W227M002ATE009
A700V227M002ATE009
A700V227M002ATE015
A700V227M002ATE018
A700D227M002ATE009
A700D227M002ATE012
A700D227M002ATE015
A700D227M002ATE018
A700X277M002ATE010
A700X277M002ATE012
A700X277M002ATE015
A700V337M002ATE4R5
A700V337M002ATE006
A700V337M002ATE009
A700D337M002ATE007
A700D337M002ATE009
A700D337M002ATE012
A700X337M002ATE010
A700X337M002ATE015
A700X397M002ATE010
A700X397M002ATE015
A700V477M002ATE4R5
A700V477M002ATE006
A700V477M002ATE009
A700V477M002PTE009
A700D477M002ATE005
A700D477M002ATE006
A700X477M002ATE005
A700X477M002ATE007
A700X477M002ATE010
A700X477M002ATE015
A700X567M002ATE4R5
A700X567M002ATE005
12
12
12
12
18
18
18
18
22
22
44
26
26
26
26
26
26
26
26
26
32
32
32
40
40
40
40
40
40
40
40
47
47
56
56
56
56
56
56
56
56
56
56
67
67
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
16
18
25
28
15
18
25
28
15
18
9
6
9
9
15
18
9
12
15
18
10
12
15
4.5
6
9
7
9
12
10
15
10
15
4.5
6
9
9
5
6
5
7
10
15
4.5
5
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple
Current
(rms)
MSL
mA at 100 kHz
Temp
with/T = +20°C at Reflow
≤ 260°C
−55°C to 125°C
4,100
3,900
3,300
3,100
4,200
3,900
3,300
3,100
4,100
3,700
5,900
6,900
5,700
5,500
4,200
3,900
5,300
4,600
4,100
3,700
4,700
4,300
3,900
7,750
6,700
5,500
6,000
5,300
4,600
4,700
3,900
4,700
3,900
7,750
6,700
5,500
5,500
7,100
6,500
6,700
5,700
4,700
3,900
7,000
6,700
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mA at 100 kHz Reflow Temp
with/T = +20°C at
≤ 260°C
−55°C to 125°C
Ripple Current
MSL
Maximum
Operating
Temp.
°C
125
125
125
125
125
125
125
125
125
125
105
105
105
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
°C
Maximum
Operating
Temp.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
5
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4
4
4
4
4
560
560
68
68
82
82
82
100
100
100
120
120
150
150
180
180
180
180
180
220
220
220
220
220
220
330
330
330
330
330
470
470
470
470
470
470
470
560
560
560
68
68
82
82
82
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
Q/7343-12
W/7343-15
W/7343-15
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
A700X567M002ATE006
A700X567M002ATE009
A700V686M2R5ATE020
A700V686M2R5ATE028
A700V826M2R5ATE018
A700V826M2R5ATE025
A700V826M2R5ATE028
A700D107M2R5ATE018
A700D107M2R5ATE025
A700D107M2R5ATE028
A700D127M2R5ATE015
A700D127M2R5ATE018
A700D157M2R5ATE015
A700D157M2R5ATE018
A700D187M2R5ATE015
A700D187M2R5ATE018
A700X187M2R5ATE010
A700X187M2R5ATE015
A700X187M2R5ATE018
A700Q227M2R5ATE009
A700W227M2R5ATE006
A700W227M2R5ATE009
A700X227M2R5ATE009
A700X227M2R5ATE010
A700X227M2R5ATE015
A700V337M2R5ATE4R5
A700V337M2R5ATE006
A700V337M2R5ATE009
A700X337M2R5ATE010
A700X337M2R5ATE015
A700V477M2R5ATE4R5
A700V477M2R5ATE006
A700V477M2R5ATE009
A700X477M2R5ATE005
A700X477M2R5ATE007
A700X477M2R5ATE010
A700X477M2R5ATE015
A700X567M2R5ATE4R5
A700X567M2R5ATE006
A700X567M2R5ATE009
A700V686M004ATE020
A700V686M004ATE028
A700V826M004ATE016
A700V826M004ATE018
A700V826M004ATE025
67
67
10
10
12
12
12
15
15
15
18
18
23
23
27
27
27
27
27
55
33
33
33
33
33
50
50
50
50
50
70.5
70.5
70.5
70
70
70
70
84
84
84
16
16
20
20
20
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
9
20
28
18
25
28
18
25
28
15
18
15
18
15
18
10
15
18
9
6
9
9
10
15
4.5
6
9
10
15
4.5
6
9
5
7
10
15
4.5
6
9
20
28
16
18
25
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple
Current
(rms)
MSL
mA at 100 kHz
Temp
with/T = +20°C at Reflow
≤ 260°C
−55°C to 125°C
6,100
5,000
3,700
3,100
3,900
3,300
3,100
3,700
3,200
3,000
4,100
3,700
4,100
3,700
4,100
3,700
4,700
3,900
3,500
5,900
6,900
5,700
5,000
4,700
3,900
7,750
6,700
5,500
4,700
3,900
7,750
6,700
5,480
6,700
5,700
4,700
3,900
7,000
6,100
5,000
3,700
3,100
4,100
3,900
3,300
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mA at 100 kHz Reflow Temp
with/T = +20°C at
≤ 260°C
−55°C to 125°C
Ripple Current
MSL
Maximum
Operating
Temp.
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
105
105
105
125
125
125
125
125
125
125
125
105
105
105
125
125
125
125
125
125
125
125
125
125
125
125
°C
Maximum
Operating
Temp.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
6
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
82
100
100
100
100
100
120
120
150
150
150
150
150
180
180
180
180
180
180
220
220
220
220
220
220
270
270
330
330
330
10
22
22
33
33
33
47
47
47
56
56
56
68
68
68
V/7343-20
D/7343-31
D/7343-31
D/7343-31
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
A700V826M004ATE028
A700D107M004ATE018
A700D107M004ATE025
A700D107M004ATE028
A700V107M004ATE025
A700V107M004ATE028
A700D127M004ATE015
A700D127M004ATE018
A700D157M004ATE015
A700D157M004ATE018
A700V157M004ATE015
A700V157M004ATE016
A700V157M004ATE018
A700D187M004ATE012
A700D187M004ATE015
A700D187M004ATE018
A700X187M004ATE010
A700X187M004ATE015
A700X187M004ATE018
A700D227M004ATE009
A700D227M004ATE010
A700D227M004ATE015
A700X227M004ATE009
A700X227M004ATE010
A700X227M004ATE015
A700X277M004ATE010
A700X277M004ATE015
A700X337M004ATE008
A700X337M004ATE010
A700X337M004ATE015
A700V106M006ATE055
A700V226M006ATE028
A700V226M006ATE045
A700V336M006ATE018
A700V336M006ATE025
A700V336M006ATE028
A700V476M006ATE018
A700V476M006ATE025
A700V476M006ATE028
A700V566M006ATE018
A700V566M006ATE025
A700V566M006ATE028
A700V686M006ATE015
A700V686M006ATE018
A700V686M006ATE025
20
24
24
24
24
24
29
29
36
36
36
36
36
43
43
43
43
43
43
53
53
53
53
53
53
65
65
79
79
79
3
6
6
8
8
8
12
12
12
14
14
14
17
17
17
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
28
18
25
28
25
28
15
18
15
18
15
16
18
12
15
18
10
15
18
9
10
15
9
10
15
10
15
8
10
15
55
28
45
18
25
28
18
25
28
18
25
28
15
18
25
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple
Current
(rms)
MSL
mA at 100 kHz
Temp
with/T = +20°C at Reflow
≤ 260°C
−55°C to 125°C
3,100
3,700
3,200
3,000
3,300
3,100
4,100
3,700
4,100
3,700
4,200
4,100
3,900
4,600
4,100
3,700
4,700
3,900
3,500
5,300
5,000
4,100
5,000
4,700
3,900
4,700
3,900
5,300
4,700
3,900
2,200
3,100
2,400
3,900
3,300
3,100
3,900
3,300
3,100
3,900
3,300
3,100
4,200
3,900
3,300
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mA at 100 kHz Reflow Temp
with/T = +20°C at
≤ 260°C
−55°C to 125°C
Ripple Current
MSL
Maximum
Operating
Temp.
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
°C
Maximum
Operating
Temp.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
7
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
68
82
82
82
100
100
100
100
100
120
120
120
150
150
150
150
150
150
180
180
180
180
220
220
220
10
22
22
33
33
33
56
56
68
68
100
100
100
10
22
22
33
33
33
47
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
A700V686M006ATE028
A700V826M006ATE018
A700V826M006ATE025
A700V826M006ATE028
A700V107M006ATE015
A700V107M006ATE018
A700V107M006ATE025
A700D107M006ATE015
A700D107M006ATE018
A700D127M006ATE012
A700D127M006ATE015
A700D127M006ATE018
A700D157M006ATE010
A700D157M006ATE012
A700D157M006ATE015
A700X157M006ATE010
A700X157M006ATE012
A700X157M006ATE015
A700D187M006ATE010
A700D187M006ATE015
A700X187M006ATE010
A700X187M006ATE015
A700X227M006ATE007
A700X227M006ATE010
A700X227M006ATE015
A700V106M008ATE055
A700V226M008ATE028
A700V226M008ATE045
A700V336M008ATE018
A700V336M008ATE025
A700V336M008ATE028
A700D566M008ATE015
A700D566M008ATE018
A700D686M008ATE015
A700D686M008ATE018
A700X107M008ATE010
A700X107M008ATE012
A700X107M008ATE015
A700V106M010ATE055
A700V226M010ATE028
A700V226M010ATE045
A700V336M010ATE018
A700V336M010ATE025
A700V336M010ATE028
A700V476M010ATE025
17
21
21
21
25
25
25
25
25
30
30
30
38
38
38
38
38
38
45
45
45
45
55
55
55
3
7
7
11
11
11
18
18
22
22
32
32
32
4
9
9
13
13
13
19
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
28
18
25
28
15
18
25
15
18
12
15
18
10
12
15
10
12
15
10
15
10
15
7
10
15
55
28
45
18
25
28
15
18
15
18
10
12
15
55
28
45
18
25
28
25
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple
Current
(rms)
MSL
mA at 100 kHz
Temp
with/T = +20°C at Reflow
≤ 260°C
−55°C to 125°C
3,100
3,900
3,300
3,100
4,200
3,900
3,300
4,100
3,700
4,600
4,100
3,700
5,000
4,600
4,100
4,700
4,300
3,900
5,000
4100
4,700
3,900
5,700
4,700
3,900
2,200
3,100
2,400
3,900
3,300
3,100
4,100
3,700
4,100
3,700
4,700
4,300
3,900
2,200
3,100
2,400
3,900
3,300
3,100
3,300
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mA at 100 kHz Reflow Temp
with/T = +20°C at
≤ 260°C
−55°C to 125°C
Ripple Current
MSL
Maximum
Operating
Temp.
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
°C
Maximum
Operating
Temp.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
8
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
10
10
10
10
10
10
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
16
16
16
16
16
16
16
16
16
16
16
16
16
25
35
35
35
47
56
56
68
68
100
100
120
120
150
150
10
10
10
15
15
22
33
56
47
47
47
100
100
100
100
6.8
8.2
10
10
15
22
22
22
22
22
22
33
33
15
15
22
22
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
V/7343-20
V/7343-20
V/7343-20
D/7343-31
X/7343-43
X/7343-43
A700V476M010ATE028
A700D566M010ATE015
A700D566M010ATE018
A700D686M010ATE015
A700D686M010ATE018
A700X107M010ATE010
A700X107M010ATE015
A700X127M010ATE010
A700X127M010ATE015
A700X157M010ATE010
A700X157M010ATE015
A700V106M12RATE040
A700V106M12RATE055
A700V106M12RATE060
A700V156M12RATE040
A700V156M12RATE045
A700V226M12RATE030
A700V336M12RATE025
A700D566M12RATE020
A700D476M12RATE020
A700D476M12RATE025
A700D476M12RATE040
A700X107M12RATE012
A700X107M12RATE015
A700X107M12RATE018
A700X107M12RATE025
A700V685M016ATE070
A700V825M016ATE045
A700V106M016ATE045
A700V106M016ATE060
A700V156M016ATE040
A700V226M016ATE018
A700V226M016ATE025
A700V226M016ATE030
A700D226M016ATE018
A700D226M016ATE025
A700D226M016ATE030
A700V336M016ATE025
A700V336M016ATE040
A700V156M025ATE040
A700D156M035ATE040
A700X226M035ATE025
A700X226M035ATE040
19
22
22
27
27
40
40
48
48
60
60
5
5
5
8
8
11
17
28
24
24
24
50
50
50
50
4
5
6
6
10
35
35
35
14
14
14
53
53
15
53
77
77
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
28
15
18
15
18
10
15
10
15
10
15
40
55
60
40
45
30
25
20
20
25
40
12
15
18
25
70
45
45
60
40
18
25
30
18
25
30
25
40
40
40
25
40
(V)
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple
Current
(rms)
MSL
mA at 100 kHz
Temp
with/T = +20°C at Reflow
≤ 260°C
−55°C to 125°C
3,100
4,100
3,700
4,100
3,700
4,700
3,900
4,700
3,900
4,700
3,900
2,600
2,200
2,100
2,600
2,400
3,000
3,300
3,500
3,500
3,200
2,500
4,300
3,900
3,500
3,000
2,000
2,400
2,400
2,100
2,600
3,900
3,300
3,000
3,700
3,200
2,900
3,300
2,600
2,600
2,500
3,000
2,400
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
mA at 100 kHz Reflow Temp
with/T = +20°C at
≤ 260°C
−55°C to 125°C
Ripple Current
MSL
Maximum
Operating
Temp.
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
°C
Maximum
Operating
Temp.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
9
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Derating Guidelines
Voltage Rating
Maximum
Recommended
Steady State
Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
−55°C to 125°C
2 – 35 V
VR
VR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria
1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified
for reverse voltage. See the Reverse Voltage section for allowable limits
Power capability is determined based on a 20°C temperature rise. A higher temperature rise and therefore higher power
capability is allowable as long as the ambient temperature plus temperature rise due to ripple current does not exceed the
rated temperature of the part.
The maximum power dissipation by case size can be determined using the below table.
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (Pmax)
mWatts at 25°C
with +20°C Rise
A700Q
A700W
A700V
A700D
A700X
7343-12
7343-15
7343-20
7343-31
7343-43
320
290
270
250
225
Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined.
I(max) = √Pmax/R
E(max) = Z √Pmax/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
Pmax = maximum power dissipation(watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (Ohms)
Refer to part number listings for permittable Arms limits.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
10
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Reverse Voltage
Polymer aluminum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong
polarity. These devices will withstand a certain degree of transient voltage reversal for short periods as shown in the below
table. Please note that these parts may not be operated continuously in reverse, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
85°C
125°C
60% of Rated Voltage
50% of Rated Voltage
40% of Rated Voltage
30% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Q
7343–12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1
Height of these chips may create problems in wave soldering.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
11
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Soldering Process
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall profile (4.3 mm maximum)
dictates care in wave process development.
Hand soldering should be performed with care due to the
difficulty in process control. If performed, care should be
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reflow occurs. Once reflow occurs, the iron should be
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
Profile Feature
SnPb Assembly
Pb-Free Assembly
100°C
150°C
Preheat/Soak
Temperature Minimum
(TSmin)
Temperature Maximum
(TSmax)
Time (ts) from Tsmin to Tsmax)
150°C
200°C
60 – 120 seconds
60 – 120 seconds
3°C/seconds maximum
Ramp-up Rate (TL to TP)
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
6 minutes maximum
8 minutes maximum
Time within 5°C
of Maximum Peak
Temperature (tP)
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
* For Case Size height > 2.5 mm
** For Case Size height ≤ 2.5 mm
TP
TL
Temperature
KEMET’s families of surface mount capacitors are
compatible with wave (single or dual), convection, IR,
or vapor phase reflow techniques. Preheating of these
components is recommended to avoid extreme thermal
stress. KEMET's recommended profile conditions for
convection and IR reflow reflect the profile conditions of the
IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3°C/second
Maximum Ramp Down Rate = 6°C/second
tL
Tsmax
Tsmin
25
ts
25°C to Peak
Time
Storage
All AO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These
parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per
IPC/JEDEC J–STD–033. MSL3 specifies a floor time of 168H at 30°C maximum temperature and 60% relative humidity.
Unused capacitors should be sealed in a MBB with fresh desiccant.
The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and
humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH.
If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
12
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Element Layer View
Silver
Polymer
(Third Layer) (First Layer)
Leadframe
(− Cathode)
Carbon
(Second Layer)
Aluminum
Leadframe
(+ Anode)
Silver Epoxy
Molded Epoxy
Case
Capacitor Marking
KEMET
Aluminum
Polymer
Polarity
Indicator (+)
Date Code *
1 digit = Last number of Year
9 = 2019
0 = 2020
1 = 2021
2 = 2022
3 = 2023
2nd and 3rd digit = Week of the
Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 205 = 5th week of 2022
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
13
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Right hand
orientation
only
(+)
Embossed carrier
(−)
Embossment
Top tape thickness
0.10 mm (0.004”)
maximum thickness
180 mm (7.0”) or
330 mm (13.”)
8 mm (0.315”) or
12 mm (0.472”)
Table 3 – Packaging Quantity
Case Code
KEMET
P
R
I
S
A
T
M
B
U
L
C
Q
W
Z
V
D
Y
X
J
H
O
EIA
2012-10
2012-12
3216-10
3216-12
3216-18
3528-12
3528-15
3528-21
6032-15
6032-19
6032-28
7343-12
7343-15
7343-17
7343-19
7343-31
7343-40
7343-43
7360-15
7360-20
7360-43
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
8
8
8
8
8
12
12
12
12
12
12
12
12
12
12
12
12
12
3,000
2,500
3,000
3,000
2,000
3,000
2,500
2,000
1,000
1,000
500
1,000
1,000
1,000
1,000
500
500
500
1,000
1,000
250
N/A
10,000
N/A
N/A
N/A
10,000
8,000
8,000
5,000
3,000
3,000
3,000
3,000
3,000
3,000
2,500
2,000
2,000
3,000
3,000
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
14
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØD0
P0
(10 pitches cumulative
tolerance on tape ±0.2 mm)
A0
E1
F
K0
B1
E2
B0
S1
W
P1
T1
Center Lines of Cavity
B1 is for tape feeder reference only,
including draft concentric about B0.
Embossment
For cavity size,
see Note 1, Table 4
ØD1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
D1 Minimum
Note 1
D0
1.5 +0.10/−0.0
(0.059 +0.004/−0.0)
1.0
(0.039)
1.5
(0.059)
E1
P0
R Reference S1 Minimum
T1
T Maximum
Note 2
Note 3
Maximum
P2
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
25.0
(0.984)
30
(1.181)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
B1 Maximum
Note 4
8 mm
Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
12 mm
Single (4 mm)
and Double
(8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
E2 Minimum
F
P1
T2 Maximum W Maximum A0, B0 & K0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
15
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Packaging Information Performance Notes
1. Cover tape break force: 1.0 kg minimum.
2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 newton (10 to 100 gf)
12 mm
0.1 to 1.3 newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8, 12
Bo
Maximum
Rotation (
20
°
T)
Typical Component Centerline
°
s
Tape
Maximum
Width (mm) Rotation (
8, 12
20
°
S)
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
R
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Bending
Radius
R
T2020_A700 • 12/5/2023
16
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3
(Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
W2
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
(Measured at hub)
W1
(Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/−0.2
(0.521 +0.02/−0.008)
20.2
(0.795)
12 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/−0.0
(0.331 +0.059/−0.0)
12.4 +2.0/−0.0
(0.488 +0.078/−0.0)
14.4
(0.567)
18.4
(0.724)
Shall accommodate tape
width without interference
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
17
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Punched Carrier
8 mm & 12 mm only
END
Carrier Tape
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm minimum
Components
100 mm
minimum Leader
400 mm minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated Sprocket Holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
18
Aluminum Organic Capacitor (AO-CAP)
A700 Polymer Aluminum, 2 – 35 VDC
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight.
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2020_A700 • 12/5/2023
19
工商网监
湘ICP备2023018690号
