A700D157M2R5ATE015

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Overview The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid state aluminum capacitor. The cathode is a conductive organic polymer, which results in very low ESR and improved capacitance retention at high frequency. AO-CAPs may be operated at steady state voltages up to 100% of rated voltage without the need to de-rate. Since there is no liquid electrolyte, the A700 offers long operational lifetimes, low ESR, and high operational temperatures. The inherent low ESR renders the A700 suitable for high ripple current handling. The small package size, high ripple current capability, high operating temperature, low parasistics, and high capacitance makes the A700 ideal for high performance microprocessor, FPGA, and ASIC decoupling designs. Benefits • ESR: 4.5 – 70 mΩ • Polymer cathode technology • High frequency capacitance retention • Non-ignition failure mode • 100% accelerated steady state aging • 100% surge current tested • Volumetric efficiency • Self-healing mechanism • EIA standard case sizes Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Typical applications include DC/DC converters, notebook PCs, telecommunications, displays, and industrial applications. Environmental Compliance • RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn, Ni-Pd-Au or non-magnetic 100% Sn solder • Halogen-free • Epoxy compliant with UL94 V-0 Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 1 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information A 700 V 476 Capacitor Class Series Case Size Capacitance Code (pF) D V W X First two digits represent significant figures. Third digit specifies number of zeros. A= Aluminum 700 = Aluminum Polymer M 006 A T Capacitance Rated Voltage Failure Rate/ Termination Tolerance (VDC) Design Finish M = ±20% 002 = 2 2R5 = 2.5 004 = 4 006 = 6.3 008 = 8 010 = 10 12R = 12.5 016 = 16 025 = 25 A = N/A T = 100% Matte Tin (Sn)-plated E018 ESR Code Packaging (C-Spec) E = ESR Blank = 7" Reel Last three 7280 = 13" Reel digits specify ESR in mΩ (018 = 18 mΩ) Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz) ESR (100 kHz) Leakage Current −55°C to 105°C/125°C (Refer to part number for maximum temperature rating) 6.8 – 560 µF at 120 Hz/25°C M Tolerance (20%) 2 – 25 V 6% Refer to Part Number Electrical Specification Table ≤ 4 V Rating: ≤ 0.06 CV (µA) at rated voltage after 5 minutes > 4 V Rating: ≤ 0.04 CV (µA) at rated voltage after 5 minutes If there is any concern about leakage current, please perform pre-conditioning to the part following below conditions: * Temperature: 105°C maximum * Voltage: Rated Voltage * Series Resistor: 1,000 Ω * Charge Time: 1 hour minimum * Measuring: Discharge the capacitor(s), store them for 4 to 24 hours at room temperature and RH ≤ 60% © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 2 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Qualification Test Condition Characteristics Δ C/C Endurance 105°C/125°C *2 at rated voltage, 2,000 hours*3 DF ≤ initial limit DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Δ C/C Storage Life Humidity Temperature Stability 105°C/125°C *2 at 0 volts, 2,000 hours*3 60°C, 90% RH, 1,000 hours, rated voltage 60°C, 90% RH, 500 hours, no Load Extreme temperature exposure at a succession of continuous steps at +25°C, −55°C, +85°C, +105°C/+125°C *2 Mechanical Shock/ Vibration Within ±10%*4 of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Δ C/C Within −5/+30%*5 of initial value DF ≤ initial limit DCL Within 5.0 x initial limit +25°C −55°C +85°C +105°C/125°C Δ C/C IL ±15% ±15% ±20% DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL *1 Δ C/C Surge Voltage Within ±10%*4 of initial value 105°C / 125°C , 1.32 x rated voltage, 33 Ω resistance, 1,000 cycles *2 MIL–STD–202, Method 213, Condition I, 100 G peak MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within ±10% of initial value *4 DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits IL = Initial Limit Refer to part number specifications for individual temperature classification *3 For PN's: A700V337M002AT and A700V337M2R5AT test condition specification goes up to 1,000 hours *4 For PN's: A700V337M002AT, A700V337M2R5AT, and A700V477M002AT capacitance change is within ± 20 of intial value *5 For PN's: A700V337M002AT, A700V337M2R5AT, and A700V477M002AT capacitance change is within -30/+70% of intial value *1 *2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 3 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency A700V686M006ATE018_Imp A700D157M006ATE015_Imp A700X187M006ATE010_Imp A700V686M006ATE018_ESR A700D157M006ATE015_ESR A700X187M006ATE010_ESR 10 1 100 Capacitance (µF) Impedance, ESR (Ohms) 100 0.1 A700V686M006ATE018 10 A700D157M006ATE015 A700X187M006ATE010 0.01 0.001 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 1 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions – Millimeters (Inches) Metric will govern SIDE VIEW END VIEW BOTTOM VIEW* H S F W S L *Glue pad shape is at KEMET's option Case Size Typical Weight Component KEMET EIA L W H F ±0.1 ±(0.004) S ±0.3 ±(0.012) (mg) D 7343–31 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 2.8±0.3 (0.098±0.012) 2.4 (0.094) 1.3 (0.051) 196.58 V 7343–20 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 2.0 (0.079) Maximum* 2.4 (0.094) 1.3 (0.051) 132.72 W 7343–15 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 1.4±0.1 (0.055±0.004) 2.4 (0.094) 1.3 (0.051) 305.03 X 7343–43 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 4.0±0.3 (0.157±0.012) 2.4 (0.094) 1.3 (0.051) 305.03 Notes: (Ref) – Dimensions provided for reference only. * Maximum Height is 2.1 for A700V477M002AT/A700V337M2R5AT © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 4 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.5 100 100 100 100 150 150 150 150 180 180 220 220 220 220 220 220 220 220 220 270 270 270 330 330 330 330 330 330 330 330 390 390 470 470 470 470 470 470 470 470 560 560 560 560 68 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 W/7343-15 W/7343-15 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-21 V/7343-21 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-20 A700V107M002ATE016 A700V107M002ATE018 A700V107M002ATE025 A700V107M002ATE028 A700V157M002ATE015 A700V157M002ATE018 A700V157M002ATE025 A700V157M002ATE028 A700D187M002ATE015 A700D187M002ATE018 A700W227M002ATE006 A700W227M002ATE009 A700V227M002ATE009 A700V227M002ATE015 A700V227M002ATE018 A700D227M002ATE009 A700D227M002ATE012 A700D227M002ATE015 A700D227M002ATE018 A700X277M002ATE010 A700X277M002ATE012 A700X277M002ATE015 A700V337M002ATE4R5 A700V337M002ATE006 A700V337M002ATE009 A700D337M002ATE007 A700D337M002ATE009 A700D337M002ATE012 A700X337M002ATE010 A700X337M002ATE015 A700X397M002ATE010 A700X397M002ATE015 A700V477M002ATE4R5 A700V477M002ATE006 A700D477M002ATE005 A700D477M002ATE006 A700X477M002ATE005 A700X477M002ATE007 A700X477M002ATE010 A700X477M002ATE015 A700X567M002ATE4R5 A700X567M002ATE005 A700X567M002ATE006 A700X567M002ATE009 A700V686M2R5ATE020 12 12 12 12 18 18 18 18 22 22 26 26 26 26 26 26 26 26 26 32 32 32 40 40 40 40 40 40 40 40 47 47 56 56 56 56 56 56 56 56 67 67 67 67 10 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 16 18 25 28 15 18 25 28 15 18 6 9 9 15 18 9 12 15 18 10 12 15 4.5 6 9 7 9 12 10 15 10 15 4.5 6 5 6 5 7 10 15 4.5 5 6 9 20 VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Ripple Current (rms) MSL mA at 100 kHz Temp with/T = +20°C at Reflow ≤ 260°C −55°C to 125°C 4,100 3,900 3,300 3,100 4,200 3,900 3,300 3,100 4,100 3,700 6,900 5,700 5,500 4,200 3,900 5,300 4,600 4,100 3,700 4,700 4,300 3,900 7,750 6,700 5,500 6,000 5,300 4,600 4,700 3,900 4,700 3,900 7,750 6,700 7,100 6,500 6,700 5,700 4,700 3,900 7,000 6,700 6,100 5,000 3,700 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 mA at 100 kHz Reflow Temp with/T = +20°C at ≤ 260°C −55°C to 125°C Ripple Current MSL Maximum Operating Temp. °C 125 125 125 125 125 125 125 125 125 125 105 105 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 105 105 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 5 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4 4 4 4 68 82 82 82 100 100 100 120 120 150 150 180 180 180 180 180 220 220 220 220 220 330 330 330 330 330 470 470 470 470 560 560 560 68 68 82 82 82 82 100 100 100 100 100 120 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 W/7343-15 W/7343-15 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 A700V686M2R5ATE028 A700V826M2R5ATE018 A700V826M2R5ATE025 A700V826M2R5ATE028 A700D107M2R5ATE018 A700D107M2R5ATE025 A700D107M2R5ATE028 A700D127M2R5ATE015 A700D127M2R5ATE018 A700D157M2R5ATE015 A700D157M2R5ATE018 A700D187M2R5ATE015 A700D187M2R5ATE018 A700X187M2R5ATE010 A700X187M2R5ATE015 A700X187M2R5ATE018 A700W227M2R5ATE006 A700W227M2R5ATE009 A700X227M2R5ATE009 A700X227M2R5ATE010 A700X227M2R5ATE015 A700V337M2R5ATE4R5 A700V337M2R5ATE006 A700V337M2R5ATE009 A700X337M2R5ATE010 A700X337M2R5ATE015 A700X477M2R5ATE005 A700X477M2R5ATE007 A700X477M2R5ATE010 A700X477M2R5ATE015 A700X567M2R5ATE4R5 A700X567M2R5ATE006 A700X567M2R5ATE009 A700V686M004ATE020 A700V686M004ATE028 A700V826M004ATE016 A700V826M004ATE018 A700V826M004ATE025 A700V826M004ATE028 A700D107M004ATE018 A700D107M004ATE025 A700D107M004ATE028 A700V107M004ATE025 A700V107M004ATE028 A700D127M004ATE015 10 12 12 12 15 15 15 18 18 23 23 27 27 27 27 27 33 33 33 33 33 50 50 50 50 50 70 70 70 70 84 84 84 16 16 20 20 20 20 24 24 24 24 24 29 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 28 18 25 28 18 25 28 15 18 15 18 15 18 10 15 18 6 9 9 10 15 4.5 6 9 10 15 5 7 10 15 4.5 6 9 20 28 16 18 25 28 18 25 28 25 28 15 VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Ripple Current (rms) MSL mA at 100 kHz Temp with/T = +20°C at Reflow ≤ 260°C −55°C to 125°C 3,100 3,900 3,300 3,100 3,700 3,200 3,000 4,100 3,700 4,100 3,700 4,100 3,700 4,700 3,900 3,500 6,900 5,700 5,000 4,700 3,900 7,750 6,700 5,500 4,700 3,900 6,700 5,700 4,700 3,900 7,000 6,100 5,000 3,700 3,100 4,100 3,900 3,300 3,100 3,700 3,200 3,000 3,300 3,100 4,100 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 mA at 100 kHz Reflow Temp with/T = +20°C at ≤ 260°C −55°C to 125°C Ripple Current MSL Maximum Operating Temp. °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 105 105 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 6 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 120 150 150 150 150 150 180 180 180 180 180 180 220 220 220 220 220 220 270 270 330 330 330 10 22 22 33 33 33 47 47 47 56 56 56 68 68 68 68 82 82 82 100 100 100 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 A700D127M004ATE018 A700D157M004ATE015 A700D157M004ATE018 A700V157M004ATE015 A700V157M004ATE016 A700V157M004ATE018 A700D187M004ATE012 A700D187M004ATE015 A700D187M004ATE018 A700X187M004ATE010 A700X187M004ATE015 A700X187M004ATE018 A700D227M004ATE009 A700D227M004ATE010 A700D227M004ATE015 A700X227M004ATE009 A700X227M004ATE010 A700X227M004ATE015 A700X277M004ATE010 A700X277M004ATE015 A700X337M004ATE008 A700X337M004ATE010 A700X337M004ATE015 A700V106M006ATE055 A700V226M006ATE028 A700V226M006ATE045 A700V336M006ATE018 A700V336M006ATE025 A700V336M006ATE028 A700V476M006ATE018 A700V476M006ATE025 A700V476M006ATE028 A700V566M006ATE018 A700V566M006ATE025 A700V566M006ATE028 A700V686M006ATE015 A700V686M006ATE018 A700V686M006ATE025 A700V686M006ATE028 A700V826M006ATE018 A700V826M006ATE025 A700V826M006ATE028 A700V107M006ATE015 A700V107M006ATE018 A700V107M006ATE025 29 36 36 36 36 36 43 43 43 43 43 43 53 53 53 53 53 53 65 65 79 79 79 3 6 6 8 8 8 12 12 12 14 14 14 17 17 17 17 21 21 21 25 25 25 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 18 15 18 15 16 18 12 15 18 10 15 18 9 10 15 9 10 15 10 15 8 10 15 55 28 45 18 25 28 18 25 28 18 25 28 15 18 25 28 18 25 28 15 18 25 VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Ripple Current (rms) MSL mA at 100 kHz Temp with/T = +20°C at Reflow ≤ 260°C −55°C to 125°C 3,700 4,100 3,700 4,200 4,100 3,900 4,600 4,100 3,700 4,700 3,900 3,500 5,300 5,000 4,100 5,000 4,700 3,900 4,700 3,900 5,300 4,700 3,900 2,200 3,100 2,400 3,900 3,300 3,100 3,900 3,300 3,100 3,900 3,300 3,100 4,200 3,900 3,300 3,100 3,900 3,300 3,100 4,200 3,900 3,300 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 mA at 100 kHz Reflow Temp with/T = +20°C at ≤ 260°C −55°C to 125°C Ripple Current MSL Maximum Operating Temp. °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 7 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 100 100 120 120 120 150 150 150 150 150 150 180 180 180 180 220 220 220 10 22 22 33 33 33 56 56 68 68 100 100 100 10 22 22 33 33 33 47 47 56 56 68 68 100 100 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 A700D107M006ATE015 A700D107M006ATE018 A700D127M006ATE012 A700D127M006ATE015 A700D127M006ATE018 A700D157M006ATE010 A700D157M006ATE012 A700D157M006ATE015 A700X157M006ATE010 A700X157M006ATE012 A700X157M006ATE015 A700D187M006ATE010 A700D187M006ATE015 A700X187M006ATE010 A700X187M006ATE015 A700X227M006ATE007 A700X227M006ATE010 A700X227M006ATE015 A700V106M008ATE055 A700V226M008ATE028 A700V226M008ATE045 A700V336M008ATE018 A700V336M008ATE025 A700V336M008ATE028 A700D566M008ATE015 A700D566M008ATE018 A700D686M008ATE015 A700D686M008ATE018 A700X107M008ATE010 A700X107M008ATE012 A700X107M008ATE015 A700V106M010ATE055 A700V226M010ATE028 A700V226M010ATE045 A700V336M010ATE018 A700V336M010ATE025 A700V336M010ATE028 A700V476M010ATE025 A700V476M010ATE028 A700D566M010ATE015 A700D566M010ATE018 A700D686M010ATE015 A700D686M010ATE018 A700X107M010ATE010 A700X107M010ATE015 25 25 30 30 30 38 38 38 38 38 38 45 45 45 45 55 55 55 3 7 7 11 11 11 18 18 22 22 32 32 32 4 9 9 13 13 13 19 19 22 22 27 27 40 40 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 15 18 12 15 18 10 12 15 10 12 15 10 15 10 15 7 10 15 55 28 45 18 25 28 15 18 15 18 10 12 15 55 28 45 18 25 28 25 28 15 18 15 18 10 15 VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Ripple Current (rms) MSL mA at 100 kHz Temp with/T = +20°C at Reflow ≤ 260°C −55°C to 125°C 4,100 3,700 4,600 4,100 3,700 5,000 4,600 4,100 4,700 4,300 3,900 5,000 4100 4,700 3,900 5,700 4,700 3,900 2,200 3,100 2,400 3,900 3,300 3,100 4,100 3,700 4,100 3,700 4,700 4,300 3,900 2,200 3,100 2,400 3,900 3,300 3,100 3,300 3,100 4,100 3,700 4,100 3,700 4,700 3,900 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 mA at 100 kHz Reflow Temp with/T = +20°C at ≤ 260°C −55°C to 125°C Ripple Current MSL Maximum Operating Temp. °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 8 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum 10 10 10 10 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 16 16 16 16 16 16 16 16 25 120 120 150 150 10 10 10 15 15 22 33 56 47 47 47 100 100 100 100 6.8 8.2 10 10 15 22 22 22 15 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 V/7343-20 A700X127M010ATE010 A700X127M010ATE015 A700X157M010ATE010 A700X157M010ATE015 A700V106M12RATE040 A700V106M12RATE055 A700V106M12RATE060 A700V156M12RATE040 A700V156M12RATE045 A700V226M12RATE030 A700V336M12RATE025 A700D566M12RATE020 A700D476M12RATE020 A700D476M12RATE025 A700D476M12RATE040 A700X107M12RATE012 A700X107M12RATE015 A700X107M12RATE018 A700X107M12RATE025 A700V685M016ATE070 A700V825M016ATE045 A700V106M016ATE045 A700V106M016ATE060 A700V156M016ATE040 A700D226M016ATE018 A700D226M016ATE025 A700D226M016ATE030 A700V156M025ATE040 48 48 60 60 5 5 5 8 8 11 17 28 24 24 24 50 50 50 50 4 5 6 6 10 14 14 14 15 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 15 10 15 40 55 60 40 45 30 25 20 20 25 40 12 15 18 25 70 45 45 60 40 18 25 30 40 VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Ripple Current (rms) MSL mA at 100 kHz Temp with/T = +20°C at Reflow ≤ 260°C −55°C to 125°C 4,700 3,900 4,700 3,900 2,600 2,200 2,100 2,600 2,400 3,000 3,300 3,500 3,500 3,200 2,500 4,300 3,900 3,500 3,000 2,000 2,400 2,400 2,100 2,600 3,700 3,200 2,900 2,600 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 mA at 100 kHz Reflow Temp with/T = +20°C at ≤ 260°C −55°C to 125°C Ripple Current MSL Maximum Operating Temp. °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 9 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Derating Guidelines Voltage Rating Maximum Recommended Steady State Voltage Maximum Recommended Transient Voltage (1 ms – 1 µs) −55°C to 125°C 2 – 25 V VR VR VR = Rated Voltage Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits Power capability is determined based on a 20°C temperature rise. A higher temperature rise and therefore higher power capability is allowable as long as the ambient temperature plus temperature rise due to ripple current does not exceed the rated temperature of the part. The maximum power dissipation by case size can be determined using the below table. KEMET Series and Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 25°C with +20°C Rise A700W A700V A700D A700X 7343-15 7343-20 7343-31 7343-43 290 270 250 225 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax/R E(max) = Z √Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (Ohms) Refer to part number listings for permittable Arms limits. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 10 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Reverse Voltage Polymer aluminum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a certain degree of transient voltage reversal for short periods as shown in the below table. Please note that these parts may not be operated continuously in reverse, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 55°C 85°C 125°C 60% of Rated Voltage 50% of Rated Voltage 40% of Rated Voltage 30% of Rated Voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 V 7343–20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 W 7343–15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 1 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 11 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly 100°C 150°C Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (ts) from Tsmin to Tsmax) 150°C 200°C 60 – 120 seconds 60 – 120 seconds 3°C/seconds maximum Ramp-up Rate (TL to TP) 3°C/seconds maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 60 – 150 seconds Peak Temperature (TP) 220°C* 235°C** 250°C* 260°C** 20 seconds maximum 30 seconds maximum 6°C/seconds maximum 6°C/seconds maximum 6 minutes maximum 8 minutes maximum Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25°C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Storage All AO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per IPC/JEDEC J–STD–033. MSL3 specifies a floor time of 168H at 30°C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH. If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 12 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Construction Polarity Stripe (+) Molded Epoxy Case Detailed Element Layer View Silver Polymer (Third Layer) (First Layer) Leadframe (− Cathode) Carbon (Second Layer) Aluminum Leadframe (+ Anode) Silver Epoxy Molded Epoxy Case Capacitor Marking KEMET Aluminum Polymer Polarity Indicator (+) Date Code * 1 digit = Last number of Year 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 =2019 0 = 2020 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st Picofarad Code KEMET ID Rated Voltage Date Code* * 913 = 13th week of 2019 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 13 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) 8 mm (0.315”) or 12 mm (0.472”) Table 3 – Packaging Quantity Case Code KEMET P R I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 3,000 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A N/A N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 14 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 ØD1 Cover Tape User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) or 5.5 ±0.05 4.0 ±0.10 (0.157 ±0.004) or (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 15 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 ° T) ° s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline ° S) Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 and 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bending Radius R T2020_A700 • 2/10/2021 16 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 17 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 and 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm and wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 18 Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2020_A700 • 2/10/2021 19