ARR06B105JGS

Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Overview KEMET’s High Temperature A Series radial ceramic cased capacitors are designed with C0G and X7R dielectrics which feature a 200°C maximum operating temperature and patented C3 technology which eliminates potential problems associated with conventional epoxy cased/ potted capacitors. These devices are ideal for power supplies, DC/DC conversion and well suited for timing, resonant, bypass, and decoupling applications. These capacitors are widely used in industries related to semiconductors, telecommunications, test/diagnostic equipment and power/grid. Benefits • Operating temperature range of −55°C to +200°C • High shock and vibration capability • Capacitance range from 100 pF – 3.9 µF in X7R • Capacitance range from 5.6 pF – 0.15 µF in C0G • DC voltage ratings of 50 V and 100 V • High thermal stability • Encapsulation meets flammability standard UL 94 V–0 Applications • Downhole exploration and mining • Aerospace engine compartments • Electric ballast • Measuring equipment • Inverter power supply Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 1 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Ordering Information A C R 06 B 103 K G S Series Dielectric Lead Configuration Style/ Size Voltage Rating Cap. Code Capacitance Tolerance1 Lead Wire Barrier Layer 2 Test Level Packaging A = Axial R = Radial Axial: 16 25 39 50 69 Radial: 05 06 07 08 09 A = 25 V B = 50 V D = 100 V S = Special S = KEMET standard screening A = MIL-PRF-20, Group A Test (C0G) A = MIL-PRF-39014 (X7R) X = Special Blank = Waffle Tray A = High C = C0G Temperature R = X7R Axial and Radial Capacitors 1 2 Two significant digits and number of zeros J = ±5% K = ±10% M = ±20% G = Gold coated W = Solder coated Additional capacitance tolerance offerings may be available. Contact KEMET for details. Please refer to the Construction section in the datasheet. Dimensions – Inches (Millimeters) Axial Radial W L 0.60 Maximum L D W T 0.60 Maximum T 1.25 Minimum D S Series Lead Configuration Axial A Radial Style/ Size Length (L) Width (W) Thickness (T) 16 0.170 (4.32) 0.080 (2.03) 0.080 (2.03) 25 0.270 (6.86) 0.100 (2.54) 0.100 (2.54) Lead Diameter (F) Lead Spacing ±0.030 (S) 0.020 ±0.002 (0.508 ±0.051) 39 0.400 (10.16) 0.150 (3.81) 0.150 (3.81) 50 0.520 (13.21) 0.265 (6.73) 0.160 (4.06) 69 0.720 (18.29) 0.370 (9.40) 0.160 (4.06) 05 0.200 (5.08) 0.200 (5.08) 0.100 (2.54) 0.200 ±0.030 (5.08 ±0.76) 06 0.300 (7.62) 0.300 (7.62) 0.100 (2.54) 0.200 ±0.030 (5.08 ±0.76) 0.025 ±0.002 (0.635 ±0.051) 07 0.300 (7.62) 0.300 (7.62) 0.150 (3.81) 0.200 ±0.030 (5.08 ±0.76) 08 0.500 (12.70) 0.500 (12.70) 0.100 (2.54) 0.400 ±0.030 (10.16 ±0.76) 09 0.500 (12.70) 0.500 (12.70) 0.150 (3.81) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Lead Length Minimum (LL) 0.125 (3.175) 0.020 ±0.002 (0.508 ±0.051) 0.025 ±0.002 0.400 ±0.030 (10.16 ±0.76) (0.635 ±0.051) C1118_A-SERIES • 11/19/2021 2 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Table 1A – A Series C0G Waterfall Type AXIAL (ACA) 16 Style Style Type 16 50 25 69 39 05 06 50 Axial (ACA) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 69 07 08 09 05 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 06 07 08 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X 50 X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X 50 100 50 100 X X X X X X X X X X X X X X X X X X X X X X X X 100 Capacitance X X X X X X X X X X X X X X X X X X X X X X X X 50 569 689 829 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 Capacitance Code 100 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1,000 pF 1,200 pF 1,500 pF 1,800 pF 2,200 pF 2,700 pF 3,300 pF 3,900 pF 4,700 pF 5,600 pF 6,800 pF 8,200 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 56,000 pF 68,000 pF 82,000 pF 0.1 uF 0.12 uF 0.15 uF 50 Capacitance Code 39 Voltage 50 Capacitance 25 RADIAL (ACR) 09 Radial (ACR) C1118_A-SERIES • 11/19/2021 3 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Table 1B – A Series X7R Waterfall Type AXIAL (ARA) 16 Style Style Type 50 16 25 69 39 05 06 50 Axial (ARA) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 69 07 08 05 09 06 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 08 100 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 07 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 50 X X X X X X X X X X X X X X X X X X X X X X X X X X X 50 Capacitance 100 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 Capacitance Code 100 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 10000 pF 12000 pF 15000 pF 18000 pF 22000 pF 27000 pF 33000 pF 39000 pF 47000 pF 56000 pF 68000 pF 82000 pF 0.1 uF 0.12 uF 0.15 uF 0.18 uF 0.22 uF 0.27 uF 0.33 uF 0.39 uF 0.47 uF 0.56 uF 0.68 uF 0.82 uF 1 uF 1.2 uF 1.5 uF 1.8 uF 2.2 uF 2.7 uF 3.3 uF 3.9 uF 50 Capacitance Code 39 Voltage 50 Capacitance 25 RADIAL (ARR) 09 Radial (ARR) C1118_A-SERIES • 11/19/2021 4 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Soldering Process Recommended Soldering Technique: • Solder Wave • Hand Soldering (Manual) Recommended Soldering Profile: • Optimum Wave Solder Profile Solder Wave Peak Temperature 260ºC Entrance to Solder Wave Degrees – Cº Flux Zone 250 225 200 175 150 125 100 75 50 25 Exit from Solder Wave (Time in Wave – 2 to 4 Seconds) Preheat Zone Hot Air Debridging Exit from Solder Machine 80ºC to 120ºC Entrance to Solder Machine Free Air Cool Bottom Side Temperature Range Entrance to In-Line Cleaner Exit from In-Line Cleaner (time in cleaner may be less) Immersion in Cleaning Vapor 150ºC Maximum Top Side Nominal 0 1 2 3 Time (Minutes) 4 5 6 • Hand Soldering (Manual) Manual Solder Profile with Pre-heating Soldering Gradual Cooling Gradual Preheat 60 – 120 Seconds Recommend 2.5°C/second Maximum 3 seconds Delta T < = 120ºC KEMET recommends following the guidelines and techniques outlined in technical bulletins F2103 and F9207. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 5 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions Stress Reference Visual & Mechanical KEMET Internal Capacitance (Cap) Dissipation Factor (DF) Test Condition Limits No defects that may affect performance (10X) Dimensions according KEMET Spec Sheet MIL-STD-202 Method 305 C ≤ 100 pF: 1 MHz ± 100 kHz and 1.0 ±0.2 VRMS C > 100 pF: 1 kHz ±100 Hz and 1.0 ±0.2 VRMS Dimensions according KEMET Spec Sheet KEMET Internal C ≤ 100 pF: 1 MHz ± 100 kHz and 1.0 ±0.2 VRMS C > 100 pF: 1 kHz ±100 Hz and 1.0 ±0.2 VRMS X7R: 2.5% C0G: 0.15% Test potential: 500 V DC between capacitor element terminals Surge current: limited to 30mA Special condition: If failure at relative humidity of ≥ 50%, IR may be measured again at a relative humidity of less than 50% Within Specification To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. Insulation Resistance (IR) MIL-STD-202 Method 302 Temperature Coefficient of Capacitance (TCC) KEMET Internal C0G: 0 ppm/°C ±30 ppm/°C X7R (R or Z): ±15% Within Specification Temperature Coefficient of Capacitance at Applied Voltage (TCVC) KEMET Internal C0G: 0 ppm/°C ±30 ppm/°C X7R: +15%/−70% C0G: Within Specification X7R: Within KEMET Specification limits KEMET Internal 150% of rated voltage for voltage rating of 500 V ≤ V < 1,000 V 120% of rated voltage for voltage rating of ≥ 1,000 V (5 ±1 seconds and charge/discharge not exceeding 50 mA at 25°C) Cap: Initial Limit DF: Initial Limit IR: Initial Limit Dielectric Withstanding Voltage (DWV) At 25°C: 100,000 megohms or 1,000 Megohm-microfarad, whichever is less. At 125°C: 10,000 megohms or 100 Megohm-microfarad, whichever is less. Withstand test voltage without insulation breakdown or damage. Capacitance measurements (including tolerance) are indexed to a referee time of 48 or 1,000 hours. Please refer to a part number specific datasheet for referee time details. Please refer to a part number specification sheet for specific Aging rate MIL-STD-202 Method 211 Applied force: 5 pounds (2.3 kg) No evidence of mechanical damage MIL-STD-202 Method 208 Condition: 4 hours ±15 minutes at 155°C dry bake apply all methods Test 245 ± 5°C (SnPb & Pb-Free) Visual Inspection. 95% coverage on termination. No leaching Aging Rate (Maximum % Capacitance Loss/ Decade Hour) KEMET Internal Terminal Strength Solderability © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 6 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont. Stress Reference Test Condition Limits Temperature Cycling JESD22 Method JA–104 Test condition A (5 cycles) except that in step 3, sample units shall be tested at +125°C. Measurement at 24 hours ±4 hours after test conclusion. Cap: Initial Limit DF: Initial Limit IR: Initial Limit Visual examination: No mechanical damage. Marking shall remain legible Measurement at 24 hours ±4 hours after test conclusion. Within Post Environmental Limits Cap: X7R: Change not to exceed ±10% of initial measured value Cap: C0G: ±0.5 percent or 5 pF, whichever is greater, of initial measured value IR: 10% of Initial Limit of the initial +25°C requirement Moisture Resistance MIL-STD-202 Method 106 Number of cycles required 10, 24 hours per cycle. Steps 7a and 7b not required Thermal Shock MIL-STD-202 Method 107 Number of cycles required 5, (−55°C to 125°C) Dwell time 15 minutes. Cap: Initial Limit DF: Initial Limit IR: Initial Limit 2,000 hours at +125°C, +4°C, -0°C. With rated voltage, ±5 percent. Within Post Environmental Limits Visual examination: No mechanical damage. Marking shall remain legible. IR: (at +25°C): Shall not be less than 30 percent of the value specified IR: (at elevated ambient temperature): Shall not be less than 30 percent of the value specified High Temperature Life MIL-STD-202 Method 108 Storage Life 1,000 hours at 125°C, Unpowered Vibration MIL-STD-202 Method 204 5 g's for 20 minutes, 12 cycles each of 3 orientations. Test from 10 – 2,000 Hz Mechanical Shock MIL-STD-202 Method 213 1,500 g’s 0.5 ms Half-sine, Velocity Change 15.4 feet/second (Condition F) Resistance to Solvents MIL-STD-202 Method 215 Add Aqueous wash chemical OKEMCLEAN (A 6% concentrated Oakite cleaner) or equivalent. Do not use banned solvents Cap: Initial Limit DF: Initial Limit IR: Initial Limit Cap: Initial Limit DF: Initial Limit IR: Initial Limit Capacitors shall be visually examined for evidence of mechanical damage and marking. Packaging Quantities Style Waffle Pack Quantity Style Waffle Pack Quantity 25 ACR05 56 ACA16 ACR06 28 ACA25 25 ACR07 28 ACA39 25 25 ACR08 20 ACA50 ACR09 20 ACA69 25 ARR05 56 ARA16 25 ARR06 28 ARA25 25 ARR07 28 ARA39 25 ARR08 20 ARA50 25 ARR09 20 ARA69 25 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 7 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Storage & Handling The un-mounted storage life of a leaded ceramic capacitor is dependent upon storage and atmospheric conditions as well as packaging materials. While the ceramic chips enveloped under the epoxy coating themselves are quite robust in most environments, solderability of the wire lead on the final epoxy-coated product will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature and exposure to direct sunlight–reels may soften or warp, and tape peel force may increase. KEMET recommends storing the un-mounted capacitors in their original packaging, in a location away from direct sunlight, and where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. For optimum solderability, capacitor stock should be used promptly, preferably within 18 months of receipt. For applications requiring pre-tinning of components, storage life may be extended if solderability is verified. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. Construction Radial Ceramic Case Dielectric Material X7R - BaTiO3 C0G - BaNdTiO Solder Seal Inner Electrodes Lead Attach Solder Lead Wire Ordering Code Core Metal Barrier Layer Finish Layer G W Steel Copper Gold-Plated Solder-Coated Lead with Dumet Head © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 8 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) Construction cont. Axial Ceramic Case Dielectric Material X7R - BaTiO3 C0G - BaNdTiO Lead Attach Solder Lead with Dumet Head Inner Electrodes Solder Seal Lead Wire Ordering Code Core Metal Barrier Layer Finish Layer G W Steel Copper Gold-Plated Solder-Coated Marking Axial Side 1 Side 2 Side 3 Side 4 Radial Manufacturer’s ID KEC Manufacturer’s ID Capacitance Capacitance 106J Voltage Date Code Voltage 50V Date Code 123 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 9 Radial and Axial Leaded Multilayer Ceramic Capacitors A-Series with C3 Technology, Radial and Axial, Ceramic Cased, High Temperature 200°C, 25 – 100 VDC (Industrial Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1118_A-SERIES • 11/19/2021 10