B-03-RT

DC Line Filters Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Overview Applications The KEMET lead type beads intended for normal mode noise suppression have a wide variety of characteristics. These through-hole beads are designed with our proprietary ferrite material and are suitable for noise countermeasure in DC signal line circuits. • Audio-visual equipment • Office automation equipment • Digital appliances • Home appliances • Power supplies Benefits • Proprietary Nickel-Zinc (Ni-Zn) ferrite core • High loss • High reliability • Operating temperature range from −20°C to +70°C • RoHS Compliant Part Number System B- 01- R T Series Impedance (Ω) Lead Type Packaging Type Bead 01 = 2 Ω 02 = 4 Ω 03 = 5 Ω 06 = 40 Ω A A1 A2 R R-25 R-50 RS Blank = Bulk T = Tape & Reel TF = Flat taping One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 1 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Dimensions – Millimeters Part Number Dimensions - Millimeters B-01-R B-01-RS B-01-A B-01-A1 B-01-A2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 2 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Dimensions – Millimeters cont. Part Number Dimensions - Millimeters B-02-R B-03-R B-06-R-25 B-06-R-50 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 3 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Environmental Compliance All KEMET DC line filters are RoHS Compliant. Performance Characteristics Item Performance Characteristics Rated Current Impedance Range Shape Lead Type Operating Temperature 5A 2 – 40 Ω Single-bead and double-bead Axial and radial −20°C to +70°C (not including self-temperature rise) Table 1 – Ratings & Part Number Reference 1 Part Number Rated Current DC1 (A) Impedance (Ω) Shape Lead Type Weight (g) B-01-R B-01-RT B-01-RTF B-01-RS B-01-RTS B-01-RTSF B-01-A B-01-A1 B-01-A2 B-01-AT B-01-ATF B-01-AT1F B-02-R B-02-RT B-02-RTF B-03-R B-03-RT B-06-R-25 B-06-RTF-25 B-06-R-50 B-06-RTF-50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 2 at 1 MHz 4 at 1 MHz 4 at 1 MHz 4 at 1 MHz 5 at 1 MHz 5 at 1 MHz 40 at 10 MHz 40 at 10 MHz 40 at 10 MHz 40 at 10 MHz Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Single-bead Double-bead Double-bead Double-bead Double-bead Double-bead Double-bead Double-bead Double-bead Double-bead Radial Radial Radial Radial Radial Radial Axial Axial Axial Axial Axial Axial Radial Radial Radial Radial Radial Radial Radial Radial Radial 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.30 0.30 0.40 0.40 0.30 0.60 0.60 0.60 0.30 0.30 0.50 0.50 0.50 0.52 Rated current values are not guaranteed by impedance levels; these values are permissible levels when the lead wire temperature rise is 20°C. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 4 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Frequency Characteristics Packaging Part Type Packaging Type Pieces per Package Pieces per Box B-01-R B-01-RT B-01-RTF B-01-RS B-01-RTS B-01-RTSF B-01-A B-01-A1 B-01-A2 B-01-AT B-01-ATF B-01-AT1F B-02-R B-02-RT B-02-RTF B-03-R B-03-RT B-06-R-25 B-06-RTF-25 B-06-R-50 B-06-RTF-50 Bulk Tape & Reel Flat taping Bulk Tape & Reel Flat taping Bulk Bulk Bulk Tape & Reel Flat taping Flat taping Bulk Tape & Reel Flat taping Bulk Tape & Reel Bulk Flat taping Bulk Flat taping 100 2,000 2,000 100 2,000 2,000 100 250 250 5,000 1,500 2,000 100 2,000 1,500 100 2,000 100 1,500 100 1,500 18,000 12,000 20,000 18,000 12,000 20,000 18,000 30,000 30,000 20,000 15,000 32,000 12,000 12,000 15,000 18,000 12,000 12,000 15,000 12,000 15,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 5 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Taping Specifications B-01-R** B-01-RS** B-01-A** B-01-A1** B-02-R** & B-03-R* B-06-RTF25 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 6 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Taping Specifications cont. B-06-RTF50 Reel Specifications Reel Dimensions - Millimeters Part Number A N W1 +1.0, -0.0 W2 Maximum B-01-AT B-01-RT B-01-RTS B-02-RT B-03-RT 360.0 360.0 360.0 360.0 360.0 81.0 140.0 140.0 140.0 140.0 68.0 44.0 44.0 44.0 44.0 73.2 50.2 50.2 50.2 50.2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 7 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series Handling Precautions Precautions for product storage DC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Do not store near strong magnetic fields, as this might magnetize the product. For optimized solderability, DC line filter stock should be used promptly, preferably within six months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using, check and evaluate the value of the core temperature rise under actual operating conditions. Export Control For customers in Japan For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan DC Line Filters should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles) or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 8 DC Line Filters – Normal Mode for Signal Line, Through-Hole Type, Bead Lead Type Series KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0070_BEAD-L • 2/19/2020 9