C0402C333K8PACAUTO

C0402C333K8PACAUTO Obsolete SMD Comm X5R, Ceramic, 0.033 uF, 10%, 10 VDC, X5R, SMD, MLCC, Temperature Stable, Automotive Grade, 0402 General Information   Series SMD Comm X5R Style SMD Chip Description SMD, MLCC, Temperature Stable, Automotive Grade RoHS Yes Termination Tin Marking No Failure Rate N/A Qualifications AEC-Q200 AEC-Q200 Yes Shelf Life 78 Weeks MSL 1 Specifications   Capacitance 0.033 uF 0402 Capacitance Tolerance 10% L 1mm +/-0.05mm Voltage DC 10 VDC W 0.5mm +/-0.05mm 0.5mm +/-0.05mm Dielectric Withstanding Voltage 25 VDC T S 0.3mm MIN Temperature Range -55/+85°C B 0.3mm +/-0.1mm Temperature Coefficient X5R Dissipation Factor 5% Aging Rate 4% Loss/Decade Hour: Referee Time is 1000 Hours Insulation Resistance 10 GOhms Dimensions Chip Size   Packaging Specifications   Packaging T&R, 180mm, Paper Tape Packaging Quantity 10000 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Generated 1/03/2023 - 5e20aa7f-03b8-4aae-b848-12090f2a10c8 © 2006 - 2023 KEMET C0402C333K8PACAUTO Obsolete SMD Comm X5R, Ceramic, 0.033 uF, 10%, 10 VDC, X5R, SMD, MLCC, Temperature Stable, Automotive Grade, 0402 Simulations For the complete simulation environment please visit K-SIM. Generated 1/03/2023 - 5e20aa7f-03b8-4aae-b848-12090f2a10c8 © 2006 - 2023 KEMET C0402C333K8PACAUTO Obsolete SMD Comm X5R, Ceramic, 0.033 uF, 10%, 10 VDC, X5R, SMD, MLCC, Temperature Stable, Automotive Grade, 0402 Generated 1/03/2023 - 5e20aa7f-03b8-4aae-b848-12090f2a10c8 © 2006 - 2023 KEMET C0402C333K8PACAUTO Obsolete SMD Comm X5R, Ceramic, 0.033 uF, 10%, 10 VDC, X5R, SMD, MLCC, Temperature Stable, Automotive Grade, 0402 These are simulations. This is not a specification! The responses shown represent the typical response for each part type. Specific responses may vary, depending on manufacturing variation affects of all parameters involved, including the specified tolerances applied to capacitance and unspecified variations of ESR, ESL, and leakage resistance. The responses shown do not represent a specified or implied maximum capability of the device for all applications. • The ESR used for ripple “Ripple Current/Voltage vs. Frequency” plots is the ESR at ambient temperature. • The ESR in the “Temperature Rise vs. Ripple Current” plots is adjusted to each incremental temperature rise before the power and ripple current is calculated. • The effects shown herein are based on measured data from a multiple part sample of the parts in question. • Ripple capability of this device will be factored by thermal resistance (Rth) created by circuit traces (addi affects of all parameters involved, including the specified tolerances applied to capacitance and unspecified variations of ESR, ESL, and leakage resistance. The peak voltages generated in the “Temperature Rise vs. Combined Ripple Currents” plot are calculated for each frequency and are not combined with voltages generated at any other harmonics. Please consult with the catalog or field applications engineer for maximum capability of the device in specific applications. • • All product information and data (collectively, the “Information”) are subject to change without notice. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. The responses shown represent the typical response for each part type. Specific responses may vary, depending on manufacturing variation effects of all parameters involved, including the specified tolerances applied to capacitance and unspecified variations of ESR, ESL, and leakage resistance. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. If you have any questions please contact K-SIM. Generated 1/03/2023 - 5e20aa7f-03b8-4aae-b848-12090f2a10c8 © 2006 - 2023 KEMET