Radial Through Hole Multilayer Ceramic Capacitors
Radial, Molded, X7R Dielectric, 50 – 200 VDC
(Commercial Grade)
Overview
KEMET’s epoxy molded radial through-hole ceramic
capacitors in X7R dielectric feature an 125°C maximum
operating temperature and are considered “temperature
stable.” The Electronics Industries Alliance (EIA)
characterizes X7R dielectric as a Class II
material. Components of this classification are fixed,
ceramic dielectric capacitors suited for bypass and
decoupling applications or for frequency discriminating
circuits where Q and stability of capacitance characteristics
are not critical. X7R exhibits a predictable change in
capacitance with respect to time and voltage and boasts a
minimal change in capacitance with reference to ambient
temperature. Capacitance change is limited to ±15% from
−55°C to +125°C. These devices meet the flame test
requirements outlined in UL Standard 94 V–0.
Benefits
• Radial through-hole form factor
• Molded case
• −55°C to +125°C operating temperature range
• RoHS Compliant
• X7R temperature stable dielectric
• DC voltage ratings of 50 V, 100 V and 200 V
• Capacitance offerings ranging from 10 pF to 3.3 μF
• Available capacitance tolerances of ±10% and ±20%
• Non-polar device, minimizing installation concerns
• SnPb-plated lead finish (60/40)
• 100% pure matte tin-plated lead finish option available
upon request (RoHS)
• Encapsulation meets flammability standard UL 94 V–0
Ordering Information
C
Ceramic
062
C
Style Specification/
/Size
Series
052
062
512
522
105
Capacitance
Code (pF)
K
1
R
Capacitance Rated Voltage
Dielectric
Tolerance1
(VDC)
C = Standard Two significant K = ±10%
digits and
M = ±20%
number of
zeros
5 = 50
1 = 100
2 = 200
R = X7R
5
T
Design
Lead Finish2
5 = Multilayer T = 100%
Matte Sn
C = SnPb
(60/40)
A
7301
Failure Packaging/Grade
Rate
(C-Spec)3
A = N/A Blank = Bulk
7301 = 12" Reel
7303 = 12" Reel
7293 = Ammo
Pack
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
Lead materials and finishes:
Standard: 60% tin (Sn)/40% lead (Pb) finish with 100% copper core ( “C” designation).
Optional (C052 & C062 only): 100% matte tin (Sn) with nickel (Ni) underplate and steel core ( “T” designation).
Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Reeling options:
C-Spec 7301: Recommended for straight lead configuration part types.
C-Spec 7301: Recommended for formed (bent) lead configuration part types.
1
2
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
1
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Dimensions – Inches (Millimeters)
L
L
W
H
H
1.25
Min.
d
0.045
Max.
d
1.25
Min.
Series
Style/
Size
S
Lead Spacing
C05X
052/ 056
C06X
062/ 066
S
C5XX
W
512
522
S
0.20±0.015
(5.08±0.38)
0.40±0.02
(10.16±0.51)
L
Length
H
Height
T
Thickness
LD
Lead Diameter
LL
Lead Length
Minimum
0.19±0.01
(4.83±0.25)
0.29±0.01
(7.37±0.25)
0.48±0.02
(12.19±0.51)
0.48±0.02
(12.19±0 .51)
0.19±0.01
(4.83±0.25)
0.29±0.01
(7.37±0.25)
0.48±0.02
(12.19±0.51)
0.48±0.02
(12.19±0.51)
0.09±0.01
(2.29±0.25)
0.09±0.01
(2.29±0.25)
0.14±0.01
(3.56±0.25)
0.24±0.01
(6.10±0.25)
0.025+0.004/−0.002
(0.635+0.102/−0.051)
1.25 (31.75)
Applications
Typical applications include decoupling, bypass, filtering and transient voltage suppression.
Application Notes
These devices are not recommended for use in overmold applications and/or processes
Qualification/Certification
Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are
referenced in Table 2, Performance & Reliability.
Environmental Compliance
Devices with standard lead finish option of 60% tin (Sn)/40% lead (Pb) do not meet RoHS criteria.
Devices with 100% matte tin (Sn) lead finish option are RoHS Compliant (C052 & C062 only).
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
2
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
−55°C to +125°C
Capacitance Change with Reference to
+25°C and 0 VDC Applied (TCC)
±15%
Aging Rate (Maximum % Cap Loss/Decade Hour)
3.0%
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limit at 25ºC
Insulation Resistance (IR) Limit at 25°C
250% of rated voltage
(5±1 second and charge/discharge not exceeding 50 mA)
3.5%(25 V) and 2.5%(50 V to 250 V)
1,000 megohm microfarads or 100 GΩ
(Rated voltage applied for 120±5 seconds at 25°C)
Regarding aging rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 kHz ±50 Hz and 1.0 ±0.2 Vrms if capacitance ≤ 10 µF
120 Hz ±10 Hz and 0.5 ±0.1 Vrms if capacitance > 10 µF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
Rated DC Voltage
Capacitance Value
> 25
X7R
16/25
< 16
DF (%)
Capacitance Shift
3.0
All
5.0
±20%
7.5
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
3
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
0.01µF
0.012µF
0.015µF
0.018µF
0.022µF
0.027µF
0.033µF
0.039µF
0.047µF
0.056µF
0.068µF
0.082µF
0.1µF
Capacitance Code (Available Capacitance)
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
K = ±10%
M = ±20%
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
4
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Table 1B – C062 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C062 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
1200pF
1500pF
1800pF
2200pF
2700pF
3300pF
3900pF
4700pF
5600pF
6800pF
8200pF
0.01µF
0.012µF
0.015µF
0.018µF
0.022µF
0.027µF
0.033µF
0.039µF
0.047µF
0.056µF
0.068µF
0.082µF
0.1µF
0.12µF
0.15µF
0.18µF
0.22µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
0.68µF
0.82µF
1.0µF
Capacitance Code (Available Capacitance)
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
122
152
182
222
272
332
392
472
562
682
822
103
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
K = ±10%
M = ±20%
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
5
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Table 1C – C512 Style/Size (0.40" Lead Spacing), Capacitance Range Waterfall
C512 Style/Size (0.40" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
1.0µF
1.5µF
2.0µF
2.2µF
K = ±10%
M = ±20%
Capacitance Code (Available Capacitance)
105
155
205
225
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Table 1D – C522 Style/Size (0.40" Lead Spacing), Capacitance Range Waterfall
C522 Style/Size (0.40" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
1.0µF
2.7µF
3.3µF
Capacitance Code (Available Capacitance)
105
275
335
105
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
K = ±10%
M = ±20%
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
6
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Soldering Process
Recommended Soldering Technique:
• Solder Wave
• Hand Soldering (Manual)
Recommended Soldering Profile:
• Optimum Wave Solder Profile
Solder Wave Peak
Temperature 260ºC
Entrance to Solder Wave
Degrees – Cº
Flux Zone
250
225
200
175
150
125
100
75
50
25
Exit from Solder Wave
(Time in Wave – 2 to 4 Seconds)
Preheat Zone
Hot Air Debridging
Exit from
Solder
Machine
80ºC
to 120ºC
Entrance
to Solder
Machine
Free
Air
Cool
Bottom Side
Temperature
Range
Entrance to
In-Line Cleaner
Exit from
In-Line Cleaner
(time in cleaner
may be less)
Immersion in
Cleaning
Vapor
150ºC
Maximum
Top Side
Nominal
0
1
2
3
Time (Minutes)
4
5
6
• Hand Soldering (Manual)
Manual Solder Profile with Pre-heating
Soldering
Gradual Cooling
Gradual Preheat
60 – 120 Seconds
Recommend 2.5°C/second
Maximum 3 seconds
Delta T < = 120ºC
KEMET recommends following the guidelines and techniques outlined in technical bulletins F2103 and F9207.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
7
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Test or Inspection Method
Magnification 50 X. Conditions:
Solderability
J–STD–002
a) Method B, 4 hours at 155°C, dry heat at 235°C
b) Method B at 215°C category 3
c) Method D, category 3 at 260°C
Temperature Cycling
JESD22 Method JA–104
Biased Humidity
MIL–STD–202
Method 103
Moisture Resistance
Thermal Shock
High Temperature Life
Storage Life
MIL–STD–202
Method 106
MIL–STD–202
Method 107
MIL–STD–202
Method 108/EIA–198
MIL–STD–202
Method 108
Vibration
Resistance to Soldering
Heat
Terminal Strength
Mechanical Shock
Resistance to Solvents
MIL–STD–202
Method 204
MIL–STD–202
Method 210
MIL–STD–202
Method 211
MIL–STD–202
Method 213
MIL–STD–202
Method 215
1,000 cycles (−55°C to +125°C), Measurement at 24 hours. +/−2 hours after test conclusion.
Load Humidity: 1,000 hours 85°C/85% RH and Rated Voltage. Add 100 K ohm resistor.
Measurement at 24 hours. +/−2 hours after test conclusion.
Low Volt Humidity: 1,000 hours 85°C/85% RH and 1.5 V. Add 100 K ohm resistor.
Measurement at 24 hours. +/−2 hours after test conclusion.
t = 24 hours/cycle. Steps 7a and 7b not required. Unpowered.
Measurement at 24 hours. +/−2 hours after test conclusion.
−55°C/+125°C. Note: Number of cycles required – 300. Maximum transfer time – 20
seconds. Dwell time – 15 minutes. Air – Air.
1,000 hours at 125°C (85°C for X5R, Z5U and Y5V) with 2 X rated voltage applied.
150°C, 0 VDC, for 1,000 hours.
5 g for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8"X5" PCB .031" thick 7
secure points on one long side and 2 secure points at corners of opposite sides. Parts
mounted within 2" from any secure point. Test from 10 – 2,000 Hz.
Condition B. No pre-heat of samples. Note: single wave solder – procedure 2.
Conditions A (2.3 kg or 5 lbs)
Figure 1 of Method 213, Condition F.
Add aqueous wash chemical, OKEM Clean or equivalent.
Storage & Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature–reels may soften or warp,
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC, and maximum
storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on
the parts, and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability, chip stock
should be used promptly, preferably within 1.5 years of receipt.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
8
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
Packaging Details
Lead Spacing
Component Pitch (P1)
0.100 (2.54)
5.08
0.200 (5.08)
3.81
0.400 (10.16)
7.62
0.170 (4.32)
0.220 (5.59)
0.275 (6.98)
0.300 (7.62)
0.375 (9.52)
0.475 (12.06)
0.575 (14.60)
0.675 (17.14)
Packaging Quantities
Style/
Size
Standard Bulk
Quantity
Ammo Pack
Quantity
Maximum
Reel Quantity
Maximum
(12" Reel)
052
100/Bag
2000
2000
062
100/Bag
1500
1500
See Note1
N/A
N/A
512
522
1
Quantity varies. For further details, please contact KEMET.
Marking
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
9
Radial Through Hole Multilayer Ceramic Capacitors – Radial, Molded, X7R Dielectric, 50 – 200 VDC (Commercial Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1059_X7R_RADIAL_MOLDED • 10/17/2019
10
工商网监
湘ICP备2023018690号
