Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric,
50 – 200 VDC (Industrial Grade)
Overview
KEMET’s High Temperature 200ºC epoxy molded radial
through-hole ceramic capacitors in C0G dielectric features
a robust and proprietary base metal dielectric system
that offers industry-leading performance in extreme high
pressure and high temperature environments up to 200°C.
These capacitors are designed specifically to withstand
the severe shock and vibration conditions associated
with deep-well and horizontal drilling activities and are
well suited for use in aerospace engine compartments,
geophysical probes, hybrid and electric automotive motor
drives and defense applications.
As high temperature electronic module complexity
increases, the size reduction of components becomes
more and more critical. These devices are significantly
smaller by volume than most competitor radial molded
capacitors, allowing for downsizing and replacement
opportunities of larger high temperature precious metal
electrode (PME) and base metal electrode (BME) dielectric
system devices. They feature gold-plated lead wires for
temperature resistance and an epoxy molded case for
environmental protection and mechanical durability.
With virtually no capacitance change at 200°C and rated
voltage applied, these radial molded capacitors in C0G
dielectric are temperature compensating and are suited
for resonant circuit applications or those where Q and
stability of capacitance characteristics are required. They
exhibit no change in capacitance with respect to time and
voltage and boast a negligible change in capacitance with
reference to ambient temperature. Capacitance change is
limited to ±30ppm/ºC from −55°C to +200°C. In addition,
these capacitors exhibit high insulation resistance with low
dissipation factor at elevated temperatures up to 200°C, as
well as low ESR at high frequencies.
Click image above for interactive 3D content
Ordering Information
C
Ceramic
052
H
Style/ Specification/
Size
Series
052
062
H=
High Temp
200ºC
Open PDF in Adobe Reader for full functionality
272
F
Capacitance
Code (pF)
Capacitance
Tolerance1
Two significant digits
and number of zeros
Use 9 for 1.0 – 9.9 pF
ex. 2.2 pF = 229
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
2
G
5
Rated
Voltage Dielectric Design
(VDC)
5 = 50
G=
5=
1 = 100
C0G
Multilayer
2 = 200
G
A
7301
Lead
Finish2
Failure
Rate
Packaging
C-Spec3
G=
Gold (Au)
A=
N/A
Blank = Bulk Bag
T250 = 250 pcs/
12" Reel
T500 = 500 pcs/
12" Reel
T1K0 = 1,000 pcs/
12" Reel
7301 = Full Reel Qty/
12" Reel
7303 = Full Reel Qty/
12" Reel
7061 = Bulk Tray
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character
positions are left blank.
3
C-Spec 7301 can only be used when ordering 052 style/size.
3
C-Spec 7303 can only be used when ordering 062 style/size.
1
2
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
1
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Dimensions – Inches (Millimeters)
C052H
C062H
L
0.045
(1.143)
Maximum
T
L
T
H
H
LL
LL
LD
LD
S
Series
S
S
Lead Spacing
L
Length
H
Height
T
Thickness
LD
Lead Diameter
LL
Lead Length
Minimum
0.20±0.015
(5.08±0.38)
0.19±0.01
(4.83±0.25)
0.29±0.01
(7.37±0.25)
0.19±0.01
(4.83±0.25)
0.29±0.01
(7.37±0.25)
0.09±0.01
(2.29±0.25)
0.09±0.01
(2.29±0.25)
0.025+0.004/−0.002
(0.635+0.102/−0.051)
1.25 (31.75)
C052H
C062H
Benefits
• Operating temperature range of −55°C to +200°C
• High shock and vibration capability
• Base Metal Electrode (BME) dielectric system
• RoHS and REACH compliant
• Radial through-hole form factor
• Gold (Au) plated wire lead finish
• Military designation styles CK/CKR05 and CK/CKR06
• Molded case
• High breakdown voltage strength
• DC voltage ratings of 50 V, 100 V and 200 V
• Capacitance offerings ranging from 1.0 pF up to 0.22 μF
• Available capacitance tolerances of ±0.1 pF, ±0.25 pF, ±0.5
pF, ±1%, ±2%, ±5%, and ±10%
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
• No capacitance change with respect to applied rated DC
voltage
• Negligible capacitance change with respect to temperature
from −55°C to +200°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• Encapsulation meets flammability standard UL 94V–0
• Halogen-free
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling,
bypass, filtering, transient voltage suppression, blocking and energy storage, circuits with a direct battery or power source
connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to
extreme environments such as high shock and vibration, high temperature, high levels of board flexure and/or temperature
cycling. Programs supported include down-hole exploration, aerospace engine compartments, geophysical probes, hybrid
and electric automotive motor drives and defense. Markets include military, industrial, aerospace, and automotive.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
2
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Qualification
These devices are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 2,
Performance & Reliability.
Environmental Compliance
RoHS compliant and halogen-free. These devices utilize exemption 7(a) of the RoHS directive.
1
Series
RoHS
Compliant
RoHS
Exemption Code1
Halogen Free
C052H
Yes
7(a)
Yes
C062H
Yes
7(a)
Yes
7(a): Lead in high melting temperature type solders
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
Capacitance Change with Reference to
+25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Cap Loss/Decade Hour)
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limit at 25ºC
Insulation Resistance (IR) Limit at 25°C
−55°C to +200°C
±30 ppm/ºC
0%
250% of rated voltage
(5±1 seconds and charge/discharge not exceeding 50 mA at 25°C)
0.1%
1,000 MΩ microfarads or 100 GΩ
(Rated voltage applied for 120±5 seconds)
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
C0G
Rated DC Voltage Capacitance Value
All
All
DF (%)
0.5
Capacitance Shift
IR
0.3% or ±0.25 pF 10% of Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
3
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1,000 pF
1,200 pF
1,500 pF
1,800 pF
2,200 pF
Capacitance Code (Available Capacitance)
C052H109(1)5G5GA(3)
C052H129(1)5G5GA(3)
C052H159(1)5G5GA(3)
C052H189(1)5G5GA(3)
C052H229(1)5G5GA(3)
C052H279(1)5G5GA(3)
C052H339(1)5G5GA(3)
C052H399(1)5G5GA(3)
C052H479(1)5G5GA(3)
C052H569(1)5G5GA(3)
C052H689(1)5G5GA(3)
C052H829(1)5G5GA(3)
C052H100(2)5G5GA(3)
C052H120(2)5G5GA(3)
C052H150(2)5G5GA(3)
C052H180(2)5G5GA(3)
C052H220(2)5G5GA(3)
C052H270(2)5G5GA(3)
C052H330(2)5G5GA(3)
C052H390(2)5G5GA(3)
C052H470(2)5G5GA(3)
C052H560(2)5G5GA(3)
C052H680(2)5G5GA(3)
C052H820(2)5G5GA(3)
C052H101(2)5G5GA(3)
C052H121(2)5G5GA(3)
C052H151(2)5G5GA(3)
C052H181(2)5G5GA(3)
C052H221(2)5G5GA(3)
C052H271(2)5G5GA(3)
C052H331(2)5G5GA(3)
C052H391(2)5G5GA(3)
C052H471(2)5G5GA(3)
C052H561(2)5G5GA(3)
C052H681(2)5G5GA(3)
C052H821(2)5G5GA(3)
C052H102(2)5G5GA(3)
C052H122(2)5G5GA(3)
C052H152(2)5G5GA(3)
C052H182(2)5G5GA(3)
C052H222(2)5G5GA(3)
C052H109(1)1G5GA(3)
C052H129(1)1G5GA(3)
C052H159(1)1G5GA(3)
C052H189(1)1G5GA(3)
C052H229(1)1G5GA(3)
C052H279(1)1G5GA(3)
C052H339(1)1G5GA(3)
C052H399(1)1G5GA(3)
C052H479(1)1G5GA(3)
C052H569(1)1G5GA(3)
C052H689(1)1G5GA(3)
C052H829(1)1G5GA(3)
C052H100(2)1G5GA(3)
C052H120(2)1G5GA(3)
C052H150(2)1G5GA(3)
C052H180(2)1G5GA(3)
C052H220(2)1G5GA(3)
C052H270(2)1G5GA(3)
C052H330(2)1G5GA(3)
C052H390(2)1G5GA(3)
C052H470(2)1G5GA(3)
C052H560(2)1G5GA(3)
C052H680(2)1G5GA(3)
C052H820(2)1G5GA(3)
C052H101(2)1G5GA(3)
C052H121(2)1G5GA(3)
C052H151(2)1G5GA(3)
C052H181(2)1G5GA(3)
C052H221(2)1G5GA(3)
C052H271(2)1G5GA(3)
C052H331(2)1G5GA(3)
C052H391(2)1G5GA(3)
C052H471(2)1G5GA(3)
C052H561(2)1G5GA(3)
C052H681(2)1G5GA(3)
C052H821(2)1G5GA(3)
C052H102(2)1G5GA(3)
C052H122(2)1G5GA(3)
C052H152(2)1G5GA(3)
C052H182(2)1G5GA(3)
C052H222(2)1G5GA(3)
C052H109(1)2G5GA(3)
C052H129(1)2G5GA(3)
C052H159(1)2G5GA(3)
C052H189(1)2G5GA(3)
C052H229(1)2G5GA(3)
C052H279(1)2G5GA(3)
C052H339(1)2G5GA(3)
C052H399(1)2G5GA(3)
C052H479(1)2G5GA(3)
C052H569(1)2G5GA(3)
C052H689(1)2G5GA(3)
C052H829(1)2G5GA(3)
C052H100(2)2G5GA(3)
C052H120(2)2G5GA(3)
C052H150(2)2G5GA(3)
C052H180(2)2G5GA(3)
C052H220(2)2G5GA(3)
C052H270(2)2G5GA(3)
C052H330(2)2G5GA(3)
C052H390(2)2G5GA(3)
C052H470(2)2G5GA(3)
C052H560(2)2G5GA(3)
C052H680(2)2G5GA(3)
C052H820(2)2G5GA(3)
C052H101(2)2G5GA(3)
C052H121(2)2G5GA(3)
C052H151(2)2G5GA(3)
C052H181(2)2G5GA(3)
C052H221(2)2G5GA(3)
C052H271(2)2G5GA(3)
C052H331(2)2G5GA(3)
C052H391(2)2G5GA(3)
C052H471(2)2G5GA(3)
C052H561(2)2G5GA(3)
C052H681(2)2G5GA(3)
C052H821(2)2G5GA(3)
C052H102(2)2G5GA(3)
C052H122(2)2G5GA(3)
C052H152(2)2G5GA(3)
C052H182(2)2G5GA(3)
C052H222(2)2G5GA(3)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
(1) (2) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: B, C, D
(2) Available capacitance tolerances: F, G, J, K
(3) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 and 7670981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
4
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall cont'd
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
Capacitance Code (Available Capacitance)
C052H272(2)5G5GA(3)
C052H332(2)5G5GA(3)
C052H392(2)5G5GA(3)
C052H472(2)5G5GA(3)
C052H562(2)5G5GA(3)
C052H682(2)5G5GA(3)
C052H822(2)5G5GA(3)
C052H103(2)5G5GA(3)
C052H123(2)5G5GA(3)
C052H153(2)5G5GA(3)
C052H183(2)5G5GA(3)
C052H223(2)5G5GA(3)
C052H273(2)5G5GA(3)
C052H333(2)5G5GA(3)
C052H393(2)5G5GA(3)
C052H473(2)5G5GA(3)
C052H563(2)5G5GA(3)
C052H683(2)5G5GA(3)
C052H823(2)5G5GA(3)
C052H104(2)5G5GA(3)
C052H272(2)1G5GA(3)
C052H332(2)1G5GA(3)
C052H392(2)1G5GA(3)
C052H472(2)1G5GA(3)
C052H562(2)1G5GA(3)
C052H682(2)1G5GA(3)
C052H822(2)1G5GA(3)
C052H103(2)1G5GA(3)
C052H123(2)1G5GA(3)
C052H153(2)1G5GA(3)
C052H183(2)1G5GA(3)
C052H223(2)1G5GA(3)
C052H273(2)1G5GA(3)
C052H333(2)1G5GA(3)
C052H393(2)1G5GA(3)
C052H473(2)1G5GA(3)
C052H272(2)2G5GA(3)
C052H332(2)2G5GA(3)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
F = ±1%
G = ±2%
J = ±5%
K = ±10%
(1) (2) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: B, C, D
(2) Available capacitance tolerances: F, G, J, K
(3) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 and 7670981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
5
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1B – C062 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C062 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
4,700 pF
5,600 pF
6,800 pF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
Capacitance
Tolerance
Capacitance Code (Available Capacitance)
F = ±1%
G = ±2%
J = ±5%
K = ±10%
C062H563(1)1G5GA(2)
C062H683(1)1G5GA(2)
C062H823(1)1G5GA(2)
C062H104(1)1G5GA(2)
C062H124(1)1G5GA(2)
C062H124(1)5G5GA(2)
C062H154(1)5G5GA(2)
C062H184(1)5G5GA(2)
C062H224(1)5G5GA(2)
C062H472(1)2G5GA(2)
C062H562(1)2G5GA(2)
C062H682(1)2G5GA(2)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
(1) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: F, G, J, K
(2) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 and 7670981, other patents pending, and any foreign counterparts.
Packaging Quantities
Packaging Options
Bulk Bag
(default)1
Bulk Tray
Tape and Reel
Packaging Quantities3
Ordering Code
C-Spec2
Style/
Series
n/a
7061
T250
T500
T1K0
7301
7303
C052H
100 pcs/bag
50 pcs/tray
250
500
1,000
2,000
n/a
C062H
100 pcs/bag
40 pcs/tray
250
500
1,000
n/a
1,500
Default packaging for this product series is "Bulk Bag". KEMET will assume " Bulk Bag" packaging is required unless a valid C-spec is included in the
15th thru 18th character positions of the ordering code. For more information see "Ordering Information" section of this document.
1, 2
The " Ordering Code C-Spec" is a four-digit code that follows the KEMET part number and identifies any special packaging or processing
requirements. Failure to include a C-Spec when ordering will result in the default packaging option. Default packaging for this product series is "Bulk
Bag".
3
Packaging quantities reported above are considered "minimum order quantities" and are mandatory.
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
6
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Soldering Process
Recommended Soldering Technique:
• Solder Wave
• Hand Soldering (Manual)
Recommended Soldering Profile:
• Optimum Wave Solder Profile
Solder Wave Peak
Temperature 260ºC
Entrance to Solder Wave
Degrees – Cº
Flux Zone
250
225
200
175
150
125
100
75
50
25
Exit from Solder Wave
(Time in Wave – 2 to 4 Seconds)
Preheat Zone
Hot Air Debridging
Exit from
Solder
Machine
80ºC
to 120ºC
Entrance
to Solder
Machine
Free
Air
Cool
Bottom Side
Temperature
Range
Entrance to
In-Line Cleaner
Exit from
In-Line Cleaner
(time in cleaner
may be less)
Immersion in
Cleaning
Vapor
150ºC
Maximum
Top Side
Nominal
0
1
2
3
Time (Minutes)
4
5
6
• Hand Soldering (Manual)
Manual Solder Profile with Pre-heating
Soldering
Gradual Cooling
Gradual Preheat
60 – 120 Seconds
Recommend 2.5ºC/second
Maximum 3 seconds
Delta T < = 120ºC
KEMET recommends following the guidelines and techniques outlined in technical bulletins F2103 and F9207.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
7
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Solderability
J–STD–002
Temperature Cycling
JESD22 Method JA–104
Biased Humidity
MIL–STD–202 Method
103
Immersion
Storage Life
High Temperature Life
High Temperature
Lead Pull
Vibration
Resistance to Soldering
Heat
Terminal Strength
Mechanical Shock
Resistance to Solvents
MIL–STD–202 Method
104
MIL–STD–202 Method
108
MIL–STD–202 Method
108
KEMET Defined Test
MIL–STD–202 Method
204
MIL–STD–202 Method
210
MIL–STD–202 Method
211
MIL–STD–202 Method
213
MIL–STD–202 Method
215
Test or Inspection Method
Method A at 235°C, category 3
50 cycles (−55°C to 220°C), measurement at 24 ±4 hours after test conclusion. 30 minutes
maximum dwell time at each temperature extreme. 8 minutes maximum transition time.
Load humidity: 1,000 hours 85°C/85% RH and rated voltage. Add 100 K ohm resistor.
Measurement at 24 hours ±4 hours after test conclusion.
Low volt humidity: 1,000 hours 85°C/85% RH and 1.5 V. Add 100 K ohm resistor.
Measurement at 24 hours ±4 hours after test conclusion.
Test condition B
Unpowered 1,000 hours at 200°C. Measurement at 24 hours ±4 hours after test conclusion.
IR Measurement at 150°C
1,000 hours at 200°C with rated voltage applied.
Peel to Failure (25ºC and 200ºC): 4 lbs (1.84 kg) minimum
5g for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8" X 5" PCB. 031" thick 7
secure points on one long side and 2 secure points at corners of opposite sides. Parts
mounted within 2" from any secure point. Test from 10 – 2000 Hz.
Test Condition B, Solder dip. Note: no preheat of samples.
Test Condition A. 454g 5 – 10 s; Bend test © 227g, 3 bends
Test Condition D. Figure 1 of Method 213.
Add aqueous wash chemical – OKEM Clean or equivalent.
Storage & Handling
The un-mounted storage life of a through-hole (leaded) ceramic capacitor is dependent upon storage and atmospheric
conditions as well as packaging materials. While the ceramic chips enveloped under the epoxy coating themselves are quite
robust in most environments, solderability of the wire lead on the final epoxy-coated product will be degraded by exposure
to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be
degraded by high temperature and exposure to direct sunlight–reels may soften or warp, and tape peel force may increase.
KEMET recommends storing the un-mounted capacitors in their original packaging, in a location away from direct sunlight,
and where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. For optimum
solderability, capacitor stock should be used promptly, preferably within 18 months of receipt. For applications requiring
pre-tinning of components, storage life may be extended if solderability is verified. Before cleaning, bonding or molding these
devices, it is important to verify that your process does not affect product quality and performance. KEMET recommends
testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any
of these processes.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
8
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Application Notes
Working Voltage:
Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated
for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a
capacitor with a voltage rating greater than or equal to these irregular voltages.
Operating Temperature and Self-Generating Heat:
The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current,
pulse current or similar current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated
heating should not exceed 20°C (while operated at an atmosphere temperature of 25°C).
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR
PARTIAL DISPERSION WHEN THE PRODUCT IS USED.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016
9
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Construction
Epoxy
Encapsulation
Finish Layer
(Sn10/Pb88/Ag2)
Detailed Cross Section
Barrier Layer
(Ni)
Base Metal
(Cu)
Lead Attach Solder
(Sn10/Pb88/Ag2)
Lead Attach Solder
(Sn10/Pb88/Ag2)
Dielectric
Material (CaZrO3)
Inner Electrodes
(Ni)
Barrier Layer
(Ni)
Base Metal
(Cu)
Finish Layer
(Sn10/Pb88/Ag2)
Lead Wire
Inner Electrodes
(Ni)
Epoxy
Encapsulation
Steel
Cu
Ni
Au
Core Metal
Barrier Layer 1
Barrier Layer 2
Finish Layer
Marking
FRONT
BACK
Rated Voltage
(VDC)
Style/Size
Dielectric
Specification/Series
KEMET ID
Rated Capacitance
Capacitance
Tolerance Code
Date Code
Date Code
14
20
Manufacturing Year:
14 = 2014
Manufacturing Week:
20 = Week 20
(of mfg. calendar year)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 10
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Lead Tape & Reel Packaging Information
KEMET offers standard reeling of Molded Radial Leaded
Capacitors in accordance with EIA standard 468. Parts
are taped to a tag board carrier strip, and wound on a reel
as shown in Figure 1. Kraft paper interleaving is inserted
between the layers of capacitors on the reel.
t
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 11
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 3 – Ceramic Radial Tape and Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D0
P2
P0
P
∆H
±0.2 (0.008) ±0.3 (0.012) ±0.3 (0.012) ±0.7 (0.028) Maximum
L1
Maximum
t
Maximum
W
T
W0
+ 1.0/−0.5
Maximum (+0.039/−0.020) Minimum
4.00 (0.157) 12.7 (0.500) 12.7 (0.500) 6.35 (0.250) 1.0 (0.039) 1.0 (0.039) 0.9 (0.035) 2.0 (0.079)
18.0 (0.709)
W2
Maximum
5.0 (0.197) 3.0 (0.118)
Symbol Reference Table
Variable Dimensions — Millimeters (Inches)
F
+0.6 (0.024)
−0.2 (0.008)
Note 1
P1
±0.7 (0.028)
Note 1
2.54 (0.100)
5.08 (0.200)
4.32 (0.170)
3.89 (0.153)
P1
5.08 (0.200)
3.81 (0.150)
5.59 (0.220)
D0
Sprocket Hole Diameter
P0
Sprocket Hole Pitch
P
Component Pitch
F
P2
Lead Spacing
Sprocket Hole Center to Adjacent Component
Lead
Sprocket Hole Center to Component Center
3.25 (0.128)
H
Height to Seating Plane (Straight Leads Only)
6.98 (0.275)
2.54 (0.100)
H0
Height to Seating Plane (Formed Leads Only)
7.62 (0.300)
2.24 (0.088)
H1
Component Height Above Tape Center
9.52 (0.375)
7.62 (0.300)
∆H
Component Alignment
10.16 (0.400)
7.34 (0.290)
L1
Lead Protrusion
12.06 (0.475)
6.35 (0.250)
t
W
Composite Tape Thickness
Carrier Tape Width
14.60 (0.575)
5.08 (0.200)
W0
Hold-Down Tape Width
17.14 (0.675)
3.81 (0.15)
W2
Hold-Down Tape Location
H
Minimum
Note 2
18.0 (0.709)
H0
±0.5 (0.630)
Note 3
16.0 (0.024)
1. Measured at the egress from the carrier tape, on the component side.
2. Straight Lead configuration part types only.
3. Formed (bent) lead configuration part types only.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 12
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 13
工商网监
湘ICP备2023018690号
