Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Overview
KEMET’s Automotive Grade Series surface mount capacitors in
X7R dielectric are suited for a variety of applications requiring
reliable operation. Whether under-hood or in-cabin, these devices
emphasize the vital and robust nature of capacitors required for
mission and safety critical automotive circuits. Stricter testing
protocol and inspection criteria have been established for
automotive grade products in recognition of potentially harsh
environmental conditions. KEMET Automotive Grade series
capacitors meet the demanding Automotive Electronics Council's
AEC–Q200 qualification requirements and are manufactured in
state of the art ISO/TS 16949:2002 certified facilities.
X7R dielectric features a 125°C maximum operating temperature
and is considered “temperature stable,” The Electronics
Components, Assemblies and Materials Association (EIA)
characterizes X7R dielectric as a Class II material. Components of
this classification are fixed, ceramic dielectric capacitors suited for
bypass and decoupling applications or for frequency discriminating
circuits where Q and stability of capacitance characteristics are
not critical. X7R exhibits a predictable change in capacitance
with respect to time and voltage and boasts a minimal change in
capacitance with reference to ambient temperature. Capacitance
change is limited to ±15% from -55°C to +125°C.
Benefits
Applications
•
•
•
•
•
•
Typical applications include decoupling, bypass, filtering and
transient voltage suppression.
•
•
•
•
AEC–Q200 automotive qualified
-55°C to +125°C operating temperature range
Pb-Free and RoHS Compliant
Temperature stable dielectric
EIA 0402, 0603, 0805, 1206, 1210, 1812, and 2220, case sizes
DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V,
200 V, and 250 V
Capacitance offerings ranging from 150 pF to 22 μF
Available capacitance tolerances of ±5%, ±10%, and ±20%
Non-polar device, minimizing installation concerns
100% pure matte tin-plated termination finish allowing for
excellent solderability
Ordering Information
C
0805
C
225
M
4
R
Ceramic
Case Size
(L" x W")
Specification/
Series
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Dielectric
0402
0603
0805
1206
1210
1812
2220
1
2
C = Standard 2 Significant Digits J = ±5%
+ Number of Zeros K = ±10%
M = ±20%
9 = 6.3 V R = X7R
8 = 10 V
4 = 16 V
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
A = 250 V
A
C
Failure Rate/
Termination Finish1
Design
A = N/A
AUTO
Packaging/Grade
(C-Spec)3
C = 100% Matte Sn AUTO = Automotive
Grade 7" Reel
Unmarked
Additional termination finish options may be available. Contact KEMET for details
Additional reeling or packaging options may be available. Contact KEMET for details.
One WORLD
One Brand
One Strategy
One Focus
One Team
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One KEMET
C1023_X7R_AUTO_SMD • 6/11/2012
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Dimensions – Millimeters (Inches)
W
100% Tin or SnPb Plate
L
B
T
Nickel Plate
S
EIA
Size
Code
Metric
Size
Code
L
Length
0402
0603
0805
1206
1210
1005
1608
2012
3216
3225
1.00 (.040) ± 0.05 (.002)
1.60 (.063) ± 0.15 (.006)
2.00 (.079) ± 0.20 (.008)
3.20 (.126) ± 0.20 (.008)
3.20 (.126) ± 0.20 (.008)
1812
2220
4532
5650
4.50 (.177) ± 0.30 (.012) 3.20 (.126) ± 0.30 (.012)
5.70 (.224) ± 0.40 (.016) 5.00 (.197) ± 0.40 (.016)
W
Width
T
Thickness
0.50 (.020) ± 0.05 (.002)
0.80 (.032) ± 0.15 (.006)
1.25 (.049) ± 0.20 (.008)
See Table 2 for
1.60 (.063) ± 0.20 (.008)
Thickness
2.50 (.098) ± 0.20 (.008)
Conductive Metalization
Electrodes
B
Bandwidth
0.30 (.012) ± 0.10 (.004)
0.35 (.014) ± 0.15 (.006)
0.50 (0.02) ± 0.25 (.010)
0.50 (0.02) ± 0.25 (.010)
0.50 (0.02) ± 0.25 (.010)
0.60 (.024) ± 0.35 (.014)
0.60 (.024) ± 0.35 (.014)
S
Separation
Minimum
0.30 (.012)
0.70 (.028)
0.75 (.030)
N/A
Mounting
Technique
Solder Reflow Only
Solder Wave or
Solder Reflow
Solder Reflow Only
Qualification/Certification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
Environmental Compliance
Pb-Free and RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Capacitance Loss/Decade Hour)
Dielectric Withstanding Voltage (DWV)
Dissipation Factor (DF) Maximum Limit @ 25ºC
Insulation Resistance (IR) Limit @ 25°C
-55°C to +125°C
±15%
3.0%
250% of rated voltage
(5 ±1 seconds and charge/discharge not exceeding 50 mA)
5%(10 V), 3.5%(16 and 25 V) and 2.5%(50 to 250 V)
See Insulation Resistance Limit Table
(Rated voltage applied for 120 ±5 seconds @ 25°C)
Regarding aging rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 kHz ±50 Hz and 1.0 ±0.2 Vrms if capacitance ≤ 10 µF
120 Hz ±10 Hz and 0.5 ±0.1 Vrms if capacitance >10 µF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
Rated DC
Voltage
Capacitance
Value
Dissipation Factor
(Maximum %)
> 25
X7R
16/25
Capacitance
Shift
Insulation
Resistance
± 20%
10% of Initial Limit
3.0
All
< 16
5.0
7.5
Insulation Resistance Limit Table
EIA Case Size
0201
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
1,000 Megohm
Microfarads or 100 GΩ
N/A
< 0.012 µF
< 0.047 µF
< 0.047 µF
< 0.22 µF
< 0.39 µF
ALL
< 2.2 µF
ALL
< 10 µF
ALL
500 Megohm
Microfarads or 10 GΩ
ALL
≥ 0.012 µF
≥ 0.047 µF
≥ 0.047 µF
≥ 0.22 µF
≥ 0.39 µF
N/A
≥ 2.2 µF
N/A
≥ 10 µF
N/A
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Table 1A – Capacitance Range/Selection Waterfall (0402 – 1206 Case Sizes)
1
2
9
8
4
3
5
1
2
A
9
8
4
3
5
1
2
A
Voltage DC
50
6.3
10
16
25
50
100
200
6.3
10
16
25
50
100
200
250
6.3
10
16
25
50
100
200
250
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
Voltage DC
10
5
6.3
3
50
4
25
8
10
9
16
5
10
Voltage Code
9
8
4
3
5
9
8
Series
C0402
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DC
DD
DD
DD
DD
DD
DD
DE
DE
DH
DH
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
DD
DD
DE
DE
DE
DE
DE
DG
DG
DG
DG
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DE
DE
DE
DG
DG
EB
EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
DC EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EF
ED
EF
ED
ED
EN
ED
EF
EF
EH
EH
EH
EH
200
6.3
10
16
25
50
100
200
250
4
3
5
1
2
9
8
4
3
5
1
2
A
Roll Over for
Order Info.
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EB
EB EC
EB EC
EB EB
EB EB
EB EB
EB EB
EC EC
EC EC
EC EC
EC EC
EC EM
EC EG
EC EG
EC EG
EC
ED
ED
ED
EH
EH
EH
EH
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
ED
ED
ED
ED
EM
EG
EG
250
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DC
DC
DC
DC
DC
DD
DD
DG
DD
DG
DG
DG
DG
200
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DC
DC
DC
DC
DC
DD
DD
DG
DD
DD
DD
DD
DD
DE
DG
DG
DG
100
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DC
DC
DC
DC
DC
DD
DD
DG
DD
DD
DD
DD
DD
DE
DG
DG
DG
25
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DC
DC
DC
DC
DC
DD
DD
DG
DD
DD
DD
DD
DD
DE
DG
DG
DG
50
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EG
EG
EG
EF
EF
EH
EH
EH
EH
16
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
C0805
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EF
ED
EF
ED
ED
EN
ED
EF
EF
EH
EH
EH
EH
10
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
C0603
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EF
ED
EF
ED
ED
EN
ED
EF
EF
EH
EH
EH
EH
6.3
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CD
CB
CB
CB
CB
100
Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions
50
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
25
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
16
Cap
Code
C1206
3
6.3
Cap
C0805
4
Cap Tolerance
10 – 91 pF 100 – 910
100 – 150 pF 101 – 821
180 – 820 pF
181
1,000 pF
102
1,200 pF
122
1,500 pF
152
1,800 pF
182
2,200 pF
222
2,700 pF
272
3,300 pF
332
3,900 pF
392
4,700 pF
472
5,600 pF
562
6,800 pF
682
8,200 pF
822
10,000 pF
103
12,000 pF
123
15,000 pF
153
18,000 pF
183
22,000 pF
223
27,000 pF
273
33,000 pF
333
39,000 pF
393
47,000 pF
473
56,000 pF
563
68,000 pF
683
82,000 pF
823
0.10 uF
104
0.12 uF
124
0.15 uF
154
0.18 uF
184
0.22 uF
224
0.27 uF
274
0.33 uF
334
0.39 uF
394
0.47 uF
474
0.56 uF
564
0.68 uF
684
0.82 uF
824
1.0 uF
105
1.2 uF
125
1.5 uF
155
1.8 uF
185
2.2 uF
225
2.7 uF
275
3.3 uF
335
3.9 uF
395
4.7 uF
475
5.6 uF
565
6.8 uF
685
8.2 uF
825
10 uF
106
12 uF
126
C0603
8
25
C0402
9
16
Series
Voltage Code
6.3
Cap
Cap
Code
9
8
4
3
5
1
2
A
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
ED
ED
ED
ED
EM
C1206
C1023_X7R_AUTO_SMD • 6/11/2012
4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Table 1B – Capacitance Range/Selection Waterfall (1210 – 2220 Case Sizes)
5
1
2
A
3
5
1
2
A
5
1
2
A
3
5
1
2
A
Voltage DC
25
50
100
200
250
25
50
100
200
250
50
100
200
250
25
50
100
200
250
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
FJ
FE
FF
FG
FC
FF
FG
FH
FH
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
FJ
FE
FF
FG
FC
FF
FG
FH
FH
Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
FJ
FE
FF
FG
FC
FF
FG
FH
FH
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
FJ
FG
FM
FG
FG
FH
FM
FK
FS
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FG
FG
FG
FG
FH
FM
FK
FS
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FD
FD
FD
FD
FD
FD
FD
FD
FD
FF
FG
FL
FM
FB
FB
FB
FB
FB
FE
FE
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FF
FG
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FF
FG
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GC
GC
GE
GE
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GC
GC
GE
GE
GO
GO
GK
GK
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GG
GG
GG
GG
GG
GG
GG
GG
GB
GB
GB
GB
GB
GB
GB
GB
GB
GD
GH
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GE
GG
GG
GG
GG
GG
GJ
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GE
GG
GG
GG
GG
GG
GJ
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HD
HD
HD
HD
HF
HF
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HD
HD
HD
HD
HF
HF
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HD
HD
HD
HD
HF
HF
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HD
HD
HD
HD
HF
HF
GK
JE
JE
JE
JE
JE
JE
JE
JE
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JC
JC
JC
JC
JC
JC
JC
JC
JC
JC
JD
JF
JE
JE
JE
JE
JE
JE
JE
JE
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JB
JC
JC
JC
JC
JD
JD
JF
JF
JC
JC
JD
JF
JF
JO
JE
JE
JE
JE
JE
JE
JE
JE
JB
JB
JB
JB
JB
JC
JC
JC
JC
JC
JC
JC
JC
JC
JC
JD
JD
JF
JF
JC
JC
JC
JC
JC
JC
JC
JC
JC
JC
JD
JD
JF
JF
JC
JC
JC
JC
JC
JC
JC
JC
JC
JC
JD
JD
JF
JF
FS
FS
Voltage DC
50
100
200
250
25
50
100
200
250
50
100
200
250
25
50
100
200
250
JO
25
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
16
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
10
Cap
Code
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
6.3
Cap
C2220
3
Cap Tolerance
10 – 91 pF 100 – 910
100 – 390 pF 101 – 391
470 – 820 pF 471 – 821
1,000 pF
102
1,200 pF
122
1,500 pF
152
1,800 pF
182
2,200 pF
222
2,700 pF
272
3,300 pF
332
3,900 pF
392
4,700 pF
472
5,600 pF
562
6,800 pF
682
8,200 pF
822
10,000 pF
103
12,000 pF
123
15,000 pF
153
18,000 pF
183
22,000 pF
223
27,000 pF
273
33,000 pF
333
39,000 pF
393
47,000 pF
473
56,000 pF
563
68,000 pF
683
82,000 pF
823
0.10 uF
104
0.12 uF
124
0.15 uF
154
0.18 uF
184
0.22 uF
224
0.27 uF
274
0.33 uF
334
0.39 uF
394
0.47 uF
474
0.56 uF
564
0.68 uF
684
0.82 uF
824
1.0 uF
105
1.2 uF
125
1.5 uF
155
1.8 uF
185
2.2 uF
225
2.7 uF
275
3.3 uF
335
3.9 uF
395
4.7 uF
475
5.6 uF
565
6.8 uF
685
8.2 uF
825
10 uF
106
12 uF
126
15 uF
156
18 uF
186
22 uF
226
C1825
4
16
Cap
Code
C1812
8
10
Cap
C1210
9
6.3
Series
Voltage Code
Voltage Code
9
8
4
3
5
1
2
A
3
5
1
2
A
5
1
2
A
3
5
1
2
A
Series
JO
C1210
C1812
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
C1825
C2220
C1023_X7R_AUTO_SMD • 6/11/2012
5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Table 2 – Chip Thickness/Packaging Quantities
Paper Quantity
Plastic Quantity
Thickness
Code
Case
Size
Thickness ±
Range (mm)
7" Reel
13" Reel
7" Reel
13" Reel
BB
CB
CD
DC
DD
DE
DG
DH
EB
EC
EN
ED
EE
EF
EM
EG
EH
FB
FC
FD
FE
FF
FG
FL
FH
FM
FJ
FK
FS
NA
NC
LD
LF
GB
GC
GD
GE
GH
GG
GK
GJ
GO
HB
HD
HF
JB
JC
JD
JE
JF
JO
0402
0603
0603
0805
0805
0805
0805
0805
1206
1206
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1706
1706
1808
1808
1812
1812
1812
1812
1812
1812
1812
1812
1812
1825
1825
1825
2220
2220
2220
2220
2220
2220
0.50 ± 0.05
0.80 ± 0.07
0.80 ± 0.15
0.78 ± 0.10
0.90 ± 0.10
1.00 ± 0.10
1.25 ± 0.15
1.25 ± 0.20
0.78 ± 0.10
0.90 ± 0.10
0.95 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.20 ± 0.15
1.25 ± 0.15
1.60 ± 0.15
1.60 ± 0.20
0.78 ± 0.10
0.90 ± 0.10
0.95 ± 0.10
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.40 ± 0.15
1.55 ± 0.15
1.70 ± 0.20
1.85 ± 0.20
2.10 ± 0.20
2.50 ± 0.20
0.90 ± 0.10
1.00 ± 0.15
0.90 ± 0.10
1.00 ± 0.15
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.30 ± 0.10
1.40 ± 0.15
1.55 ± 0.10
1.60 ± 0.20
1.70 ± 0.15
2.50 ± 0.20
1.10 ± 0.15
1.30 ± 0.15
1.50 ± 0.15
1.00 ± 0.15
1.10 ± 0.15
1.30 ± 0.15
1.40 ± 0.15
1.50 ± 0.15
2.40 ± 0.15
10,000
4,000
4,000
4,000
4,000
0
0
0
4,000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
50,000
10,000
10,000
10,000
10,000
0
0
0
10,000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2,500
2,500
2,500
4,000
4,000
4,000
2,500
2,500
2,500
2,500
2,000
2,000
4,000
4,000
4,000
2,500
2,500
2,500
2,000
2,000
2,000
2,000
2,000
1,000
4,000
4,000
2,500
2,500
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
0
0
0
0
0
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
8,000
4,000
10,000
10,000
10,000
10,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
2,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
2,000
Thickness
Code
Case
Size
Thickness ±
Range (mm)
7" Reel
13" Reel
7" Reel
13" Reel
Paper Quantity
Plastic Quantity
Package quantity based on finished chip thickness specifications
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351
EIA
Size
Code
Metric
Size
Code
01005
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
C
Y
X
V1
V2
C
Y
X
V1
V2
C
Y
X
V1
V2
0402
0.33
0.46
0.43
1.60
0.90
0.28
0.36
0.33
1.30
0.70
0.23
0.26
0.23
1.00
0.50
0201
0603
0.38
0.56
0.52
1.80
1.00
0.33
0.46
0.42
1.50
0.80
0.28
0.36
0.32
1.20
0.60
0402
1005
0.50
0.72
0.72
2.20
1.20
0.45
0.62
0.62
1.90
1.00
0.40
0.52
0.52
1.60
0.80
0603
1608
0.90
1.15
1.10
4.00
2.10
0.80
0.95
1.00
3.10
1.50
0.60
0.75
0.90
2.40
1.20
0805
2012
1.00
1.35
1.55
4.40
2.60
0.90
1.15
1.45
3.50
2.00
0.75
0.95
1.35
2.80
1.70
1206
3216
1.60
1.35
1.90
5.60
2.90
1.50
1.15
1.80
4.70
2.30
1.40
0.95
1.70
4.00
2.00
1210
3225
1.60
1.35
2.80
5.65
3.80
1.50
1.15
2.70
4.70
3.20
1.40
0.95
2.60
4.00
2.90
1808
4520
2.30
1.75
2.30
7.40
3.30
2.20
1.55
2.20
6.50
2.70
2.10
1.35
2.10
5.80
2.40
1812
4532
2.15
1.60
3.60
6.90
4.60
2.05
1.40
3.50
6.00
4.00
1.95
1.20
3.40
5.30
3.70
1825
4564
2.15
1.60
6.90
6.90
7.90
2.05
1.40
6.80
6.00
7.30
1.95
1.20
6.70
5.30
7.00
2220
5650
2.75
1.70
5.50
8.20
6.50
2.65
1.50
5.40
7.30
5.90
2.55
1.30
5.30
6.60
5.60
2225
5664
2.70
1.70
6.90
8.10
7.90
2.60
1.50
6.80
7.20
7.30
2.50
1.30
6.70
6.50
7.00
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder
processes. KEMET only recommends wave soldering of EIA 0603, 0805, and 1206 case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reflow for EIA case sizes 0603, 0805, and 1206
• All other EIA case sizes are limited to solder reflow only
Recommended Soldering Profile:
• KEMET recommends following the guidelines outlined in IPC/JEDEC J–STD–020
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Table 4 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Test or Inspection Method
Terminal Strength
JIS–C–6429
Appendix 1, Note: Force of 1.8 kg for 60 seconds.
Board Flex
JIS–C–6429
Appendix 2, Note: 2 mm (min) for all except 3 mm for C0G.
Magnification 50 X. Conditions:
Solderability
a) Method B, 4 hours @ 155°C, dry heat @ 235°C
J–STD–002
b) Method B @ 215°C category 3
c) Method D, category 3 @ 260°C
Temperature Cycling
JESD22 Method JA–104
1,000 cycles (-55°C to +125°C). Measurement at 24 hours +/- 2 hours after test conclusion.
Load Humidity: 1,000 hours 85°C / 85% RH and 300 VDC maximum. Add 100 K ohm resistor.
Measurement at 24 hours +/- 2 hours after test conclusion.
Low Volt Humidity: 1,000 hours 85°C / 85%RH and 1.5 V. Add 100 K ohm resistor. Measurement at
24 hours +/- 2 hours after test conclusion.
t = 24 hours/cycle. Steps 7a and 7b not required. Unpowered. Measurement at 24 hours +/- 2 hours
after test conclusion.
-55°C / +125°C. Note: Number of cycles required – 300. Maximum transfer time – 20 seconds.
Dwell time – 15 minutes. Air – Air.
Biased Humidity
MIL–STD–202 Method 103
Moisture Resistance
MIL–STD–202 Method 106
Thermal Shock
MIL–STD–202 Method 107
High Temperature Life
MIL–STD–202 Method 108
1,000 hours at 125°C (85°C for X5R, Z5U and Y5V) with rated voltage applied.
Storage Life
MIL–STD–202 Method 108
150°C, 0 VDC for 1,000 hours.
Mechanical Shock
MIL–STD–202 Method 213
Figure 1 of Method 213, Condition F.
Resistance to Solvents
MIL–STD–202 Method 215
Add aqueous wash chemical, OKEM Clean or equivalent.
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 70%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of
receipt.
Construction
Reference
Item
Material
A
B
C
D
Finish
Termination
Barrier Layer
System
Base Metal
Inner Electrode
100% Matte Sn
Ni
Cu
Ni
E
Dielectric Material
BaTiO3
Note: Image is exaggerated in order to clearly identify all components of construction.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Tape & Reel Packaging Information
KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA
Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on
reeling quantities for commercial chips.
Bar Code Label
Anti-Static Reel
®
Embossed Plastic* or
Punched Paper Carrier.
ET
KEM
Chip and KPS Orientation in Pocket
(except 1825 Commercial, and 1825 and 2225 Military)
Sprocket Holes
Embossment or Punched Cavity
8 mm, 12 mm
or 16 mm Carrier Tape
178 mm (7.00")
or
330 mm (13.00")
Anti-Static Cover Tape
(.10 mm (.004") Maximum Thickness)
*EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only.
Table 5 – Carrier Tape Configuration – Embossed Plastic & Punched Paper (mm)
EIA Case Size
Tape Size (W)*
Lead Space (P1)*
01005 – 0402
8
2
0603 – 1210
8
4
1805 – 1808
12
4
≥ 1812
12
8
KPS 1210
12
8
KPS 1812 & 2220
16
12
Array 0508 & 0612
8
4
*Refer to Figures 1 & 2 for W and P1 carrier tape reference locations.
*Refer to Tables 6 & 7 for tolerance specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Po
E1
Ao
F
Ko
W
B1
E2
Bo
S1
P1
T1
Center Lines of Cavity
ØD 1
Cover Tape
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 5
User Direction of Unreeling
Table 6 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5 +0.10/-0.0 (0.059
+0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
E1
1.75 ±0.10
(0.069 ±0.004)
R Reference S1 Minimum
Note 2
Note 3
25.0
(0.984)
4.0 ±0.10
2.0 ±0.05 (0.079
0.600
(0.157 ±0.004)
±0.002)
(0.024)
30
(1.181)
P0
P2
T
Maximum
T1
Maximum
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
8 mm
Single (4 mm)
12 mm
Single (4 mm) &
Double (8 mm)
16 mm
Triple (12 mm)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
E2
Minimum
6.25
(0.246)
10.25
(0.404)
14.25
(0.561)
F
P1
3.5 ±0.05
4.0 ±0.10
(0.138 ±0.002) (0.157 ±0.004)
8.0 ±0.10 (0.315
5.5 ±0.05
±0.004)
(0.217 ±0.002)
5.5 ±0.05
8.0 ±0.10 (0.315
(0.217 ±0.002)
±0.004)
T2
Maximum
2.5
(0.098)
4.6
(0.181)
4.6
(0.181)
W
Maximum
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
A0,B0 & K0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 6).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 paragraph 4.3 section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
(e) for KPS Series product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket.
(f) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Figure 2 – Punched (Paper) Carrier Tape Dimensions
P2
T
Po
ØDo
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
A0
F
P1
T1
T1
Top Cover Tape
W
E2
B0
Bottom Cover Tape
G
Cavity Size,
See
Note 1, Table 7
Center Lines of Cavity
Bottom Cover Tape
User Direction of Unreeling
Table 7 – Punched (Paper) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
E1
P0
P2
T1 Maximum
G Minimum
8 mm
1.5 +0.10 -0.0
(0.059 +0.004 -0.0)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
0.10
(0.004) Maximum
0.75
(0.030)
R Reference
Note 2
25
(0.984)
T Maximum
W Maximum
A0 B 0
1.1
(0.098)
8.3
(0.327)
8.3
(0.327)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
8 mm
Half (2 mm)
8 mm
Single (4 mm)
E2 Minimum
6.25
(0.246)
F
3.5 ±0.05
(0.138 ±0.002)
P1
2.0 ±0.05
(0.079 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
Note 1
1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that:
a) the component does not protrude beyond either surface of the carrier tape.
b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
c) rotation of the component is limited to 20° maximum (see Figure 3).
d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4).
e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
2. The tape with or without components shall pass around R without damage (see Figure 6).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 3 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 4 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 5 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
C1023_X7R_AUTO_SMD • 6/11/2012
12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Figure 6 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
N
(See Note)
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 8 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Figure 7 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 8 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Figure 9 – Bulk Cassette Packaging (Ceramic Chips Only)
Meets Dimensional Requirements IEC–286 and EIAJ 7201
6 8 ± 0.1
8 8 ± 0.1
12.0 ± 0.1
Unit mm *Reference
19.0*
36 ± 00.2
31.5 ± 0.2
0
53 3*
10*
1.5 ±
2.0 ±
3.0 ±
0.1
0
0
0.1
0.2
0
5 0*
110 ± 0.7
Table 9 – Capacitor Dimensions for Bulk Cassette
Cassette Packaging – Millimeters
EIA Size
Code
Metric Size
Code
L Length
W Width
B Bandwidth
S Separation
Minimum
T Thickness
Number of
Pieces/Cassette
0402
1005
1.0 ±0.05
0.5 ±0.05
0.2 to 0.4
0.3
0.5 ±0.05
50,000
0603
1608
1.6 ±0.07
0.8 ±0.07
0.2 to 0.5
0.7
0.8 ±0.07
15,000
Table 10 – Capacitor Marking
Numeral
Alpha
Character
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
m
n
t
y
Capacitance (pF) For Various Numeral Identifiers
9
0.1
0.11
0.12
0.13
0.15
0.16
0.18
0.2
0.22
0.24
0.27
0.3
0.33
0.36
0.39
0.43
0.47
0.51
0.56
0.62
0.68
0.75
0.82
0.91
0.25
0.35
0.4
0.45
0.5
0.6
0.7
0.8
0.9
0
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
2.5
3.5
4
4.5
5
6
7
8
9
1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
25
35
40
45
50
60
70
80
90
2
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
250
350
400
450
500
600
700
800
900
3
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
2500
3500
4000
4500
5000
6000
7000
8000
9000
4
10000
11000
12000
13000
15000
16000
18000
20000
22000
24000
27000
30000
33000
36000
39000
43000
47000
51000
56000
62000
68000
75000
82000
91000
25000
35000
40000
45000
50000
60000
70000
80000
90000
5
100000
110000
120000
130000
150000
160000
180000
200000
220000
240000
270000
300000
330000
360000
390000
430000
470000
510000
560000
620000
680000
750000
820000
910000
250000
350000
400000
450000
500000
600000
700000
800000
900000
6
1000000
1100000
1200000
1300000
1500000
1600000
1800000
2000000
2200000
2400000
2700000
3000000
3300000
3600000
3900000
4300000
4700000
5100000
5600000
6200000
6800000
7500000
8200000
9100000
2500000
3500000
4000000
4500000
5000000
6000000
7000000
8000000
9000000
7
10000000
11000000
12000000
13000000
15000000
16000000
18000000
20000000
22000000
24000000
27000000
30000000
33000000
36000000
39000000
43000000
47000000
51000000
56000000
62000000
68000000
75000000
82000000
91000000
25000000
35000000
40000000
45000000
50000000
60000000
70000000
80000000
90000000
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Laser marking is available as an extracost option for most KEMET ceramic
chips. Such marking is two sided and
includes a K to identify KEMET, followed
by two characters (per EIA–198) to
identify the capacitance value. Note that
marking is not available for any Y5V chip.
ln addition, the 0603 marking option is
limited to the K only. (Marking Optional –
Not Available for 0402 Size)
Example shown is 1,000 pF capacitor
C1023_X7R_AUTO_SMD • 6/11/2012
15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
KEMET Corporation
World Headquarters
Europe
Asia
2835 KEMET Way
Simpsonville, SC 29681
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Northeast Asia
Paris, France
Tel: 33-1-4646-1009
Shenzhen, China
Tel: 86-755-2518-1306
Sasso Marconi, Italy
Tel: 39-051-939111
Beijing, China
Tel: 86-10-5829-1711
Milan, Italy
Tel: 39-02-57518176
Shanghai, China
Tel: 86-21-6447-0707
Fort Lauderdale, FL
Tel: 954-766-2800
Rome, Italy
Tel: 39-06-23231718
Taipei, Taiwan
Tel: 886-2-27528585
North America
Madrid, Spain
Tel: 34-91-804-4303
Southeast Asia
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Offices
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central Europe
Hong Kong
Tel: 852-2305-1168
Singapore
Tel: 65-6586-1900
Landsberg, Germany
Tel: 49-8191-3350800
Penang, Malaysia
Tel: 60-4-6430200
Dortmund, Germany
Tel: 49-2307-3619672
Bangalore, India
Tel: 91-806-53-76817
Kwidzyn, Poland
Tel: 48-55-279-7025
Central
Novi, MI
Tel: 248-994-1030
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
http://capacitoredge.kemet.com
SPICE & FIT Software
http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge
http://www.kemet.com/keask
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
Quality Documents
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Location
Website
Contact Us
Investor Relations
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
Call Us
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand,
email=marcybrand@kemet.com
Date: 2012.06.13 16:48:53 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1023_X7R_AUTO_SMD • 6/11/2012
18
