C0603X106J8NAC

P roduct Bulletin Surface Mount Ceramic Chip Capacitors – X8L Dielectric KEMET’s X8L Dielectric offers an operating temperature range from -55°C to +150°C with capacitance shift limited to ±15% from -55°C to +125°C and +15, -40% from 125°C to 150°C. Product applications include harsh environments such as Down Hole (Oil Exploration), Automotive (Under Hood), Military and Aerospace. Five standard package options are available which include EIA 0402, 0603, 0805, 1206, and 1210 case sizes. Devices are available in dc voltage ratings of 10V, 25V and 50V, with capacitance offerings ranging from 10pF to 0.22μF. Capacitance tolerances offerings include ±5%, ±10% and ±20. All parts are environmentally friendly, in compliance with RoHS legislation (RoHS 6/6) and are being offered in both commercial and automotive grades with 100% pure matte tin-plated terminations that allow for excellent solderability. A Sn/Pb termination option is also available upon request. Outline Drawing Dimensions - Millimeters (Inches) EIA SIZE CODE 0402 0603 0805 1206 1210 METRIC SIZE CODE 1005 1608 2012 3216 3225 L - LENGTH 1.0 (.04) ± .05 (.002) 1.6 (.063) ± .15 (.006) 2.0 (.079) ± .20 (.008) 3.2 (.126) ± .20 (.008) 3.2 (.126) ± .20 (.008) W - WIDTH 0.5 (.02) ± .05 (.002) 0.8 (.032) ± .15 (.006) 1.25 (.049) ± .20 (.008) 1.6 (.063) ± .20 (.008) 2.5 (.098) ± .20 (.008) B - BANDWIDTH 0.30 (.012) ±.10 (.004) 0.35 (.014) ± .15 (.006) 0.50 (.02) ± .25 (.010) 0.50 (.02) ± .25 (.010) 0.50 (.02) ± .25 (.010) S SEPARATION minimum 0.3 (.012) 0.7 (.028) 0.75 (.030) N/A N/A MOUNTING TECHNIQUE Solder Reflow Solder Wave + or Solder Reflow Solder Reflow © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4001 11/09 P roduct Bulletin Qualification Certification: Automotive Grade Available: AEC-Q200 Rev. C RoHS-PRC (6/6) - 100% matte Sn termination Electrical Parameters: As detailed in the KEMET Surface Mount Catalog F3102 for X8L, with following specific requirements based on room temperature (25°C) parameters: • Operating Temperature Range: -55°C to +150°C • Temperature Coefficient of Capacitance : ±15% (-55 to 125ºC) +15, -40% (125 to 150ºC) • Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000 megohm microfarads or 100GΩ, whichever of the two is smaller. • Capacitance and Dissipation Factor (DF) measured under the following conditions: 1kHz and 1 Vrms DF Limits are: 10 Volts: 3.5% 25 and 50 volts: 2.5% Ordering Information C Ceramic 1206 Case Size (L"x W") 0402 0603 0805 1206 1210 C Specification/ Series C = Standard X = Flexible Termination (Not available w/SnPd) 106 Capacitance Code (pF) 2 Sig. Digits + Number of Zeros K Capacitance Tolerance J = ±5% K = ±10% M = ±20% 8 Voltage 8 = 10V 3 = 25V 5 = 50V N Dielectric N = X8L A Failure Rate/ Design A = N/A C End Metallization (Plated) C = 100% Matte Sn L = SnPb (5% min) Soldering Process All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. The recommended techniques are as follows: • 0402 and ≥1210 Case Sizes - Solder Reflow Only • 0603/0805/1206 Case Sizes - Solder Wave/Solder Reflow Marking These chips will be supplied unmarked. If required, they can be laser-marked as an extra option. Details on the marking format are included in KEMET Surface Mount catalog F3102. In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4001 11/09 P roduct Bulletin © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4001 11/09 P roduct Bulletin Packaging Specifications © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4001 11/09