New Product Release
Surface Mount Ceramic Chip Capacitors Extended Values 0805, X7R Dielectric, 25, 50, 100, 200 Volts
25 Volts – 0.56µF 50 Volts – 0.12 - 0.22µF 100 Volts – 56,000 - 120,000pF 200 Volts – 8,200 - 56,000pF Outline Drawings
Table 1 Dimensions - Millimeters
EIA Metric Size Size Code Code (Ref) 0805* 2012 L# Length 2.0 (.079) ± 0.2 (.008) W# Width 1.25 (.049) ± 0.2 (.008) Thickness B Bandwidth 0.5 (.02) ± .25 (.010) S Min. Separation 0.75 (.030) Mounting Technique Solder Wave or Solder Reflow
See Table 2
Table 2 - Ratings & Part Number Listing
Cap Values 0.56µF 0.12µF 0.15µF 0.18µF 0.22µF 56,000pF 68,000pF 82,000pF 100,000pF 120,000pF 8,200pF 10,000pF 12,000pF 15,000pF 18,000pF 22,000pF 27,000pF 33,000pF 39,000pF 47,000pF 56,000pF KEMET Part Number C0805C564(1)3RAC C0805C124(1)5RAC* C0805C154(1)5RAC* C0805C184(1)5RAC* C0805C224(1)5RAC* C0805C563(1)1RAC C0805C683(1)1RAC C0805C823(1)1RAC C0805C104(1)1RAC C0805C124(1)1RAC C0805C822(1)2RAC C0805C103(1)2RAC C0805C123(1)2RAC C0805C153(1)2RAC C0805C183(1)2RAC C0805C223(1)2RAC C0805C273(1)2RAC C0805C333(1)2RAC C0805C393(1)2RAC C0805C473(1)2RAC C0805C563(1)2RAC Capacitance Tolerance Thickness - mm Qty 7” Reel J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M J,K,M 1.25 ± 0.15 .90 ± .10 .90 ± .10 .90 ± .10 .90 ± .10 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.25 ± 0.15 .78 ± 0.10 .78 ± 0.10 .78 ± 0.10 .78 ± 0.10 .78 ± 0.10 .78 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.25 ± 0.15 1.25 ± 0.15 2,500 4,000 4,000 4,000 4,000 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 Qty 13” Reel 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
To complete the KEMET part number, insert capacitance tolerance: J - ±5%, K - ±10% or M ±20%. * X7R Dielectric - Extended Range Values - Cap and DF measured at 0.5 Vrms.
F3273A 04/05
Electrical Parameters
As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements based on room temperature (25°C) parameters: • Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range • Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000 megohm microfarads or 100 gigohms, whichever is less. • Capacitance and Dissipation Factor (DF) measured at 1KHz at 1.0Vrms. 25 Volts - DF Limit is 3.5% >25 Volts - DF Limit is 2.5%
Soldering Process
Wave soldering or reflow soldering is acceptable for these chips.
Marking
These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option. More detail on the marking format is included in our Surface Mount Catalog F3102.
In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com