C0805C331JCTACAUTO

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Lead-free Overview KEMET’s X8G HV Class I dielectric features a 150°C maximum operating temperature, offering the latest in high temperature dielectric technology and reliability for extreme temperature applications and under the hood applications. X8G exhibits no change in capacitance with respect to voltage and boasts a minimal change in capacitance with reference to ambient temperature. It is a suitable replacement for higher capacitance and larger footprint devices that fail to offer capacitance stability. Capacitance change is limited to ±30ppm/°C from -55°C to +150°C. Driven by the demand for a more robust and reliable component, X8G dielectric capacitors were developed for critical applications where reliability and capacitance stability at higher operating temperatures are a concern. These capacitors are widely used in automotive for under the hood and harsh environment as well as general high temperature applications. In addition to commercial grade, automotive grade devices are available and meet Automotive Electronics Council’s AEC-Q200 qualification requirements. Also available with flexible termination technology which inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Benefits Applications • Operating temperature range of −55°C to +150°C • Capacitance offerings ranging from 1.0pF to 0.10μF • EIA 0603, 0805, 1206, 1210, 1812 and 2220 case sizes • DC voltage ratings of 500V, 630V, 1 KV, 1.5 KV and 2 KV • Extremely low ESR and ESL • High thermal stability • High ripple current capability • No capacitance shift with voltage • Negligible capacitance shift with respect to temperature • No piezoelectric noise • Lead (Pb)-Free, RoHS and REACH compliant • High frequency power converters • Wide bandgap (WBG), silicon carbide (SiC) and gallium nitride (GaN) systems • Snubber (high dV/dT) • Resonant circuits (LLC, Wireless Charging, etc.) • Timing • Filtering Built Into Tomorrow © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 1 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Ordering Information C Ceramic 2220 C 104 K Case Size Specification/ Capacitance Capacitance (L" x W") Series1 Code (pF) Tolerance 0603 0805 1206 1210 1812 2220 C = Standard X = Flexible Termination Two significant digits and number of zeros B = ±0.10 pF C = ±0.25 pF D = ±0.5 pF F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% B T A C AUTO Rated Voltage (VDC) Dielectric Failure Rate/Design Termination Finish2 Packaging/ Grade (C-Spec) T = X8G A = N/A C= 500 B = 630 D = 1,000 F = 1,500 G = 2,000 C = 100% Matte Sn L = SnPb (5% Pb minimum) See “Packaging C-Spec Ordering Options Table” The flexible termination option is not available on EIA 0402 case size product. “C” must be used in the 6th character position when ordering this case size. 2 Additional termination finish options may be available. Contact KEMET for details. 2 SnPb termination finish option is not available on automotive grade product. 1 Packaging C-Spec Ordering Options Table Packaging/Grade Ordering Code (C-Spec) Packaging Type Commercial Grade1 Bulk Bag 7" Reel/Unmarked 13" Reel/Unmarked 7" Reel/Unmarked/2 mm pitch2 13" Reel/Unmarked/2 mm pitch2 Not Required (Blank) TU 7411 (EIA 0603 and smaller case sizes) 7210 (EIA 0805 and larger case sizes) 7081 7082 Automotive Grade3 7" Reel 13" Reel/Unmarked 7" Reel/Unmarked/2 mm pitch2 13" Reel/Unmarked/2 mm pitch2 AUTO AUTO7411 (EIA 0603 and smaller case sizes) AUTO7210 (EIA 0805 and larger case sizes) 3190 3191 Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging. The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain capacitors that have not been laser marked. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel Packaging Quantities” and “Tape & Reel Packaging Information”. 3 For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information see “Capacitor Marking”. 1 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 2 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Automotive C-Spec Information KEMET automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualifi cation for Passive Components. These products are supported by a Product Change Notifi cation (PCN) and Production Part Approval Process warrant (PPAP). Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, “AUTO.” This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade component without the requirement to submit a customer Source Controlled Drawing (SCD) or specifi cation for review by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET OEM automotive customers and are not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited (see details below.) Product Change Notification (PCN) The KEMET product change notifi cation system is used to communicate primarily the following types of changes: • Product/process changes that affect product form, fi t, function, and/or reliability • Changes in manufacturing site • Product obsolescence Process/Product change Obsolescence* Days Prior To Implementation KEMET assigned Yes (with approval and sign off) Yes 180 days minimum AUTO Yes (without approval) Yes 90 days minimum 1 1 Customer Notification Due To: KEMET Automotive C-Spec KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. Production Part Approval Process (PPAP) The purpose of the Production Part Approval Process is: • To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. • To provide the evidence that all customer engineering design records and specifi cation requirements are properly understood and fulfi lled by the manufacturing organization. • To demonstrate that the established manufacturing process has the potential to produce the part. PPAP (Product Part Approval Process) Level KEMET Automotive C-Spec 1 2 3 4 5 KEMET assigned1 ● ● ● ● ● AUTO 1 ○ KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. ● Part number specifi c PPAP available ○ Product family PPAP only © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 3 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Dimensions – Millimeters (Inches) L W B T S Standard Termination EIA Size Code Metric Size Code 0603 1608 0805 2012 1206 3216 1210 3225 1812 4532 2220 5650 L Length W Width T Thickness B Bandwidth 1.60 (0.063) ±0.15 (0.006) 2.00 (0.079) ±0.20 (0.008) 3.20 (0.126) ±0.20 (0.008) 3.20 (0.126) ±0.20 (0.008) 4.50 (0.177) ±0.30 (0.012) 5.70 (0.224) ±0.40 (0.016) 0.80 (0.032) ±0.15 (0.006) 1.25 (0.049) ±0.20 (0.008) 1.60 (0.063) ±0.20 (0.008) 2.50 (0.098) ±0.20 (0.008) 3.20 (0.126) ±0.30 (0.012) 5.00 (0.197) ±0.40 (0.016) See Table 2 for Thickness 0.35 (0.014) ±0.15 (0.006) 0.50 (0.02) ±0.25 (0.010) 0.50 (0.02) ±0.25 (0.010) 0.50 (0.02) ±0.25 (0.010) 0.60 (0.024) ±0.35 (0.014) 0.60 (0.024) ±0.35 (0.014) L Length W Width T Thickness B Bandwidth 1.60 (0.063) ±0.17 (0.007) 2.00 (0.079) ±0.30 (0.012) 3.30 (0.130) ±0.40 (0.016) 3.30 (0.130) ±0.40 (0.016) 4.50 (0.178) ±0.40 (0.016) 5.90 (0.232) ±0.75 (0.030) 0.80 (0.032) ±0.15 (0.006) 1.25 (0.049) ±0.30 (0.012) 1.60 (0.063) ±0.35(0.013) 2.60(0.102) ±0.30(0.012) 3.20 (0.126) ±0.30 (0.012) 5.00 (0.197) ±0.40 (0.016) See Table 2 for Thickness 0.45 (0.018) ±0.15 (0.006) 0.50 (0.02) ±0.25 (0.010) 0.60 (0.024) ±0.25 (0.010) 0.60 (0.024) ±0.25 (0.010) 0.70 (0.028) ±0.35 (0.014) 0.70 (0.028) ±0.35 (0.014) S Separation Minimum 0.70 (0.028) 0.75 (0.030) N/A Mounting Technique Solder Wave or Solder Reflow Solder Reflow Only Flexible Termination EIA Size Code Metric Size Code 0603 1608 0805 2012 1206 3216 1210 3225 1812 4532 2220 5650 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com S Separation Minimum 0.58 (0.023) 0.75 (0.030) N/A Mounting Technique Solder Wave or Solder Reflow Solder Reflow Only C1112_X8G_HV_HT_SMD • 3/2/2022 4 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Qualification/Certification Commercial grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. Environmental Compliance Lead-free Lead (Pb)-free, RoHS, and REACH compliant without exemptions (excluding SnPb termination finish option). Dielectric Withstanding Voltage (DWV) EIA Case Size 500V 0603 1206 1210 1812 1825 2220 2225 ≥ 1000V 130% of rated voltage 0805 1808 630V 150% of rated voltage < 620pF 150% of rated voltage ≥ 620pF 130% of rated voltage < 5.1nF 150% of rated voltage ≥ 5.1nF 130% of rated voltage < 7.5nF 150% of rated voltage ≥ 7.5nF 130% of rated voltage < 5.1nF 150% of rated voltage ≥ 5.1nF 130% of rated voltage < 12nF 150% of rated voltage ≥ 12nF 130% of rated voltage < 22nF 150% of rated voltage ≥ 22nF 130% of rated voltage < 27nF 150% of rated voltage ≥ 27nF 130% of rated voltage < 33nF 150% of rated voltage ≥ 33nF 130% of rated voltage 120% of rated voltage © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 5 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1A – Standard Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) Case Size/Series C0603C C0805C 1,000 1,500 2,000 GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GH GH GH GH GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GD GD GD GD GH GH GH GH GK GK GM GM GO GO JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK 1,000 1,500 2,000 G 500 F 630 D 500 1,000 B 630 500 630 C FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FS FS FS FS FS FS FS FS C C B D F G C B D F G C1206C 1,500 G 2,000 F 630 D 1,000 B 500 C 1,500 D 2,000 B 630 C 1,000 D 500 B 630 C 1,000 500 Voltage Code 1,000 Rated Voltage (VDC) 500 Cap Code G 1,500 F 2,000 D 1,500 B 2,000 C 1,000 G 500 F C2220C 630 D 1,500 B 2,000 630 C 109 - 919* B C D DG DG DG 100 - 470* F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 110 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 120 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 130 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 150 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 160 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 180 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 200 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 220 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 240 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 270 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 300 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 330 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 360 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 390 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 430 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 470 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 510 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 560 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 620 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 680 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM 750 F G J K M DG DG DG ED ED ED ED EF FM FM FM FM 820 F G J K M DG DG DG ED ED ED ED EF FM FM FM FM 910 F G J K M DG DG DG ED ED ED ED EF FM FM FM FM 101 F G J K M CG CG CG DG DG DG ED ED ED ED EF FM FM FM FM 111 F G J K M CG CG CG DG DG DG ED ED ED ED EG FM FM FM FM 121 F G J K M CG CG CG DG DG DG ED ED ED ED EG FG FG FG FM 131 F G J K M CG CG CG DG DG DG ED ED ED ED EG FG FG FG FM 151 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM 161 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM 181 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM 201 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM 221 F G J K M CG CG CG DG DG DG ED ED ED EG EG FG FG FG FM 241 F G J K M CG CG DG DG DG ED ED ED EG EG FG FG FG FM 271 F G J K M CG CG DG DG DG ED ED ED EG EG FG FG FG FK 301 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK 331 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK 361 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK 391 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK 431 F G J K M CG CG DG DG DP ED ED EF EG FG FM FM FS 471 F G J K M CG CG DG DG DP ED ED EG EG FG FM FM FS 511 F G J K M CG CG DG DG DP ED ED EG EG FG FM FM FS 561 F G J K M CG CG DG DG DG ED ED EG EG FG FM FM FS 621 F G J K M CG CG DG DG DG ED ED EG FG FM FM FS 681 F G J K M CG CG DG DG DG ED ED EG FG FM FM FS 751 F G J K M DG DG DG ED EF EG FG FM FM FM 821 F G J K M DG DG DG ED EF EG FG FM FM FM 911 F G J K M DN DN ED EF EG FM FM FM FY 102 F G J K M DN DN ED EF EG FM FM FM FY 112 F G J K M DN DN EF EG ED FM FK FK FS 122 F G J K M DN DN EF EG ED FM FK FK FS 630 Capacitance G C1812C Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions Capacitance Tolerance 1.0 - 9.1 pF* 10 pF - 47pF* 11 pF 12 pF 13 pF 15 pF 16 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 43 pF 47 pF 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF 110 pF 120 pF 130 pF 150 pF 160 pF 180 pF 200 pF 220 pF 240 pF 270 pF 300 pF 330 pF 360 pF 390 pF 430 pF 470 pF 510 pF 560 pF 620 pF 680 pF 750 pF 820 pF 910 pF 1,000 pF 1,100 pF 1,200 pF F 630 D 1,000 B 500 C 1,500 D C1210C 2,000 B 1,000 C 500 D 630 B C1206C 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805C 630 Case Size/Series C0603C B D F G C1210C © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1812C C2220C C1112_X8G_HV_HT_SMD • 3/2/2022 6 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1A – Standard Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) cont. 1,500 2,000 JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JK JK JL JL JL JN JE JE JK JL JN JK JK JK JK JE JE JE JE JE JK JK JK JK JL JL JN JN JN JE JE JE JE JK JK JL JL JL JN JN JN F G C B D F G C B D F G C1210C © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com 1,500 JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JE JK JL JL JN JN JE JE JE JK JL JL JN 1,500 D 2,000 GH GO JE GK GO JE GK JE GM JE GM JE GO JE GO JK GO JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JL JN JE JE JK JL JL JN 1,000 GB GB GD GD GH GH GK GK GK GK GM GM GO GO GO GO GH GH GK GK GM GM GO GO 500 GB GB GD GD GH GH GH GH GH GH GH GH GH GH GK GK GK GM GM GO GO GO GH GH GH GH GK GM GO GO 630 GB GB GB GB GB GB GB GB GB GB GB GB GH GH GH GH GH GH GH GK GM GM GO GO GH GH GK GM GO GO 2,000 B G 1,000 C F 1,000 G D 500 F C1206C B 630 D FS FS FS FS FS FS FS FS FF FG FG FL FL FM FM FM FY FY FS FS FS FS C 500 B FS FS FS FS FL FL FL FL FL FM FM FY FY FY FS FS FE FE FF FF FF FG FG FM FM FY FS FS G 630 C FM FK FK FK FK FK FS FS FS FS FL FL FM FM FY FY FY FY FS FS FF FG FG FM FM FY FS FS F 1,500 D 2,000 B 1,000 1,500 2,000 C 500 G 630 F 1,500 D ED ED ED EF EF EF EG EG 630 B C0805C EG EG EG EG EB EB EB EB EB EB EC EC ED ED EE EF EF EG EG EG EG EH 1,000 C EF EF EF EF EG EG EG EG EB EB EC EC ED ED EE EF EF EG EG EG EG EH 500 D D 1,500 B C0603C B 2,000 C C C2220C 2,000 630 DN DP DP DG DG DG DG DG 630 Voltage Code Case Size/Series DN DP DP DG DG DG DG DG 1,000 Rated Voltage (VDC) M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 630 K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K 1,000 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 500 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 1,000 Capacitance Cap Code F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 500 132 152 162 182 202 222 242 272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 123 153 183 223 273 333 393 473 563 683 823 104 630 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF 5,600 pF 6,200pF 6,800pF 7,500pF 8,200 pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 56,000 pF 68,000 pF 82,000 pF 0.1 µF G C1812C Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions 500 Capacitance Tolerance F 630 D 1,000 B 500 C 1,500 D C1210C 2,000 B 1,000 C 500 D 630 B C1206C 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805C 630 Case Size/Series C0603C C1812C C2220C C1112_X8G_HV_HT_SMD • 3/2/2022 7 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1B – Flexible Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) Case Size/Series 1,000 1,500 2,000 FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FM FM FM FM FM FM FM FM FM FM FK FK FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FM FM FM FM FM FM FM FM FM FM FK FK FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FK FK FS FS FS FS FS FS FM FM FY FY FS FS FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FS FS FS FS FS FS FS FS GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GH GH GH GH GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GD GD GD GD GH GH GH GH GK GK GM GM GO GO JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK 1,000 1,500 2,000 C B D F G C B D F G C B D F G 630 500 G 630 F 500 D 630 1,000 B 1,500 500 630 C 2,000 1,500 2,000 G 1,500 F 2,000 D 1,000 B 500 C 630 G 1,500 F 2,000 D 1,000 B 630 630 C ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES EF EF EF EF EU EU EU EU EU EU EU EU EU EU C0603X C C0805X 1,500 D 2,000 B 630 C 1,000 D 500 B 630 C 1,000 Voltage Code 500 Rated Voltage (VDC) 1,000 Cap Code 500 109 - 169* B C D DG DG DG 100 F G J K M DG DG DG ES ES ES ES 110 F G J K M DG DG DG ES ES ES ES 120 F G J K M DG DG DG ES ES ES ES 130 F G J K M DG DG DG ES ES ES ES 150 F G J K M DG DG DG ES ES ES ES 160 F G J K M DG DG DG ES ES ES ES 180 F G J K M DG DG DG ES ES ES ES 200 F G J K M DG DG DG ES ES ES ES 220 F G J K M DG DG DG ES ES ES ES 240 F G J K M DG DG DG ES ES ES ES 270 F G J K M DG DG DG ES ES ES ES 300 F G J K M DG DG DG ES ES ES ES 330 F G J K M DG DG DG ES ES ES ES 360 F G J K M DG DG DG ES ES ES ES 390 F G J K M DG DG DG ES ES ES ES 430 F G J K M DG DG DG ES ES ES ES 470 F G J K M DG DG DG ES ES ES ES 510 F G J K M DG DG DG ES ES ES ES 560 F G J K M DG DG DG ES ES ES ES 620 F G J K M DG DG DG ES ES ES ES 680 F G J K M DG DG DG ES ES ES ES 750 F G J K M DG DG DG ES ES ES ES 820 F G J K M DG DG DG ES ES ES ES 910 F G J K M DG DG DG ES ES ES ES 101 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 111 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 121 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 131 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 151 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 161 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 181 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 201 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 221 F G J K M CJ CJ CJ DG DG DG ES ES ES EU 241 F G J K M CJ CJ DG DG DG ES ES ES EU 271 F G J K M CJ CJ DG DG DG ES ES ES EU 301 F G J K M CJ CJ DG DG DC ES ES EF EU 331 F G J K M CJ CJ DG DG DC ES ES EF EU 361 F G J K M CJ CJ DG DG DC ES ES EF EU 391 F G J K M CJ CJ DG DG DC ES ES EF EU 431 F G J K M CJ CJ DG DG DD ES ES EF EU 471 F G J K M CJ CJ DG DG DD ES ES EU EU 511 F G J K M CJ CJ DG DG DD ES ES EU EU 561 F G J K M CJ CJ DG DG DG ES ES EU EU 621 F G J K M CJ CJ DG DG DG ES ES EU 681 F G J K M CJ CJ DG DG DG ES ES EU 751 F G J K M DG DG DG ES EF EU 821 F G J K M DG DG DG ES EF EU 911 F G J K M DC DC ES EF EU 102 F G J K M DC DC ES EF EU 112 F G J K M DC DC EF EU ED 122 F G J K M DC DC EF EU ED 630 Capacitance G Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions Capacitance Tolerance 1.0 - 9.1 pF* 10 pF 11 pF 12 pF 13 pF 15 pF 16 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 43 pF 47 pF 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF 110 pF 120 pF 130 pF 150 pF 160 pF 180 pF 200 pF 220 pF 240 pF 270 pF 300 pF 330 pF 360 pF 390 pF 430 pF 470 pF 510 pF 560 pF 620 pF 680 pF 750 pF 820 pF 910 pF 1,000 pF 1,100 pF 1,200 pF F C2220X 1,000 D 500 B C1812X 500 C 1,500 D C1210X 2,000 B 1,000 C 500 D 630 B C1206X 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805X 630 Case Size/Series C0603X B D F G C1206X C1210X © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1812X C2220X C1112_X8G_HV_HT_SMD • 3/2/2022 8 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1B – Flexible Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) cont. 1,500 2,000 JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JK JK JL JL JL JN JE JE JK JL JN JK JK JK JK JE JE JE JE JE JK JK JK JK JL JL JN JN JN JE JE JE JE JK JK JL JL JL JN JN JN F G C B D F G C B D F G C1210X © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com 1,500 JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JE JK JL JL JN JN JE JE JE JK JL JL JN 1,500 D 2,000 GH GO JE GK GO JE GK JE GM JE GM JE GO JE GO JK GO JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JL JN JE JE JK JL JL JN 1,000 GB GB GD GD GH GH GK GK GK GK GM GM GO GO GO GO GH GH GK GK GM GM GO GO 500 GB GB GD GD GH GH GH GH GH GH GH GH GH GH GK GK GK GM GM GO GO GO GH GH GH GH GK GM GO GO 630 GB GB GB GB GB GB GB GB GB GB GB GB GH GH GH GH GH GH GH GK GM GM GO GO GH GH GK GM GO GO 2,000 B G 1,000 C F 1,000 G D 500 F C1206X B 630 D FS FS FS FS FS FS FS FS FF FG FG FL FL FM FM FM FY FY FS FS FS FS C 500 B FS FS FS FS FL FL FL FL FL FM FM FY FY FY FS FS FE FE FF FF FF FG FG FM FM FY FS FS G 630 C FM FK FK FK FK FK FS FS FS FS FL FL FM FM FY FY FY FY FS FS FF FG FG FM FM FY FS FS F 1,500 D 2,000 B 1,000 1,500 2,000 C 500 G 630 F 1,500 D ED ED ED EF EF EF EU EU 630 B C0805X EU EU EU EU EQ EQ EQ EQ EQ EQ ER ER ES ES EE EF EF EU EU EU EU EU 1,000 C EF EF EF EF EU EU EU EU EQ EQ ER ER ES ES EE EF EF EU EU EU EU EU 500 D D 1,500 B C0603X B 2,000 C C C2220X 2,000 630 DC DD DD DG DG DG DG DG 630 Voltage Code Case Size/Series DC DD DD DG DG DG DG DG 1,000 Rated Voltage (VDC) M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 630 K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K 1,000 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 500 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 1,000 Capacitance Cap Code F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 500 132 152 162 182 202 222 242 272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 123 153 183 223 273 333 393 473 563 683 823 104 630 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF 5,200 pF 6,200pF 6,800pF 7,500pF 8,200pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 56,000 pF 68,000 pF 82,000 pF 0.1 µF G C1812X Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions 500 Capacitance Tolerance F 630 D 1,000 B 500 C 1,500 D C1210X 2,000 B 1,000 C 500 D 630 B C1206X 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805X 630 Case Size/Series C0603X C1812X C2220X C1112_X8G_HV_HT_SMD • 3/2/2022 9 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1C – Automotive Standard Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) 2,000 G 1,500 F JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JL JL JN JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JE JE JE JE JK JK JL JL JL JN JN JN 1,500 D 2,000 B 1,000 C 1,000 G 500 F 630 D 1,500 B 2,000 C 1,000 G 500 F 630 D 1,500 B 2,000 630 C C2220C D F G Case Size/Series C0603C C0805C C1206C C1210C © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com B D 500 C 630 G 1,500 F 2,000 D 1,000 B 500 C 630 G 1,500 F 2,000 D 630 B 1,000 C 500 D 1,500 B 2,000 C 630 D 500 B 630 C 1,000 500 Voltage Code 1,000 Rated Voltage (VDC) 500 Cap Code 1,000 Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions 630 Capacitance G C1812C 109 - 919* B C D DG DG DG 100 - 470* F G J K M DG DG DG ED ED ED ED ED FM FM FM FM FM GB GB GB GB GB JK 510 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM FM GB GB GB GB GB JK 560 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM FM GB GB GB GB GB JK 620 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM FM GB GB GB GB GB JK 680 F G J K M DG DG DG ED ED ED ED ED FM FM FM FM FM GB GB GB GB GB JK 750 F G J K M DG DG DG ED ED ED ED EF FM FM FM FM FM GB GB GB GB GB JK 820 F G J K M DG DG DG ED ED ED ED EF FM FM FM FM FM GB GB GB GB GB JK 910 F G J K M DG DG DG ED ED ED ED EF FM FM FM FM FM GD GD GD GD GD JK 101 F G J K M CG CG CG DG DG DG ED ED ED ED EF FM FM FM FM FM GD GD GD GD GD JK 111 F G J K M CG CG CG DG DG DG ED ED ED ED EG FM FM FM FM FM GD GD GD GD GD JK 121 F G J K M CG CG CG DG DG DG ED ED ED ED EG FG FG FG FM FM GD GD GD GD GD JK 131 F G J K M CG CG CG DG DG DG ED ED ED ED EG FG FG FG FM FM GD GD GD GD GD JK 151 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM FM GD GD GD GD GD JK 161 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM FM GD GD GD GD GD JK 181 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM FM GD GD GD GD GD JK 201 F G J K M CG CG CG DG DG DG ED ED ED EF EG FG FG FG FM FM GD GD GD GD GD JK 221 F G J K M CG CG CG DG DG DG ED ED ED EG EG FG FG FG FM FM GB GB GB GB GB JK 241 F G J K M CG CG DG DG DG ED ED ED EG EG FG FG FG FM FM GB GB GB GB GB JK 271 F G J K M CG CG DG DG DG ED ED ED EG EG FG FG FG FK FK GB GB GB GB GB JK 301 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK FK GB GB GB GB GB JK 331 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK FK GB GB GB GB GB JE 361 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK FS GB GB GB GB GD JE 391 F G J K M CG CG DG DG DN ED ED EF EG FG FG FG FK FS GB GB GB GB GD JE 431 F G J K M CG CG DG DG DP ED ED EF EG FG FM FM FS FS GB GB GB GB GD JE 471 F G J K M CG CG DG DG DP ED ED EG EG FG FM FM FS FS GB GB GB GB GD JE 511 F G J K M CG CG DG DG DP ED ED EG EG FG FM FM FS FS GB GB GB GD GH JK 561 F G J K M CG CG DG DG DG ED ED EG EG FG FM FM FS FS GB GB GB GD GH JK 621 F G J K M CG CG DG DG DG ED ED EG FG FM FM FS FS GB GB GB GD GH JK 681 F G J K M CG CG DG DG DG ED ED EG FG FM FM FS FS GB GB GB GD GH JE 751 F G J K M DG DG DG ED EF EG FG FM FM FM GB GB GB GD GK JE 821 F G J K M DG DG DG ED EF EG FG FM FM FM GB GB GB GD GK JE 911 F G J K M DN DN ED EF EG FM FM FM FY GB GB GB GH GM JE 102 F G J K M DN DN ED EF EG FM FM FM FY GB GB GB GH GM JE 112 F G J K M DN DN EF EG ED FM FK FK FS GB GB GB GH GO JE 122 F G J K M DN DN EF EG ED FM FK FK FS GB GB GB GH GO JE 132 F G J K M DN DN EF EG ED FM FS FS GB GB GB GH GO JE 152 F G J K M DP DP EF EG ED FK FS FS GB GB GB GK GO JE 162 F G J K M DP DP EF EG ED FK FS FS GB GD GD GK JE 182 F G J K M DG DG EF EG EF FK FS FS GB GD GD GM JE 202 F G J K M DG DG EG EB EF FK FL FS GB GH GH GM JE DG DG EG EB EF FK FL FS GB GH GH GO JE 222 F G J K M 242 F G J K M DG DG EG EB EG FS FL FS GB GH GK GO JK 272 F G J K M DG DG EG EB EG FS FL FS GB GH GK GO JK 302 F G J K M EB EB FS FL FF GB GH GK JK 332 F G J K M EB EB FS FM FG GB GH GK JK 362 F G J K M EC EC FL FM FG GB GH GM JK 392 F G J K M EC EC FL FY FL GB GH GM JK 432 F G J K M ED ED FM FY FL GH GH GO JK 472 F G J K M ED ED FM FY FM GH GH GO JK 512 F G J K M EE EE FY FS FM GH GK GO JK 562 F G J K M EF EF FY FS FM GH GK GO JK Rated Voltage (VDC) Capacitance Tolerance 1.0 - 9.1 pF* 10 pF - 47pF* 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF 110 pF 120 pF 130 pF 150 pF 160 pF 180 pF 200 pF 220 pF 240 pF 270 pF 300 pF 330 pF 360 pF 390 pF 430 pF 470 pF 510 pF 560 pF 620 pF 680 pF 750 pF 820 pF 910 pF 1,000 pF 1,100 pF 1,200 pF 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF 5,600 pF F 630 D 1,000 B 500 C 1,500 D C1210C 2,000 B 1,000 C 500 D 630 B C1206C 1,000 C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805C 630 Case Size/Series C0603C F G C B C1812C C2220C C1112_X8G_HV_HT_SMD • 3/2/2022 10 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1C – Automotive Standard Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) cont. B D F G C B D C1210C © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com 2,000 JE JN JK JN JK JL JL JL JN JE JE JK JL JN F G C B D F G C1812C 1,500 JE JE JE JE JE JE JK JL JL JN JN JE JE JE JK JL JL JN 1,500 1,500 2,000 JK JK JK JK JE JE JE JE JE JK JL JN JE JE JK JL JL JN 2,000 C G 1,000 G GH GH GK GK GM GM GO GO 1,000 F GK GM GM GO GO GO GH GH GH GH GK GM GO GO 500 D C1206C GH GH GH GK GM GM GO GO GH GH GK GM GO GO 630 B FY FY FS FS FS FS 1,500 C FE FE FF FF FF FG FG FM FM FY FS FS F 1,000 D 500 B 630 C 500 G 630 F 1,500 D C2220C 2,000 B 1,000 1,500 C 500 G 630 F 2,000 D FY FY FS FS FF FG FG FM FM FY FS FS 630 B C0805C D 1,000 C B 500 D 1,500 B C0603C C 2,000 630 1,000 C EF EG EG EG EG EH 2,000 Voltage Code Case Size/Series EF EG EG EG EG EH 630 Rated Voltage (VDC) M M M M M M M M M M M M M M M M M M 630 K K K K K K K K K K K K K K K K K K 1,000 J J J J J J J J J J J J J J J J J J 500 G G G G G G G G G G G G G G G G G G 1,000 Capacitance Cap Code F F F F F F F F F F F F F F F F F F 500 622 682 752 822 912 103 123 153 183 223 273 333 393 473 563 683 823 104 630 6,200pF 6,800pF 7,500pF 8,200 pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 56,000 pF 68,000 pF 82,000 pF 0.1 µF G C1812C Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions 500 Capacitance Tolerance F 630 D 1,000 B 500 C 1,500 D 2,000 B C1210C 1,000 C 500 D 630 B C1206C 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805C 630 Case Size/Series C0603C C2220C C1112_X8G_HV_HT_SMD • 3/2/2022 11 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1D – Automotive Flexible Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) Case Size/Series 1,000 1,500 2,000 FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FM FM FM FM FM FM FM FM FM FM FK FK FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FZ FM FM FM FM FM FM FM FM FM FM FK FK FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FK FK FS FS FS FS FS FS FM FM FY FY FS FS FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FS FS FS FS FS FS FS FS GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GH GH GH GH GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GD GD GD GD GD GD GD GD GD GB GB GB GB GB GD GD GD GD GH GH GH GH GK GK GM GM GO GO JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK 1,000 1,500 2,000 C B D F G C B D F G C B D F G 630 500 G 630 F 500 D 630 1,000 B 1,500 500 630 C 2,000 1,500 2,000 G 1,500 F 2,000 D 1,000 B 500 C 630 G 1,500 F 2,000 D 1,000 B 630 630 C ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES ES EF EF EF EF EU EU EU EU EU EU EU EU EU EU C0603X C C0805X 1,500 D 2,000 B 630 C 1,000 D 500 B 630 C 1,000 Voltage Code 500 Rated Voltage (VDC) 1,000 Cap Code 500 109 - 169* B C D DG DG DG 100 F G J K M DG DG DG ES ES ES ES 110 F G J K M DG DG DG ES ES ES ES 120 F G J K M DG DG DG ES ES ES ES 130 F G J K M DG DG DG ES ES ES ES 150 F G J K M DG DG DG ES ES ES ES 160 F G J K M DG DG DG ES ES ES ES 180 F G J K M DG DG DG ES ES ES ES 200 F G J K M DG DG DG ES ES ES ES 220 F G J K M DG DG DG ES ES ES ES 240 F G J K M DG DG DG ES ES ES ES 270 F G J K M DG DG DG ES ES ES ES 300 F G J K M DG DG DG ES ES ES ES 330 F G J K M DG DG DG ES ES ES ES 360 F G J K M DG DG DG ES ES ES ES 390 F G J K M DG DG DG ES ES ES ES 430 F G J K M DG DG DG ES ES ES ES 470 F G J K M DG DG DG ES ES ES ES 510 F G J K M DG DG DG ES ES ES ES 560 F G J K M DG DG DG ES ES ES ES 620 F G J K M DG DG DG ES ES ES ES 680 F G J K M DG DG DG ES ES ES ES 750 F G J K M DG DG DG ES ES ES ES 820 F G J K M DG DG DG ES ES ES ES 910 F G J K M DG DG DG ES ES ES ES 101 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 111 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 121 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 131 F G J K M CJ CJ CJ DG DG DG ES ES ES ES 151 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 161 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 181 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 201 F G J K M CJ CJ CJ DG DG DG ES ES ES EF 221 F G J K M CJ CJ CJ DG DG DG ES ES ES EU 241 F G J K M CJ CJ DG DG DG ES ES ES EU 271 F G J K M CJ CJ DG DG DG ES ES ES EU 301 F G J K M CJ CJ DG DG DC ES ES EF EU 331 F G J K M CJ CJ DG DG DC ES ES EF EU 361 F G J K M CJ CJ DG DG DC ES ES EF EU 391 F G J K M CJ CJ DG DG DC ES ES EF EU 431 F G J K M CJ CJ DG DG DD ES ES EF EU 471 F G J K M CJ CJ DG DG DD ES ES EU EU 511 F G J K M CJ CJ DG DG DD ES ES EU EU 561 F G J K M CJ CJ DG DG DG ES ES EU EU 621 F G J K M CJ CJ DG DG DG ES ES EU 681 F G J K M CJ CJ DG DG DG ES ES EU 751 F G J K M DG DG DG ES EF EU 821 F G J K M DG DG DG ES EF EU 911 F G J K M DC DC ES EF EU 102 F G J K M DC DC ES EF EU 112 F G J K M DC DC EF EU ED 122 F G J K M DC DC EF EU ED 630 Capacitance G Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions Capacitance Tolerance 1.0 - 9.1 pF* 10 pF 11 pF 12 pF 13 pF 15 pF 16 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 43 pF 47 pF 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF 110 pF 120 pF 130 pF 150 pF 160 pF 180 pF 200 pF 220 pF 240 pF 270 pF 300 pF 330 pF 360 pF 390 pF 430 pF 470 pF 510 pF 560 pF 620 pF 680 pF 750 pF 820 pF 910 pF 1,000 pF 1,100 pF 1,200 pF F C2220X 1,000 D 500 B C1812X 500 C 1,500 D C1210X 2,000 B 1,000 C 500 D 630 B C1206X 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805X 630 Case Size/Series C0603X B D F G C1206X C1210X © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1812X C2220X C1112_X8G_HV_HT_SMD • 3/2/2022 12 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 1D – Automotive Flexible Termination Capacitance Range/Selection Waterfall (0603 – 2220 Case Sizes) cont. Case Size/Series C0603X C0805X C1206X 1,500 2,000 JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JK JK JL JL JL JN JE JE JK JL JN JK JK JK JK JE JE JE JE JE JK JK JK JK JL JL JN JN JN JE JE JE JE JK JK JL JL JL JN JN JN F G C B D F G C B D F G C1210X © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com 1,500 JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JE JK JL JL JN JN JE JE JE JL JL JN 1,500 D 2,000 GH GO JE GK GO JE GK JE GM JE GM JE GO JE GO JK GO JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JL JN JE JE JL JL JN 1,000 GB GB GD GD GH GH GK GK GK GK GM GM GO GO GO GO GH GH GK GK GM GM GO GO 500 GB GB GD GD GH GH GH GH GH GH GH GH GH GH GK GK GK GM GM GO GO GO GH GH GH GH GK GM GO GO 630 GB GB GB GB GB GB GB GB GB GB GB GB GH GH GH GH GH GH GH GK GM GM GO GO GH GH GK GM GO GO 2,000 B G 1,000 C F 1,000 G D 500 F B 630 D FS FS FS FS FS FS FS FS FF FG FG FL FL FM FM FM FY FY FS FS FS FS C 500 B FS FS FS FS FL FL FL FL FL FM FM FY FY FY FS FS FE FE FF FF FF FG FG FM FM FY FS FS G 630 C FM FK FK FK FK FK FS FS FS FS FL FL FM FM FY FY FY FY FS FS FF FG FG FM FM FY FS FS F 1,500 D 2,000 B 1,000 1,500 2,000 C 500 G 630 F 1,500 D ED ED ED EF EF EF EU EU 630 B EU EU EU EU EQ EQ EQ EQ EQ EQ ER ER ES ES EE EF EF EU EU EU EU EU 1,000 C EF EF EF EF EU EU EU EU EQ EQ ER ER ES ES EE EF EF EU EU EU EU EU 500 D D 1,500 B B 2,000 C C C2220X 2,000 630 DC DD DD DG DG DG DG DG 630 Voltage Code DC DD DD DG DG DG DG DG 1,000 Rated Voltage (VDC) M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 630 K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K 1,000 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 500 Cap Code G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 1,000 Capacitance F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 500 132 152 162 182 202 222 242 272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 123 153 183 223 273 333 393 473 683 823 104 630 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF 5,200 pF 6,200pF 6,800pF 7,500pF 8,200 pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 68,000 pF 82,000 pF 0.1 µF G C1812X Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions 500 Capacitance Tolerance F 630 D 1,000 B 500 C 1,500 D C1210X 2,000 B 1,000 C 500 D 630 B C1206X 1,000 Rated Voltage (VDC) C 500 Voltage Code 1,000 Cap Code 500 Capacitance C0805X 630 Case Size/Series C0603X C1812X C2220X C1112_X8G_HV_HT_SMD • 3/2/2022 13 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Performance and Reliability: Test Methods and Conditions Test Reference Test Condition Limits Visual and Mechanical KEMET Internal No defects that may affect performance (10X) Dimensions according KEMET Spec Sheet KEMET Internal C ≤ 1,000 pF Frequency: 1 MHz ±100 kHz Voltage*:1.0 Vrms ±0.2 V C > 1,000 pF Frequency: 1 kHz ±50 Hz Voltage: 1.0 Vrms ±0.2 V * See part number specification sheet for voltage Within Tolerance KEMET Internal C ≤ 1,000 pF Frequency: 1 MHz ±100 kHz Voltage*:1.0 Vrms ±0.2 V C > 1,000 pF Frequency: 1 kHz ±50 Hz Voltage: 1.0 Vrms ±0.2 V * See part number specification sheet for voltage Within Specification Dissipation factor (DF) maximum limit at 25°C = 0.1% Capacitance (Cap) Dissipation Factor (DF) Within Specification Insulation Resistance (IR) KEMET Internal 500 VDC applied for 120 ±5 seconds at 25°C To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. 1,000 megaohm microfarads or 100 GΩ. Capacitance change with reference to +25°C and 0 VDC applied. * See part number specification sheet for voltage Temperature Coefficient of Capacitance (TCC) Within Specifcation ±30 ppm/°C KEMET Internal Step Temperature (°C) 1 +25°C 2 −55°C 3 +25°C (Reference) 4 +150°C Dielectric Withstanding Voltage (DWV) KEMET Internal See Dielectric Withstanding Voltage (DWV) Table (5 ±1 seconds and charge/discharge not exceeding 50 mA) Aging Rate (Maximum % Capacitance Loss/Decade Hour) KEMET Internal Maximum % capacitance loss/decade hour *Except 1812 ≥ 6.2 nF and 2220 ≥ 15 nF ±30 ppm/°C from −55°C to +125°C ±60 ppm/°C from +125°C to +150°C Cap: Initial Limit DF: Initial Limit IR: Initial Limit Withstand test voltage without insulation breakdown or damage. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com 0% Loss/Decade Hour C1112_X8G_HV_HT_SMD • 3/2/2022 14 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Performance and Reliability: Test Methods and Conditions cont. Test Reference Test Condition Limits Shear stress test per specific case size, Time: 60±1 seconds Terminal Strength KEMET Internal Case Size Force 0402 3N 0603 5N 0805 9N ≥1206 18N 3.0 mm minimum Test time: 60± 5 seconds Ramp time: 1 mm/second No evidence of mechanical damage Board Flex AEC-Q200-005 Solderability J-STD-002 Condition: 4 hours ± 15 minimum at 155°C dry bake apply all methods Test 245 ± 5°C (SnPb & Pb-Free) Visual Inspection. 95% coverage on termination. No leaching. JESD22 Method JA-104 1,000 cycles (−55°C to +150°C) 2 – 3 cycles per hour Soak Time 1 or 5 minutes Measurement at 24 hours ±4 hours after test conclusion. Cap: Initial Limit DF: Initial Limit IR: Initial Limit Temperature Cycling Biased Humidity MIL-STD-202 Method 103 Load Humidity: 1,000 hours 85°C/85% RH and 200 VDC maximum. Low Volt Humidity: 1,000 hours 85°C/85% RH and 1.5 V. No evidence of mechanical damage Measurement at 24 hours ±4 hours after test conclusion. Within Post Environmental Limits Cap: ±0.3% or ±0.25 pF shift IR: 10% of Initial Limit DF Limits Maximum: 0.5% Moisture Resistance MIL-STD-202 Method 106 Number of cycles required 10, 24 hours per cycle. Steps 7a and 7b not required Measurement at 24 hours ±4 hours after test conclusion. Within Post Environmental Limits Cap: ±0.3% or ±0.25 pF shift IR: 10% of Initial Limit DF Limits Maximum: 0.5% Thermal Shock MIL-STD-202 Method 107 Number of cycles required 5, (−55°C to 150°C) Dwell time 15 minutes. Cap: Initial Limit DF: Initial Limit IR: Initial Limit High Temperature Life Storage Life 1,000 hours at 150°C with 1.2 X rated voltage applied MIL-STD-202 Method 108 1,000 hours at 150°C, Unpowered © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com Within Post Environmental Limits Cap: ±0.3% or ±0.25 pF shift IR: 10% of Initial Limit DF: 0.5% C1112_X8G_HV_HT_SMD • 3/2/2022 15 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Performance and Reliability: Test Methods and Conditions cont. Test Reference Test Condition Limits Vibration MIL-STD-202 Method 204 5 g's for 20 minutes, 12 cycles each of 3 orientations. Test from 10 – 2,000 Hz Cap: Initial Limit DF: Initial Limit IR: Initial Limit Mechanical Shock MIL-STD-202 Method 213 1,500 g’s 0.5 ms Half-sine, Velocity Change 15.4 feet/second (Condition F) Resistance to Solvents MIL-STD-202 Method 215 Add Aqueous wash chemical OKEMCLEAN (A 6% concentrated Oakite cleaner) or equivalent. Do not use banned solvents. Cap: Initial Limit DF: Initial Limit IR: Initial Limit Visual Inspection 10X Readable marking, no decoloration or stains. No physical damage. Table 2A – Standard Termination Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel CG DN DP DG EB EC ED EE EF EG EH FE FF FG FL FM FY FK FS GB GD GH GK GM GO JE JK JL JN 0603 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1812 1812 1812 1812 1812 1812 2220 2220 2220 2220 0.80 ± 0.10 0.78 ± 0.10 0.90 ± 0.10 1.25 ± 0.15 0.78 ± 0.10 0.90 ± 0.10 1.00 ± 0.10 1.10 ± 0.10 1.20 ± 0.15 1.60 ± 0.15 1.60 ± 0.20 1.00 ± 0.10 1.10 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 1.70 ± 0.20 2.00 ± 0.20 2.10 ± 0.20 2.50 ± 0.30 1.00 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 4000 4000 4000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15000 15000 15000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2,500 4,000 4,000 2,500 2,500 2,500 2,000 2,000 2,500 2,500 2,500 2,000 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 500 500 0 0 0 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 10,000 10,000 10,000 8,000 8,000 8,000 8,000 4,000 4,000 4,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity 1 Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 16 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 2B – Flexible Termination Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel CJ DC DD DG EQ ER ED ES EE EF EU FZ FM FE FF FG FL FY FK FS GB GD GH GK GM GO JE JK JL JN 0603 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1210 1812 1812 1812 1812 1812 1812 2220 2220 2220 2220 0.80 ± 0.15 0.78 ± 0.10 0.90 ± 0.10 1.25 ± 0.15 0.78 ± 0.20 0.90 ± 0.20 1.00 ± 0.10 1.00 ± 0.20 1.10 ± 0.10 1.20 ± 0.15 1.60 ± 0.25 1.25 ± 0.20 1.70 ± 0.20 1.00 ± 0.10 1.10 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 2.00 ± 0.20 2.10 ± 0.20 2.50 ± 0.30 1.00 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 4000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4,000 4,000 2,500 4,000 4,000 2,500 2,500 2,500 2,500 2,000 2,500 2,000 2,500 2,500 2,500 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 500 500 0 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 8,000 10,000 8,000 10,000 10,000 10,000 8,000 8,000 8,000 4,000 4,000 4,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity1 Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 17 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 2C – Automotive Standard Termination Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel CG DN DP DG EB EC ED EE EF EG EH FE FF FG FL FM FY FK FS GB GD GH GK GM GO JE JK JL JN HG HJ HK JE JK JL JN KE KF KH KJ TA TB TC QB QC QD MA MB MC SA SB SC 0603 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1812 1812 1812 1812 1812 1812 2220 2220 2220 2220 1825 1825 1825 2220 2220 2220 2220 2225 2225 2225 2225 2824 2824 2824 3040 3040 3040 3640 3640 3640 4540 4540 4540 0.80 ± 0.10 0.78 ± 0.10 0.90 ± 0.10 1.25 ± 0.15 0.78 ± 0.10 0.90 ± 0.10 1.00 ± 0.10 1.10 ± 0.10 1.20 ± 0.15 1.60 ± 0.15 1.60 ± 0.20 1.00 ± 0.10 1.10 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 1.70 ± 0.20 2.00 ± 0.20 2.10 ± 0.20 2.50 ± 0.30 1.00 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 2.00 ± 0.20 2.50 ± 0.20 4000 4000 4000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15000 15000 15000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2,500 4,000 4,000 2,500 2,500 2,500 2,000 2,000 2,500 2,500 2,500 2,000 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 500 500 1,000 500 500 1,000 1,000 500 500 1,000 1,000 500 500 750 300 300 500 500 350 250 250 250 200 200 200 0 0 0 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 10,000 10,000 10,000 8,000 8,000 8,000 8,000 4,000 4,000 4,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity1 Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 18 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 2D – Automotive Flexible Termination Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel CJ DC DD DG EQ ER ED ES EE EF EU FZ FM FE FF FG FL FY FK FS GB GD GH GK GM GO JE JK JL JN 0603 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1210 1812 1812 1812 1812 1812 1812 2220 2220 2220 2220 0.80 ± 0.15 0.78 ± 0.10 0.90 ± 0.10 1.25 ± 0.15 0.78 ± 0.20 0.90 ± 0.20 1.00 ± 0.10 1.00 ± 0.20 1.10 ± 0.10 1.20 ± 0.15 1.60 ± 0.25 1.25 ± 0.20 1.70 ± 0.20 1.00 ± 0.10 1.10 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 2.00 ± 0.20 2.10 ± 0.20 2.50 ± 0.30 1.00 ± 0.10 1.25 ± 0.15 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 1.40 ± 0.15 1.60 ± 0.20 2.00 ± 0.20 2.50 ± 0.20 4000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4,000 4,000 2,500 4,000 4,000 2,500 2,500 2,500 2,500 2,000 2,500 2,000 2,500 2,500 2,500 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 500 500 0 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 8,000 10,000 8,000 10,000 10,000 10,000 8,000 8,000 8,000 4,000 4,000 4,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity1 Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 19 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 2E – Bulk Packaging Quantities Loose Packaging Packaging Type Bulk Bag (default) Packaging C-Spec1 N/A 2 Case Size Packaging Quantities (pieces/unit packaging) EIA (in) Metric (mm) 0402 0603 0805 1206 1210 1808 1005 1608 2012 3216 3225 4520 1812 1825 2220 2225 4532 4564 5650 5664 Minimum Maximum 50,000 1 20,000 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details. Commercial Grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk bag packaging option for Automotive Grade products. 2 A packaging C-Spec (see note 1 above) is not required for "Bulk Bag" packaging (excluding Anti-Static Bulk Bag and Automotive Grade products). The 15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 20 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 3 – Standard Termination Chip Capacitor Land Pattern Design Recommendations per IPC–7351 EIA Size Code Metric Size Code 0402 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.40 0.52 0.52 1.60 0.80 0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70 1206 3216 1.60 1.35 1.90 5.60 2.90 1.50 1.15 1.80 4.70 2.30 1.40 0.95 1.70 4.00 2.00 1210 3225 1.60 1.35 2.80 5.65 3.80 1.50 1.15 2.70 4.70 3.20 1.40 0.95 2.60 4.00 2.90 1210 1 3225 1.50 1.60 2.90 5.60 3.90 1.40 1.40 2.80 4.70 3.30 1.30 1.20 2.70 4.00 3.00 1812 4532 2.15 1.60 3.60 6.90 4.60 2.05 1.40 3.50 6.00 4.00 1.95 1.20 3.40 5.30 3.70 2220 5650 2.75 1.70 5.50 8.20 6.50 2.65 1.50 5.40 7.30 5.90 2.55 1.30 5.30 6.60 5.60 Only for capacitance values ≥ 22 µF. Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351). 1 Image below based on Density Level B for an EIA 1210 case size. V1 Y Y X X C C V2 Grid Placement Courtyard © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 21 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Table 4 – Flexible Termination Chip Capacitor Land Pattern Design Recommendations per IPC–7351 (mm) EIA Size Code Metric Size Code 0603 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 1608 0.85 1.25 1.10 4.00 2.10 0.75 1.05 1.00 3.10 1.50 0.65 0.85 0.90 2.40 1.20 0805 2012 0.99 1.44 1.66 4.47 2.71 0.89 1.24 1.56 3.57 2.11 0.79 1.04 1.46 2.42 1.81 1206 3216 1.59 1.62 2.06 5.85 3.06 1.49 1.42 1.96 4.95 2.46 1.39 1.22 1.86 4.25 2.16 1210 3225 1.59 1.62 3.01 5.90 4.01 1.49 1.42 2.91 4.95 3.41 1.39 1.22 2.81 4.25 3.11 1808 4520 2.30 1.75 2.30 7.40 3.30 2.20 1.55 2.20 6.50 2.70 2.10 1.35 2.10 5.80 2.40 1812 4532 2.10 1.80 3.60 7.00 4.60 2.00 1.60 3.50 6.10 4.00 1.90 1.40 3.40 5.40 3.70 2220 5650 2.85 2.10 5.50 8.80 6.50 2.75 1.90 5.40 7.90 5.90 2.65 1.70 5.30 7.20 5.60 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805, and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351). Image below based on Density Level B for an EIA 1210 case size. V1 Y Y X C V2 X C Grid Placement Courtyard © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 22 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Soldering Process Recommended Soldering Technique: • Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 • All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering Profile: KEMET’s families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET’s recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/JSTD-020 standard for moisture sensitivity testing. These devices can safely withstand a maximum of three reflow passes at these conditions. Termination Finish SnPb TP 100% Matte Sn Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (tS) from TSmin to TSmax 100°C 150°C 60 – 120 seconds 150°C 200°C 60 – 120 seconds Ramp-Up Rate (TL to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 60 – 150 seconds Peak Temperature (TP) 235°C 260°C Time Within 5°C of Maximum Peak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-Down Rate (TP to TL) 6°C/second maximum 6°C/second maximum TL Temperature Profile Feature tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time 6 minutes 8 minutes Time 25°C to Peak Temperature maximum maximum Note 1: All temperatures refer to the center of the package, measured on the capacitor body surface that is facing up during assembly reflow. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 23 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Storage and Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. Construction Standard Termination Detailed Cross Section Barrier Layer (Ni) Termination Finish (100% matte Sn) Dielectric Material (CaZrO3) Dielectric Material (CaZrO3) End Termination/ External Electrode (Cu) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Barrier Layer (Ni) Termination Finish (100% matte Sn) Inner Electrodes (Ni) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 24 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Construction cont. Flex Termination Detailed Cross Section Dielectric Material (CaZrO3) End Termination/ Barrier Layer External Electrode (Ni) (Cu) Termination Finish Epoxy Layer (100% Matte (Ag) Sn/SnPb–5% Pb min) Dielectric Material (CaZrO3) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Epoxy Layer (Ag) Barrier Layer (Ni) Inner Electrodes (Ni) Termination Finish (100% Matte Sn/SnPb–5% Pb min) Capacitor Marking (Optional) Laser marking option is not available on: • C0G, U2J, X8G, X8R and Y5V dielectric devices. • EIA 0402 case size devices. • EIA 0603 case size devices with Flexible Termination option. • KPS Commercial and Automotive grade stacked devices. These capacitors are supplied unmarked only. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 25 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips. Bar code label Anti-static reel ® Embossed plastic* or punched paper carrier. ET KEM Chip and KPS orientation in pocket (except 1825 commercial, and 1825 and 2225 Military) Sprocket holes Embossment or punched cavity 8 mm, 12 mm or 16 mm carrier tape 180 mm (7.00") or 330 mm (13.00") Anti-static cover tape (0.10 mm (0.004") maximum thickness) *EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. Table 5 – Carrier Tape Configuration, Embossed Plastic & Punched Paper (mm) EIA Case Size Tape Size (W)* Embossed Plastic 7" Reel 13" Reel Pitch (P1)* Punched Paper 7" Reel 13" Reel Pitch (P1)* 01005 – 0402 8 2 2 0603 8 2/4 2/4 0805 8 4 4 4 4 1206 – 1210 8 4 4 4 4 1805 – 1808 12 4 4 ≥ 1812 12 8 8 KPS 1210 12 8 8 KPS 1812 and 2220 16 12 12 Array 0612 8 4 4 *Refer to Figures 1 and 2 for W and P1 carrier tape reference locations. *Refer to Tables 6 and 7 for tolerance specifications. New 2 mm Pitch Reel Options* Packaging Ordering Code (C-Spec) Packaging Type/Options C-3190 C-3191 C-7081 C-7082 Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked * 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development. Benefits of Changing from 4 mm to 2 mm Pitching Spacing • Lower placement costs. • Double the parts on each reel results in fewer reel changes and increased effi ciency. • Fewer reels result in lower packaging, shipping and storage costs, reducing waste. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 26 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 (10 pitches cumulative tolerance on tape ±0.2 mm) P0 A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity ØD1 Cover Tape B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 6 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) R Reference S1 Minimum T Note 2 Note 3 Maximum 25.0 (0.984) 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) 30 (1.181) E1 P0 P2 T1 Maximum 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm 16 mm B1 Maximum Note 4 4.35 Single (4 mm) (0.171) Single (4 mm) 8.2 and double (8 mm) (0.323) 12.1 Triple (12 mm) (0.476) Pitch E2 Minimum 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) F P1 3.5 ±0.05 4.0 ±0.10 (0.138 ±0.002) (0.157 ±0.004) 5.5 ±0.05 8.0 ±0.10 (0.217 ±0.002) (0.315 ±0.004) 7.5 ±0.05 12.0 ±0.10 (0.138 ±0.002) (0.157 ±0.004) T2 Maximum 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) W Maximum 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) A0,B0 & K0 Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of the embossment location and the hole location shall be applied independently of each other. 2. The tape with or without components shall pass around R without damage (see Figure 6.) 3. If S1 < 1.0 mm, there may not be enough area for a cover tape to be properly applied (see EIA Standard 481, paragraph 4.3, section b.) 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3.) (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4.) (e) for KPS product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see addendum in EIA Standard 481 for standards relating to more precise taping requirements. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 27 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Figure 2 – Punched (Paper) Carrier Tape Dimensions T Po ØDo (10 pitches cumulative tolerance on tape ±0.2 mm) A0 F P1 T1 T1 Top Cover Tape W E2 B0 Bottom Cover Tape E1 G Cavity Size, See Note 1, Table 7 Center Lines of Cavity Bottom Cover Tape User Direction of Unreeling Table 7 – Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 E1 P0 P2 T1 Maximum G Minimum 8 mm 1.5 +0.10 -0.0 (0.059 +0.004 -0.0) 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 0.10 (0.004) maximum R Reference Note 2 0.75 (0.030) 25 (0.984) Variable Dimensions — Millimeters (Inches) Tape Size Pitch 8 mm Half (2 mm) 8 mm Single (4 mm) E2 Minimum F P1 T Maximum W Maximum A0 B 0 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 2.0 ±0.05 (0.079 ±0.002) 4.0 ±0.10 (0.157 ±0.004) 1.1 (0.098) 8.3 (0.327) 8.3 (0.327) Note 1 1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20° maximum (see Figure 3.) d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4.) e) see addendum in EIA Standard 481 for standards relating to more precise taping requirements. 2. The tape with or without components shall pass around R without damage (see Figure 6.) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 28 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 3 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16 – 200 10 Bo ° T) Typical Component Centerline Ao Figure 4 – Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum ° s Tape Width (mm) 8,12 16 – 56 72 – 200 Maximum Rotation ( 20 10 5 Figure 5 – Bending Radius Embossed Carrier 16 mm Tape ° S) Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com R C1112_X8G_HV_HT_SMD • 3/2/2022 29 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Figure 6 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 8 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 16.4 +2.0/−0.0 (0.646 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 30 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) Figure 7 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum leader 400 mm minimum Top Cover Tape Figure 8 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 31 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage, High Temperature 150°C, X8G Dielectric, 500 – 2,000 VDC (Commercial & Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1112_X8G_HV_HT_SMD • 3/2/2022 32