C0805C824K3RACAUTO
SMD Auto X7R, Ceramic, 0.82 uF, 10%, 25 VDC, X7R, SMD, MLCC,
Temperature Stable, Automotive Grade, 0805
General Information
Click here for the 3D model.
Dimensions
Chip Size
0805
L
2mm +/-0.2mm
W
1.25mm +/-0.2mm
T
1.25mm +/-0.15mm
S
0.75mm MIN
B
0.5mm +/-0.25mm
Packaging Specifications
T&R, 180mm, Plastic Tape
Packaging Quantity
2500
Series
SMD Auto X7R
Style
SMD Chip
Description
SMD, MLCC, Temperature Stable, Automotive
Grade
Features
Temperature Stable, Automotive Grade
RoHS
Yes
Termination
Tin
Marking
No
Qualifications
AEC-Q200
AEC-Q200
Yes
Component
Weight
21 mg
Shelf Life
78 Weeks
MSL
1
Specifications
Packaging
Capacitance
0.82 uF
Measurement Condition
1 kHz 1.0Vrms
Capacitance Tolerance
10%
Voltage DC
25 VDC
Dielectric Withstanding Voltage
62.5 VDC
Temperature Range
-55/+125°C
Temperature Coefficient
X7R
Capacitance Change with Reference
to +25°C and 0 VDC Applied (TCC)
15%, 1kHz 1.0Vrms
Dissipation Factor
3.5% 1 kHz 1.0Vrms
Aging Rate
3% Loss/Decade Hour:
Referee Time is 1000 Hours
Insulation Resistance
609.8 MOhms
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any
warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the
correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no
obligation or liability for the advice given or results obtained.
Generated 8/29/2023 - 373c649a-46cd-447a-9ee6-41df2839c8e3
© 2006 - 2023 KEMET
C0805C824K3RACAUTO
SMD Auto X7R, Ceramic, 0.82 uF, 10%, 25 VDC, X7R, SMD, MLCC,
Temperature Stable, Automotive Grade, 0805
Simulations
For the complete simulation environment please visit K-SIM.
Generated 8/29/2023 - 373c649a-46cd-447a-9ee6-41df2839c8e3
© 2006 - 2023 KEMET
C0805C824K3RACAUTO
SMD Auto X7R, Ceramic, 0.82 uF, 10%, 25 VDC, X7R, SMD, MLCC,
Temperature Stable, Automotive Grade, 0805
Generated 8/29/2023 - 373c649a-46cd-447a-9ee6-41df2839c8e3
© 2006 - 2023 KEMET
C0805C824K3RACAUTO
SMD Auto X7R, Ceramic, 0.82 uF, 10%, 25 VDC, X7R, SMD, MLCC,
Temperature Stable, Automotive Grade, 0805
These are simulations.
This is not a specification!
The responses shown represent the typical response for each part type. Specific responses may vary, depending on manufacturing variation affects of all parameters involved, including the specified
tolerances applied to capacitance and unspecified variations of ESR, ESL, and leakage resistance.
The responses shown do not represent a specified or implied maximum capability of the device for all applications.
•
The ESR used for ripple “Ripple Current/Voltage vs. Frequency” plots is the ESR at ambient temperature.
•
The ESR in the “Temperature Rise vs. Ripple Current” plots is adjusted to each incremental temperature rise before the power and ripple current is calculated.
•
The effects shown herein are based on measured data from a multiple part sample of the parts in question.
•
Ripple capability of this device will be factored by thermal resistance (Rth) created by circuit traces (addi affects of all parameters involved, including the specified tolerances applied to
capacitance and unspecified variations of ESR, ESL, and leakage resistance.
The peak voltages generated in the “Temperature Rise vs. Combined Ripple Currents” plot are calculated for each frequency and are not combined with voltages generated at any other
harmonics.
Please consult with the catalog or field applications engineer for maximum capability of the device in specific applications.
•
•
All product information and data (collectively, the “Information”) are subject to change without notice.
KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. The responses shown represent the typical response for each part
type. Specific responses may vary, depending on manufacturing variation effects of all parameters involved, including the specified tolerances applied to capacitance and unspecified variations of ESR,
ESL, and leakage resistance.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain
applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a
specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application.
Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or
results obtained.
If you have any questions please contact K-SIM.
Generated 8/29/2023 - 373c649a-46cd-447a-9ee6-41df2839c8e3
© 2006 - 2023 KEMET
