C1206C103P3UAC

KEMET ® CERAMIC CHIP/STANDARD FEATURES • C0G (NP0), X7R, Z5U and Y5V Dielectrics • 10, 16, 25, 50, 100 and 200 Volts • Standard End Metalization: Tin-plate over nickel barrier • Available Capacitance Tolerances: ±0.10 pF; ±0.25 pF; ±0.5 pF; ±1%; ±2%; ±5%; ±10%; ±20%; and +80%-20% • Tape and reel packaging per EIA481-1. (See page 51 for specific tape and reel information.) Bulk Cassette packaging (0402, 0603, 0805 only) per IEC60286-6 and EIAJ 7201. CAPACITOR OUTLINE DRAWINGS W T S ELECTRODES L B TIN PLATE NICKEL PLATE CONDUCTIVE METALLIZATION DIMENSIONS—MILLIMETERS AND (INCHES) EIA SIZE CODE 0402* 0603* 0805* 1206* 1210* 1812 1825* 2220 2225 METRIC SIZE CODE (Ref only) 1005 1608 2012 3216 3225 4532 4564 5650 5664 L# LENGTH 1.0 (.04) ± .05(.002) 1.6 (.063) ± 0.15 (.006) 2.0 (.079) ± 0.2 (.008) 3.2 (.126) ± 0.2 (.008) 3.2 (.126) ± 0.2 (.008) 4.5 (.177) ± 0.3 (.012) 4.5 (.177) ± 0.3 (.012) 5.6 (.220) ± 0.4 (.016) 5.6 (.220) ± 0.4 (.016) W# WIDTH 0.5 (.02) ± .05 (.002) 0.8 (.032) ± 0.15 (.006) 1.25 (.049) ± 0.2 (.008) 1.6 (.063) ± 0.2 (.008) 2.5 (.098) ± 0.2 (.008) 3.2 (.126) ± 0.3 (.012) 6.4 (.252) ± 0.4 (.016) 5.0 (.197) ± 0.4 (.016) 6.3 (.248) ± 0.4 (.016) T (EIA) # THICKNESS MAX. 0.55 (.022) 0.9 (.035) 1.3 (.051) 1.5 (.059) 1.7 (.067) 1.7 (.067) 1.7 (.067) 1.8 (.071) 2.0 (.079) B BANDWIDTH 0.20 (0.008)-0.40 (0.016) 0.35 (.014) ±0.15 (.006) 0.5 (.02) ±.25 (.010) 0.5 (.02) ±.25 (.010) 0.5 (.02) ±.25 (.010) 0.6 (.024) ±.35 (.014) 0.6 (.024) ±.35 (.014) 0.6 (.024) ±.35 (.014) 0.6 (.024) ±.35 (.014) S MIN. SEPARATION 0.3 (.012) 0.7 (.028) 0.75 (.030) N/A N/A N/A N/A N/A N/A MOUNTING TECHNIQUE Solder Reflow Solder Wave or Solder Reflow Solder Reflow * Note: Indicates EIA Preferred Case Sizes # Note: Different tolerances apply for 0402, 0603, and 0805 packaged in bulk cassette. CAPACITOR ORDERING INFORMATION (Standard Chips - For C 0805 C 103 K 5 R A C* CERAMIC SIZE CODE SPECIFICATION C - Standard CAPACITANCE CODE Expressed in Picofarads (pF) First two digits represent significant figures. Third digit specifies number of zeros. (Use 9 for 1.0 thru 9.9pF. Use 8 for 0.5 through 0.99pF) (Example: 2.2pF = 229 or 0.50 pF = 508) CAPACITANCE TOLERANCE B – ±0.10pF J – ±5% C – ±0.25pF K – ±10% D – ±0.5pF M – ±20% F – ±1% P – (GMV) G – ±2% Z – +80%, -20% * Part Number Example: C0805C103K5RAC Military see page 45) END METALLIZATION C-Standard (Tin-plated nickel barrier) FAILURE RATE LEVEL A- Not Applicable TEMPERATURE CHARACTERISTIC Designated by Capacitance Change Over Temperature Range G – C0G (NP0) (±30 PPM/°C) R – X7R (±15%) U – Z5U (+22%, -56%) V – Y5V (+22%, -82%) VOLTAGE 1 - 100V 3 - 25V 2 - 200V 4 - 16V 5 - 50V 8 - 10V (14 digits - no spaces) 38 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP/STANDARD KEMET ® Z5U CAPACITANCE RANGE (KEMET's Z5U also meets Y5V Characteristics) CAP. PF 6800.0 8200.0 10,000.0 12,000.0 15,000.0 18,000.0 22,000.0 27,000.0 33,000.0 39,000.0 47,000.0 56,000.0 68,000.0 82,000.0 100,000.0 120,000.0 150,000.0 180,000.0 220,000.0 270,000.0 330,000.0 390,000.0 470,000.0 560,000.0 680,000.0 820,000.0 1,000,000.0 1,200,000.0 1,500,000.0 1,800,000.0 2,200,000.0 CAP TOL M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z C0805* 50V 100V 682 682 822 822 103 103 123 153 183 223 273 333 393 473 563 683 823 104 C1206* C1210* C1812* C1825* C2225 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 473 563 683 823 823 104 124 154 184 224 274 334 394 474 564 684 824 105 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 184 224 274 334 394 NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. 50 Volt Ceramic Chips can be used for 63 volt applications. * EIA preferred chip sizes KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 41 Ceramic Surface Mount 334 334 394 394 474 474 564 684 824 105 125 155 185 225