C1210C10613PAC

Product Bulletin Surface Mount Ceramic Chip Capacitors New Extended Values in X5R Dielectric KEMET is pleased to continue the expansion of high capacitance ratings in our X5R ceramic chip capacitors to include the following values in our base metal electrode devices. X5R/1210 - 6.8µF – 10.0µF (685 - 106) @ 25 Volts Outline Drawing Table 1 Dimensions - Millimeters (Inches) Metric EIA Size Size Code Code 3225 1210 L - Length 3.2 (.126) ± 0.2 (.008) W - Width 2.5 (.098) ± 0.2 (.008) Max. T - Thickness See Table 2 B - Bandwidth 0.5 (.02) ± .25 (.010) Separation N/A Table 2 - X5R - Capacitance Value Extensions Capacitance (µF) 6.8 8.2 10.0 KEMET Part Number C1210C685(1)3PAC C1210C825(1)3PAC C1210C106(1)3PAC Voltage 25 25 25 Cap Tol K,M K,M K,M Thickness Qty T (mm) 7” Reel 1.85 ± .20 2,000 2.10 ± .20 2,000 2.10 ± .20 2,000 Qty 13” Reel 8,000 8,000 8,000 (1) To complete KEMET part number, insert the alpha code for the tolerance desired. K = ±10%; M = ±20% F-3261A 08/04 Electrical Parameters As detailed in the KEMET Surface Mount Catalog F3102 for X5R, with following specific requirements based on room temperature (25°C) parameters: • Operating Range: -55°C to +85°C, with no-bias capacitance shift limited to ± 15% over that range • Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000 megohm microfarads or 100 gigohms, whichever is less. • Capacitance and Dissipation Factor (DF) measured at 1KHz at 1Vrms. DF Limit is 5%. Soldering Process The 1210 part is suitable for reflow soldering only. All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. Marking These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option. More detail on the marking format is included in our Surface Mount Catalog F3102. In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com