F-3113 5/06
CERAMIC HIGH VOLTAGE,
HIGH TEMPERATURE CAPACITORS
Ceramic High Voltage, High
Temperature Capacitors
KEMET Series
Performance Information
Page
1-4
HT/HP
5-7
High Temperature, High Voltage
Radial
HV
8-9
High Voltage Conformally Coated
Radial
HV
10-14
High Voltage MIL-PRF-49467 (Equivalent)
HV
15-17
High Voltage Space Quality
HS
18-22
High Voltage Ceramic Chip
1515/1812/1825/2020/
2225/2520/3333//3530
4040/4540/5440/5550/6560
23-27
SM20/SM21/SM22/SM23
SM24/SM25/SM26/SM30/
SM31/SM33/SM34/SM35/SM36
28-32
D30/40/50/75/90/100/120
33-34
High Voltage Disc Multiplie Stacks D30/40/50/75/90/100/120
35
High Voltage L & J Leaded
High Voltage Disc
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
CERAMIC HIGH VOLTS
& TEMPERATURE
High Temperature, High Voltage
Axial/Radial
HIGH TEMPERATURE, HIGH VOLTAGE
PERFORMANCE CHARACTERISTICS
GENERAL SPECIFICATIONS
ENVIRONMENTAL
Working Voltage:
C0G
50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k,
15k, 20k
X7R
50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k, 15k,
20k, 30k, 40k, 50k
X5U
3k, 4k, 5k, 7.5k, 10k, 15k, 20k
Temperature Characteristics:
C0G
0 + 30 PPM / °C from - 55°C to + 125°C (1)
X7R
+ 15% from - 55°C to + 125°C
X5U
+ 22%, -56% from -55°C to + 85°C
Capacitance Tolerance:
C0G
+0.5pF, +1%, +2%, +5%, +10%
X7R
+10%, +20%, +80% / -20%, +100% / -0%
X5U
+10%, +20%, +80% / -20%, +100% / -0%
Construction:
Epoxy encapsulated - meets flame test requirements
of UL Standard 94V-0.
High-temperature solder - meets EIA RS-198, Method 302,
Condition B (260°C for 10 seconds)
Termination Material:
Check individual Series: Part Number and Ordering Information
for Termination Materials offered in each series.
Solderability:
MIL-STD 202, Method 208
(Test Method: ANSI/J-STD-002)
Test A for through-hole mount and surface mount leaded.
Test B for surface mount leadless components.
Terminal Strength:
MIL-STD 202, Method 208, Condition A (2.3kg or 5 lbs)
Resistance to Solvents:
MIL-STD 202, Method 215
Resistance to Soldering Heat:
MIL-STD 202, Method 210, Test Condition C
Vibration:
MIL-STD 202, Method 204, Condition D (20g)
Shock:
MIL-STD 202, Method 213, Condition I (100g)
Life Test:
MIL-STD 202, Method 108
500V
C0G - rated voltage @ +125°C
X7R - rated voltage @ +125°C
X5U - rated voltage @ +85°C
Post Test Limits @ 25°C are:
Capacitance Change:
C0G (< 200V) - +3% or 0.25pF, whichever is greater.
C0G (> 500V) - +3% or 0.50pF, whichever is greater.
X7R - + 20% of initial value (2)
Dissipation Factor:
C0G - 0.25% maximum
X7R & X5U - 3.0% maximum
Insulation Resistance:
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
1kV test @ 500V.
ELECTRICAL
Capacitance @ 25°C:
Within specified tolerance and following test conditions per MILSTD 202, Method 305.
C0G, X7R & X5U
> 100pF with 1.0 vrms @ 1 kHz with 1.0 vrms
< 100pF with 1.0 vrms @ 1 MHz with 1.0 vrms
Dissipation Factor @ 25°C:
Same test conditions as capacitance.
C0G - 0.15% maximum
X7R - 2.5% maximum
X5U - 2.5% maximum
Insulation Resistance @25°C:
MIL-STD 202, Method 302
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
1kV test @ 500V.
Dielectric Withstanding Voltage:
MIL-STD 202, Method 301
1251V test @ 120% of rated voltage
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
1kV test @ 500V.
Moisture Resistance:
MIL-STD 202, Method 106
Post Test Limits @ 25°C are:
Capacitance Change:
C0G (< 200V) - +3% or 0.25pF, whichever is greater.
C0G (> 500V) - +3% or 0.50pF, whichever is greater.
X7R - + 20% of initial value (2)
Dissipation Factor:
C0G - 0.25% maximum
X7R & X5U - 3.0% maximum
Insulation Resistance:
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
1kV test @ 500V.
Thermal Shock:
MIL-STD 202, Method 107, Condition A
C0G & X7R: -55°C to 125°C
X5U: -55°C to 85°C
(1)
(2)
+53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM
below 10pF.
X7R & X5U dielectrics exhibit aging characteristics;
therefore, it is highly recommended that capacitors be
deaged for 2 hours at 150°C and stabilized at room temperature for 48 hours before capacitance measurements
are made.
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
KEMET HIGH VOLTAGE TECHNICAL SUMMARY
HIGH TEMPERATURE
HIGH VOLTAGE
Avionics
X
X
Radar Systems
X
X
MILITARY & AEROSPACE
X
Telemetry, Data Tx/Rx
Control Systems
X
MEDICAL
.5 to 1.5 Tesla MR1 &
X
NM1 Tuning Coils
X
1 to 3 Tesla MR1 Gradient
X
Coils & Magnetic Rings
X
CT-Scanner
X
X
Medical MRI
X-Ray Generator
X
X
SEMICONDUCTOR
X
RF Tuning Networks
X
RF Power Supplies
Semiconductor Manufacturing
X
SECURITY
Handheld Scanners
X
Intruder Detection Systems
X
Luggage Scanners
X
Metal/Explosive Detector
X
OTHER
X
LCD Backlight Inverter
Electric Ballast for CFL
X
X
Electric Ballast for Fluorescent Lamp
X
X
Measurement Equipment
X
X
Microwave/Convection Ovens
X
X
X
X
POWER SUPPLY
HV Power Supply
X
Power Station Equipment
X
Power Supply for Air Conditioner, Washing Machine
Inverter Power Supply-AC
X
TELECOM
Base Station Power amps
X
Broadcasting Equipment
X
MODEM
DAA Modem
X
xDSL Modem
X
LAN, Router, HUB, Switches
X
RF Power Amplifiers
X
INDUSTRIAL
Oil Rigging, Down Hole, Mining
X
X
2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
KEMET HIGH VOLTAGE TECHNICAL SUMMARY
ELECTRICAL
Voltage
Range
Capacitance
Range
ENVIRONMENTAL
Dissipation
Factor
Operating
Temperature Range
MECHANICAL
Configuration
CATALOG
See page(s)
for detail
HIGH VOLTAGE
5
Radial Conformally
Coated
C0G/X7R: 500 to
10k VDC
C0G:12 pF - .330µF
X7R: 220 pF - 5.6 µF
C0G: 0.15% max
X7R: 2.5% max
C0G: -55°C to + 125°C
X7R: -55°C to + 125°C
Radial
Mil-PRF-49467
Equivalent
C0G/X7R: 600 to 5k
VDC
C0G: 12 pF - .68 µF
X7R: 27 pF - .47 µF
C0G: 0.15% max
X7R: 2.5% max
C0G/X7R: -55°C to + 125°C
Radial
Space Quality
C0G/X7R: 500 to
10k VDC
C0G/X7R: 560 pF 2.20µF
C0G: 0.15% max
X7R: 2.5% max
C0G/X7R: -55°C to + 125°C
Radial
Std
6
7-10
Ceramic Surface Mount
Chip
11-13
Military
C0G/X7R:
500 to 5k VDC
C0G: 12 pF- .10 µF
X7R: 270 pF -2.50 µF
C0G: 0.15% max
X7R: 2.5% max
C0G/X7R: -55°C to + 125°C
Chip
Leaded Chips
J or L lead
C0G/X7R:
500 to 10k VDC
C0G: 12 pF-.330 µF
X7R: 220 pF-5.6 uF
C0G: 0.15% max
X7R: 2.5% max
C0G/X7R: -55°C to + 125°C
Leaded Chip
J or L Lead
Disc
C0G/X5U: 3k to
20k VDC,
X7R:3k to 50k VDC
C0G: 1.2 pF-236 pF
X7R: 10 p -7400 pF
X5U: 80 pF-17300 pF
C0G: 0.15% max
X7R: 2.5% max
X5U: 2.5% max
C0G/X7R: -55°C to + 125°C
X5U: -55°C to + 85°C
Disc
Disc Stack
C0G/X7R/X5U: 5k
to 20k VDC
C0G: 1.2 pF-141 pF
X7R: 37 pF-4400 pF
X5U: 80 pF-10400 pF
C0G: 0.15% max
X7R: 2.5% max
X5U: 2.5% max
C0G/X7R: -55°C to + 125°C
X5U: -55°C to + 85°C
Disc Stack
14-16
17-19
HIGH TEMPERATURE
20-21
22-23
Hi Temp (HT/HP)
100 to 200 VDC
C0G: 22 pF-.100 µF
X7R:1000 pF-1.0µF
C0G 0.15%
X7R Type 2.0%
X7R 2.50%
-55°C to + 200°C
Axial/Radial
Hi Temp Hi Volt (HV)
500 to 4000 VDC
C0G: 390 pF-.015 µF
X7R:1400 pF- .270 µF
C0G 0.15%
X7R Type 2.0%
X7R 2.50%
-55°C to + 200°C
Radial
2425
2627
Ceramic Cased Capacitor
Std 125°C
(SCR/SRR/SCA/SRA)
50 to 200 VDC
C0G: 1.0 pF- .12 µF
X7R:100 pF- 6.8 µF
C0G 0.15%
X7R 2.50%
-55°C to + 125°C
Axial/Radial
200°C
(ACR/ARR/ACA/ARA)
50 to 100 VDC
C0G: 1.0 pF- .12 µF
X7R:100 pF- 3.3 µF
C0G 0.15%
X7R 2.50%
-55°C to + 200°C
Axial/Radial
260°C
(TCR/TRR/TCA/TRA)
50 to 100 VDC
C0G: 1.0 pF- .12 µF
X7R:100 pF- 3.3 µF
C0G 0.15%
X7R 2.50%
-55°C to + 260°C
Axial/Radial
Hi Temp Hi Volt
(VCR/VRR)
500 to 5000 VDC
C0G: 10 pF-.056 µF
X7R:330 pF-1.2µF
C0G 0.15%
X7R 2.50%
-55°C to + 200°C
Radial
2831
3233
3435
3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
TECHNICAL SUMMARY
DIELECTRIC COMPARISONS
Features
Dielectric Type
Ultra Stable
Semi-Stable
High Voltage
Semi-Stable
Hi-Temp
Temp/Volt
Dependent
C0G (NPO)
X7R
X7R type
X5U
Temperature Coefficient
0 ±30ppm/ºC
±15%
+15/-40%
+22-56%
Operating Temp. Range
-55 to +200ºC
-55 to +125ºC
-55 to +200ºC
-55 to +125ºC
0.1% max.
2.5% max.
2.0% max.
2.5% max.
None
-2.0% max/dec. hour
-2.0% max/dec. hour
-2.0% max/dec. hour
25 to 20k VDC
50 to 50k VDC
25 to 4k VDC
Up to 20K VDC
Dissipation Factor
Aging Rate
Voltage Range
Standard Tolerance
Coefficient of Thermal
Expansion @ 25ºC
J, K, M
K, M, P, Z
K, M, P, Z
M, P, Z
9 X 10-6 IN/IN ºC
11 X 10-6 IN/IN ºC
11 X 10-6 IN/IN ºC
11 X 10-6 IN/IN ºC
TYPICAL INSULATION RESISTANCE VS. TEMP (C°)
FOR C0G, NPO & X7R DIELECTRICS
Ohm-Farads
10,000.00
1,000.00
100.00
10.00
25
75
125
175
225
275
325
TEMP (°C)
4
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH TEMPERATURE (+200ºC)
AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES
CAPACITOR OUTLINE DRAWING
FEATURES
L
The HT/HP Series is used in robust applications
W
1.25
Min.
• Down Hole
• Industrial
• Harsh Environments
H
Where a Radial/Axial coated capacitor can
withstand high temperatures (200°C).
L
1.25
Min.
D
NOTE:
Other tolerances, higher capacitance values, voltages,
or special package configurations are available upon
request.
S
DIMENSIONS
Molded (HT) and Conformal Coated (HP), Radial Lead Types
Style
HT05
HT55
HT06
HT08
HT09
Sizes in Inches (mm) max
Length (L)
Height (H)
Thickness (W)
.200 (5.08)
.200 (5.08)
.100 (2.54)
.200 (5.08)
.200 (5.08)
.100 (2.54)
.300 (7.62)
.300 (7.62)
.150 (3.81)
.500 (12.70)
.500 (12.70)
.250 (6.35)
.700 (17.78)
.400 (10.16)
.200 (5.08)
Tubular Case, Axial Lead Types
Lead Spacing
±0.030 (S)
.100 (2.54)
.200 (5.08)
.200 (5.08)
.400 (10.16)
.500 (12.70)
Style
HT11
HT13
HT14
HT15
HT16
Sizes in Inches (mm) max
Length (L)
Diameter (D)
.170 (4.32)
.100 (2.54)
.260 (6.60)
.135 (3.43)
.400 (10.16)
.155 (3.94)
.500 (12.70)
.200 (5.08)
.750 (19.05)
.375 (9.52)
PART NUMBER AND ORDERING INFORMATION
HT06 A
W 472
K
C
STYLE
OPTIONAL COPPER LEAD
HT=Molded
HP= Conformal Coated
Solder coated. Add to part
number only if required
VOLTAGE
A=25V
B=50V
C=100V
D=200V
TOLERANCE
DIELECTRIC
MATERIAL
CAPACITANCE VALUE
B, W=X7R type
N=C0G (NP0)
J=±5%
K=±10%
M=±20%
Other tolerance available upon request
MARKING
(HT05, HT55, HT11)
472K
KEC
(All other sizes)
HT06AW472K
KEC
Date Code
First two digits are significant, last digit is
number of zeros, i.e., 472=4700pF
For CONFORMAL COATED types, change style number to HPXX. HP dimensions will be reduced slightly.
5
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH TEMPERATURE (+200ºC)
AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES
COG & X7R DIELECTRIC
Radial
Series
C0G
Radial
Series
X7R
HT/HP05
HT/HP55
HT/HP06
HT/HP08
HT/HP09
HT/HP05
HT/HP55
HT/HP06
HT/HP08
HT/HP09
Wmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.700(17.78)
Wmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.700(17.78)
Hmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.400(10.16)
Hmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.400(10.16)
Tmax
.100(2.54)
.100(2.54)
.150(3.81)
.250(6.35)
.200(5.08)
Tmax
.100(2.54)
.100(2.54)
.150(3.81)
.250(6.35)
.200(5.08)
S +.030
.100(2.54)
.200(5.08)
.200(5.08)
.400(10.16)
500(12.70)
S +.030
.100(2.54)
.200(5.08)
.200(5.08)
.400(10.16)
500(12.70)
LeadDia.
.025(.635)
.025(.635)
.025(.635)
.025(.635)
.025(.635)
LeadDia.
.025(.635)
.025(.635)
.025(.635)
.025(.635)
.025(.635)
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
Cap
Cap
Code
Cap
Cap
Code
1.0pF
109
100pF
101
1.2
129
120
121
1.5
159
150
151
1.8
189
180
181
2.2
229
220
221
2.7
279
270
271
3.3
339
330
331
3.9
399
390
391
4.7
479
470
471
5.6
569
560
561
6.8
689
680
681
8.2
829
820
821
10
100
1000
102
12
120
1200
122
15
150
1500
152
18
180
1800
182
22
220
2200
222
27
270
2700
272
33
330
3300
332
39
390
3900
392
47
470
4700
472
56
560
5600
562
68
680
6800
682
82
820
8200
822
100
101
.010uF
103
120
121
.012
123
150
151
.015
153
180
181
.018
183
220
221
.022
223
270
271
.027
273
330
331
.033
333
390
391
.039
393
470
471
.047
473
560
561
.056
563
680
681
.068
683
820
821
.082
823
1000
102
.10
104
1200
122
.12
124
1500
152
.15
154
1800
182
.18
184
2200
222
.22
224
2700
272
.27
274
3300
332
.33
334
3900
392
.39
394
4700
472
.47
474
5600
562
.56
564
6800
682
.68
684
8200
822
.82
824
.010uF
103
1.0
105
.012
123
1.2
125
.015
153
1.5
155
.018
183
1.8
185
.022
223
2.2
225
.027
273
2.7
275
.033
333
3.3
335
.039
393
3.9
395
.047
473
4.7
475
.056
563
.068
683
.082
823
.10
104
.12
124
.15
154
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
6
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
50
100
200
HIGH TEMPERATURE (+200ºC)
AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES
COG & X7R DIELECTRIC
Radial
Series
C0G
Radial
Series
X7R
HT/HP05
HT/HP55
HT/HP06
HT/HP08
HT/HP09
HT/HP05
HT/HP55
HT/HP06
HT/HP08
HT/HP09
Wmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.700(17.78)
Wmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.700(17.78)
Hmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.400(10.16)
Hmax
.200(5.08)
.200(5.08)
.300(7.62)
.500(12.70)
.400(10.16)
Tmax
.100(2.54)
.100(2.54)
.150(3.81)
.250(6.35)
.200(5.08)
Tmax
.100(2.54)
.100(2.54)
.150(3.81)
.250(6.35)
.200(5.08)
S +.030
.100(2.54)
.200(5.08)
.200(5.08)
.400(10.16)
500(12.70)
S +.030
.100(2.54)
.200(5.08)
.200(5.08)
.400(10.16)
500(12.70)
LeadDia.
.025(.635)
.025(.635)
.025(.635)
.025(.635)
.025(.635)
LeadDia.
.025(.635)
.025(.635)
.025(.635)
.025(.635)
.025(.635)
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
WVDC
Cap
Cap
Code
Cap
Cap
Code
1.0pF
109
100pF
101
1.2
129
120
121
1.5
159
150
151
1.8
189
180
181
2.2
229
220
221
2.7
279
270
271
3.3
339
330
331
3.9
399
390
391
4.7
479
470
471
5.6
569
560
561
6.8
689
680
8.2
829
820
821
10
100
1000
102
12
120
1200
122
15
150
1500
152
18
180
1800
182
22
220
2200
222
27
270
2700
272
33
330
3300
332
39
390
3900
392
47
470
4700
472
56
560
5600
562
68
680
6800
682
82
820
8200
822
100
101
.010uF
103
120
121
.012
123
150
151
.015
153
180
181
.018
183
220
221
.022
223
270
271
.027
273
330
331
.033
333
390
391
.039
393
470
471
.047
473
560
561
.056
563
680
681
.068
683
820
821
.082
823
1000
102
.10
104
1200
122
.12
124
1500
152
.15
154
1800
182
.18
184
2200
222
.22
224
2700
272
.27
274
3300
332
.33
334
3900
392
.39
394
4700
472
.47
474
5600
562
.56
564
6800
682
.68
684
8200
822
.82
824
.010uF
103
1.0
105
.012
123
1.2
125
.015
153
1.5
155
.018
183
1.8
185
.022
223
2.2
225
.027
273
2.7
275
.033
333
3.3
335
.039
393
3.9
395
.047
473
4.7
475
.056
563
.068
683
.082
823
.10
104
.12
124
.15
154
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
681
7
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH TEMPERATURE (+200ºC), HIGH VOLTAGE
RADIAL CERAMIC CAPACITORS HV SERIES
CAPACITOR OUTLINE DRAWING
FEATURES
The HV series not only withstands high temperatures
(200°C) , but also offers high voltage (500-4000 VDC)
L
To be used in robust applications
T
H
• Down Hole
• Industrial
• Harsh Environments
1.25
Min.
NOTE:
Other tolerances, higher capacitance values, voltages, or special
package configurations are available upon request.
S
DIMENSIONS
Style
HV10
HV11
HV12
HV13
HV14
HV15
HV16
Sizes in Inches (mm) max.
Length (L)
.250 (6.35)
.320 (8.13)
.420 (10.67)
.520 (13.21)
.620 (15.75)
.720 (18.29)
.820 (20.83)
Height (H)
.220 (5.59)
.300 (7.62)
.400 (10.16)
.500 (12.70)
.500 (12.70)
.700 (17.78)
.700 (17.78)
Thickness (T)
.150 (3.81)
.250 (6.35)
.250 (6.35)
.300 (7.62)
.300 (7.62)
.300 (7.62)
.350 (8.89)
Lead Spacing
±0.030 (S)
.170 (4.32)
.200 (5.08)
.300 (7.62)
.400 (10.16)
.500 (12.70)
.600 (15.24)
.700 (17.78)
PART NUMBER AND ORDERING INFORMATION
10 HV12 B 472
VOLTAGE
05=500V
10=1000V
20=2000V
30=3000V
40=4000V
K
C
M
GROUP A SCREENING*
Add to part number if required
*MIL-PRF-49467 (Subgroup 1) except Corona
OPTIONAL COPPER LEAD
Solder coated. Add to part
number only if required
MARKING
(HV10, HV11)
472M
KEC
Date Code
STYLE
HV12, etc
TEMPERATURE
COEFFICIENT
B, W=X7R type
N=C0G (NP0)
TOLERANCE
J=±5%
K=±10%
M=±20%
Other tolerances available upon request
(All other sizes)
HV12B472M
1kV
KEC
Date Code
CAPACITANCE VALUE
First two digits are significant, last digit is
number of zeros, i.e., 472=4700pF
8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH TEMPERATURE (+200ºC), HIGH VOLTAGE
RADIAL CERAMIC CAPACITORS HV SERIES
COG DIELECTRIC
9
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE RADIAL CONFORMALLY
COATED CERAMIC CAPACITORS HV SERIES
CAPACITOR OUTLINE DRAWING
L
DIMENSIONS
T
HV20
HV21
HV22
HV23
HV24
HV25
HV26
HV30
HV31
HV33
HV34
HV35
HV36
H
1.25
Min.
S
Sizes in Inches (mm) max.
Style
.025 (22 ga.) solder plated
Cu-clad Steel (CCFE)
Length (L)
Height (H)
.250 (6.35)
.320 (8.13)
.370 (9.40)
.470 (11.94)
.570 (14.48)
.670 (17.02)
.770 (19.56)
.450 (11.43)
.550 (13.97)
.850 (21.59)
1.050 (26.67)
1.250 (31.75)
1.450 (36.83)
.220 (5.59)
.280 (7.11)
.300 (7.62)
.400 (10.16)
.500 (12.70)
.600 (15.24)
.720 (18.29)
.220 (5.59)
.280 (7.11)
.400 (10.16)
.500 (12.70)
.600 (15.24)
.720 (18.29)
Thickness (T)
.200
.250
.250
.270
.270
.270
.270
.200
.250
.270
.270
.270
.270
(5.08)
(6.35)
(6.35)
(6.89)
(6.89)
(6.89)
(6.89)
(5.08)
(6.35)
(6.89)
(6.89)
(6.89)
(6.89)
Lead Spacing
±0.030 (S)
.170 (4.32)
.220 (5.59)
.275 (6.98)
.375 (9.52)
.475 (12.06)
.575 (14.60)
.675 (17.14)
.300 (7.62)
.400 (10.16)
.700 (17.78)
.975 (24.76)
1.175 (29.84)
1.375 (34.92)
PART NUMBER AND ORDERING INFORMATION
10 HV23 N 102
K
M
GROUP A SCREENING
VOLTAGE
05
10
20
30
= 500V
= 1000V
= 2000V
= 3000V
Add to part number only if required MILPRF-49467 (subgroup1) except Corona
40 = 4000V
50 = 5000V
75 = 7500V
100 = 10000V
TOLERANCE
COG
J=±5%
K=±10%
M=±20%
STYLE
HV23, etc.
X7R
K=±10%
M=±20%
P=0/+100%
Z= -20/+80%
Other tolerances available upon request
DIELECTRIC MATERIAL
CAPACITANCE VALUE
N = COG (NPO)
B = X7R
First two digits are significant, last digit is
number of zeros, i.e., 102=1000pF
MARKING
(HV20, HV21)
103K
1 kV
KEC
Date Code
(All Other Sizes)
HV24A103K
1 kV
KEC
Date Code
10
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE RADIAL CONFORMALLY
COATED CERAMIC CAPACITORS HV SERIES
COG DIELECTRIC
11
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE RADIAL CONFORMALLY
COATED CERAMIC CAPACITORS HV SERIES
COG DIELECTRIC
12
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE RADIAL CONFORMALLY
COATED CERAMIC CAPACITORS HV SERIES
X7R DIELECTRIC
13
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE RADIAL CONFORMALLY
COATED CERAMIC CAPACITORS HV SERIES
X7R DIELECTRIC
14
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT)
HV SERIES
FEATURES
CAPACITOR OUTLINE DRAWING
1. Electrical characteristics and environmental information on these parts may
be obtained by referring to MIL-PRF-49467.
2. All parts are conformal coated multilayer ceramic.
3. Designed to provide excellent long-term reliability.
4. Parts are Group A screened per MIL-PRF-49467 which includes 100%
Corona testing and meet all other specification requirements.
5. Designed for surface, sea and airborne military and commercial
high-reliability applications.
6. No IR degradation over life.
7. BR (X7R) V/TC is -40% at rated voltage and BZ (X7R) V/TC is -40% at
60% rated voltage.
8. BX characteristic (-25%) on BR parts is approximately 52% rated voltage.
9. 100% Non-destructive test by means of CSAM inspection available.
SLAM available by special order.
L
W
H
1.25
Min.
S
.025 (22 ga.) solder plated
Cu-clad Steel (CCFE)
DIMENSIONS
Style
HV60
HV61
HV62
HV63
HV64
HV65
HV66
HV68
HV69
Sizes in Inches (mm) max.
Length (L)
Height (H)
.250 (6.35)
.320 (8.13)
.370 (9.40)
.470 (11.94)
.570 (14.48)
.670 (17.02)
.770 (19.56)
1.300 (33.02)
1.500 (38.10)
.220 (5.59)
.280 (7.11)
.300 (7.62)
.400 (10.16)
.500 (12.70)
.600 (15.24)
.720 (18.29)
.600 (15.24)
.720 (18.29)
Thickness (W)
.200
.250
.250
.270
.270
.270
.270
.270
.270
(5.08)
(6.35)
(6.35)
(6.86)
(6.86)
(6.86)
(6.86)
(6.86)
(6.86)
Lead Spacing
±0.030 (S)
.170 (4.32)
.220 (5.59)
.275 (6.98)
.375 (9.52)
.475 (12.06)
.575 (14.60)
.675 (17.14)
1.175 (29.84)
1.375 (34.92)
PART NUMBER AND ORDERING INFORMATION
10
HV60
R
102
K
Voltage
06
10
20
30
=
=
=
=
600V
1000V
2000V
3000V
C
C=CSAM
40 = 4000V
50 = 5000V
S= SLAM
Add to part number if required.
Tolerance
(C0G only) J=±5%
K=±10%
M=±20%
Style
HV60, etc.
Dielectric
Capacitance Value
P = BP C0G (NP0)
R = BR (X7R)
Z = BZ (X7R)
First two digits are significant,
last digit is number of zeros,
i.e., 102=1000pF
MARKING
(All Other Sizes)
(HV60, HV61)
102K
HV63R102K
1 kV
1 kV
KEC
KEC
Date Code
Date Code
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
15
HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT)
HV SERIES
COG DIELECTRIC
16
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT)
HV SERIES
X7R DIELECTRIC
17
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)
HS SERIES
CAPACITOR OUTLINE DRAWING
FEATURES
W
L
1. Similar to NASA Spec. SSQ 21113 (1, 2 & 5kV).
2. Conforms to MIL-PRF-49467. (Group A Screening,
Subgroup 1)
3. 100% Corona tested.
4. No IR degradation over life.
5. High density, low DF ceramic.
6. Conservative and proven design is recommended for
non-repairable applications such as spacecraft.
7. CSAM inspections are available and is recommended for
space applications. SLAM available by special order.
8. Burn-in in a non-contaminating inert fluid available.
DIMENSIONS
Sizes in Inches (mm) max.
Length (L)
Height (H)
Thickness (W)
Lead Spacing
±0.030 (S)
HS20
.250 (6.35)
.220 (5.59)
.200 (5.08)
.170 (4.32)
HS21
.320 (8.13)
.280 (7.11)
.250 (6.35)
.220 (5.59)
HS22
.370 (9.40)
.300 (7.62)
.250 (6.35)
.275 (6.98)
HS30
.450 (11.43)
.220 (5.59)
.200 (5.08)
.300 (7.62)
HS23
.470 (11.94)
.400 (10.16)
.270 (6.89)
.375 (9.52)
HS31
.550 (13.97)
.280 (7.11)
.250 (6.35)
.400 (10.16)
HS24
.570 (14.48)
.500 (12.70)
.270 (6.89)
.475 (12.06)
HS25
.670 (17.02)
.600 (15.24)
.270 (6.89)
.575 (14.60)
HS26
.770 (19.56)
.720 (18.29)
.270 (6.89)
.675 (17.14)
HS33
.850 (21.59)
.400 (10.16)
.270 (6.89)
.700 (17.78)
HS34
1.050 (26.67)
.500 (12.70)
.270 (6.89)
.975 (24.76)
HS35
1.250 (31.75)
.600 (15.24)
.270 (6.89)
1.175 (29.84)
HS36
1.450 (36.83)
.720 (18.29)
.270 (6.89)
1.375 (34.92)
Style
PART NUMBER AND ORDERING INFORMATION
10
VOLTAGE
05 = 500V
10 = 1000V
20 = 2000V
30 = 3000V
HS24
B
103
K
F
INERT LIQUID (BURN-IN)
Std. for >2kV;
Add “F” if required
for 500V or 1kV parts
40 = 4000V
50 = 5000V
75 = 7500V
100 = 10,000V
C=CSAM
S=SLAM
Add to part number if
required.
STYLE
HS24, etc.
DIELECTRIC
B = X7R
N = BP C0G (NP0)
CAPACITANCE VALUE
First two digits are significant,
last digit is number of zeros,
i.e., 103=10000pF
C
MARKING
(HS20, HV21)
(All Other Sizes)
103K
HS24B103K
1 kV
1 kV
KEC
KEC
Date Code
Date Code
TOLERANCE
J = ±5% (C0G only)
K = ±10%
M = ±20%
P = 0/+100%
Z = -20%/+80%
18
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)
HS SERIES
COG DIELECTRIC
19
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)
HS SERIES
COG DIELECTRIC
20
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)
HS SERIES
X7R DIELECTRIC
21
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)
HS SERIES
X7R DIELECTRIC
22
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE CERAMIC CHIP (+125ºC)
Military Equivalent
CERAMIC CHIP OUTLINE DRAWING
FEATURES
1. The ceramic chip capacitors described in this section are the types used
in our other high voltage ceramic multilayer product lines.
2. Types BP, BR and BZ available as described in MIL-PRF-49467.
3. Group A and B screening per MIL-PRF-49467 available.
4. Ceramic chip capacitors are extremely sensitive to thermal shock damage
during installation. Wherever possible, processes involving infrared or
vapor phase soldering systems should be utilized.
5. Higher voltages available upon request
6. Where nickel barrier termination is required, end band length dimensions
may exceed the standard dimension listed.
BW
DIMENSIONS
Style
Length (L)
Inches (mm)
Width (W)
Inches (mm)
1515
1812
1825
2020
2225
2520
3333
3530
4040
4540
5440
5550
6560
.150 ±.015 (3.81 ±.38)
.180 ±.020 (4.57 ±.51)
.180 ±.020 (4.57 ±.51)
.200 ±.020 (5.08 ±.51)
.220 ±.020 (5.59 ±.51)
.250 ±.020 (6.35 ±.51)
.330 ±.030 (8.38 ±.76)
.350 ±.030 (8.89 ±.76)
.400 ±.030 (10.2 ±.76)
.450 ±.030 (11.43 ±.76)
.540 ±.030 (13.7 ±.76)
.550 ±.030 (14.0 ±.76)
.650 ±.030 (16.5 ±.76)
.150
.120
.250
.200
.250
.200
.330
.300
.400
.400
.400
.500
.600
±.015
±.015
±.020
±.020
±.020
±.020
±.030
±.030
±.030
±.030
±.030
±.030
±.030
(3.81
(3.05
(6.35
(5.08
(6.35
(5.08
(8.38
(7.62
(10.2
(10.2
(10.2
(12.7
(15.2
Thickness (T) max
Inches (mm)
±.38)
±.38)
±.51)
±.51)
±.51)
±.51)
±.76)
±.76)
±.76)
±.76)
±.76)
±.76)
±.76)
.140
.100
.160
.180
.200
.180
.220
.220
.220
.220
.220
.220
.220
Bandwidth (BW)
Inches
.010
.010
.010
.010
.010
.030
.030
.030
.030
.030
.030
.030
.030
(3.55)
(2.54)
(4.07)
(3.55)
(5.08)
(4.57)
(5.59)
(5.59)
(5.59)
(5.59)
(5.59)
(5.59)
(5.59)
-
.030”
.040”
.040”
.040”
.040”
.060”
.060”
.060”
.060”
.060”
.060”
.060”
.060”
RECOMMENDED SOLDER PAD PATTERN DIMENSIONS
5.20
5.90
5.90
6.50
7.00
8.68
10.91
11.51
12.88
14.21
16.51
18.92
19.80
0.205
0.232
0.232
0.256
0.276
0.342
0.430
0.453
0.507
0.559
0.650
0.745
0.780
1.90
2.30
2.30
2.80
3.30
4.98
7.11
7.61
8.88
10.15
10.41
12.82
13.20
0.075
0.091
0.091
0.110
0.130
0.196
0.280
0.300
0.350
0.400
0.410
0.505
0.520
4.34
3.70
6.90
5.62
6.80
5.62
9.27
8.51
11.05
11.05
11.05
13.59
16.13
0.171
0.146
0.272
0.221
0.268
0.221
0.365
0.335
0.435
0.435
0.435
0.535
0.635
1.65
1.80
1.80
1.85
1.85
1.85
1.90
1.95
2.00
2.03
3.05
3.05
3.30
0.065
0.071
0.071
0.073
0.073
0.073
0.075
0.077
0.079
0.080
0.120
0.120
0.130
T
W
1515
1812
1825
2020
2225
2520
3333
3530
4040
4540
5440
5550
6560
L
S
L
PART NUMBER AND ORDERING INFORMATION
4540
B
472
M
202
P
M
Style
Group A Screening*
1515, 2020, etc.
Add to part number if required
*MIL-PRF-49467
(subgroup 1)
except Corona
Dielectric
B or R = X7R
N = C0G (NP0)
Terminal Material
P = PdAg
S = Ag
E = Ag/Ni/SnPb Plate
C = Ag/Ni/Sn Plate
Capacitance Value
First two digits are significant,
last digit is number of zeros,
i.e., 472=4700pF
Tolerance
J = ±5% C0G (NP0)
K = ±10%
M = ±20%
P = 0/+100%
Z = -20%/+80%
Voltage
MARKING
Not applicable
As required by customer only.
First two digits are significant,
last digit is number of zeros,
i.e., 202=2000V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
23
HIGH VOLTAGE CERAMIC CHIP (+125ºC)
Military Equivalent
C0G DIELECTRIC
24
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE CERAMIC CHIP (+125ºC)
Military Equivalent
C0G DIELECTRIC
25
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE CERAMIC CHIP (+125ºC)
Military Equivalent
X7R DIELECTRIC
26
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE CERAMIC CHIP (+125ºC)
Military Equivalent
X7R DIELECTRIC
27
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR
SM SERIES
CAPACITOR OUTLINE DRAWING
FEATURES
STANDARD
1. Silver plated copper alloy terminal for easy soldering.
2. Mounting tabs are designed to minimize the effect of thermal
stress introduced by the differences in coefficient of thermal
expansion between the capacitor and the mounting surface.
3. Low ESR.
4. High current discharge capability.
5. Group A and B screening per MIL-PRF-49467 available .
6. Standard lead configuration is 'B'.(J) If lead configuration is
left out of part number the lead style is assumed to be 'B'.
(L)
(J)
(L)
(J)
DIMENSIONS
Style
Length (L)
Inches (mm)
Width (W)
Inches (mm)
SM20
SM21
SM22
SM23
SM24
SM25
SM26
SM30
SM31
SM33
SM34
SM35
SM36
.150 ±.015 (3.81 ±.38)
.200 ±.020 (5.08 ±.51)
.250 ±.020 (6.35 ±.51)
.350 ±.030 (8.89 ±.76)
.450 ±.030 (11.43 ±.76)
.550 ±.030 (14.00 ±.76)
.650 ±.030 (16.50 ±.76)
.300 ±.030 (7.62 ±.76)
.400 ±.030 (10.20 ±.76)
.700 ±.030 (17.08 ±.76)
.900 ±.030 (22.90 ±.76)
1.100 ±.030 (27.90 ±.76)
1.350 ±.030 (33.00 ±.76)
.150 ±.015 (3.81 ± .38)
.200 ±.020 (5.08 ± .51)
.200 ±.020 (5.08 ± .51)
.300 ±.030 (7.62 ± .76)
.400 ±.030 (10.20 ± .76)
.500 ±.030 (12.70 ± .76)
.600 ±.030 (15.20 ± .76)
.150 ±.015 (3.81 ± .38)
.200 ±.020 (5.08 ± .51)
.300 ±.030 (7.62 ± .76)
.400 ±.030 (10.20 ±. 76)
.500 ±.030 (12.70 ±. 76)
.600 ±.030 (15.20 ±. 76)
Thickness (T) max
Inches (mm)
.130
.180
.180
.220
.220
.220
.220
.140
.130
.180
.220
.220
.220
(3.30)
(4.57)
(4.57)
(5.59)
(5.59)
(5.59)
(5.59)
(3.55)
(3.30)
(4.57)
(5.59)
(5.59)
(5.59)
Tab (A) max
Inches (mm)
.100
.100
.100
.200
.300
.400
.500
.100
.100
.200
.300
.400
.500
(2.54)
(2.54)
(2.54)
(5.08)
(7.62)
(10.2)
(12.7)
(2.54)
(2.54)
(5.08)
(7.62)
(10.2)
(12.7)
PART NUMBER AND ORDERING INFORMATION
SM24
B
472
M
202
Style
M
Group A
Screening*
SM24, etc.
Add to part
number if required
*MIL-PRF-49467
(subgroup 1)
except Corona
Dielectric
B = X7R
N = C0G (NP0)
Capacitance Value
Configuration
First two digits are significant,
last digit is number of zeros,
i.e., 472=4700pF
A=Config (L)
B=Config (J)
Voltage
Tolerance
J = ±5% C0G (NP0)
K = ±10%
M = ±20%
P = 0/+100%
Z = -20%/+80%
A
MARKING
Not applicable
As required by
customer only.
First two digits are
significant, last digit
is number of zeros,
i.e., 202=2000V
28
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR
SM SERIES
C0G DIELECTRIC
29
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR
SM SERIES
C0G DIELECTRIC
30
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR
SM SERIES
X7R DIELECTRIC
31
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR
SM SERIES
X7R DIELECTRIC
32
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
工商网监
湘ICP备2023018690号
